Printed Glass Dealers in Bangalore

• Country of Origin: India
• Pattern: Printed
• Condition: New
• Brand Name: Mekup & Rekup
• Thickness: 180 GSM
• Height: 4 Inch
• Top diameter: 3 Inch
• Bottom Diameter: 2 Inch
• Material: Paper

Ceramic Frit Glass - Ceramic frit is applied to the glass through a fine mesh screen with glass enamel before the glass is tempered or heat strengthened. On tempering or heat strengthening, the glass enamel fuses into the glass surface and becomes a permanent coating which cannot be damaged or removed by cleaning or scrubbing etc.Silk-screened glass can be specified for both exterior and interior applications. When used on building exteriors, the painted surface must be protected from direct contact with the environment and is normally found in an insulating glass unit. Combining silk-screened glass with clear, tinted, Low-E, or reflective glass, can control light transmittance; reduce solar heat gain and its aesthetic and performance characteristics are enhanced. CERAMIC FRIT PROCESS:Silk-screening involves washing the annealed glass and then the ceramic frit paint is applied to the interior (non-weather) side of the glass. Frit consists of tiny glass particles, pigments and various chemicals for the curing. Ceramic frit is fired within a tempering furnace to create a permanent coating. The glass is always either heat strengthened or fully tempered to prevent glass breakage due to thermal stresses. Ceramic frit can be positioned in Face 2, 3 or 4 for optimum solar performance. The results are an increase in solar absorption on the interior glass ply and a lower shading coefficient. Silk-screening on these two surfaces becomes more apparent from the interior during nighttime conditions, which complements indirect interior lighting. Ceramic frit can be combined with clear or tinted glass substrates, as well as with high-performance coatings to reduce glare and decrease solar transmission.    THE APLICATIONS OF CERAMIC PRINTED GLASS:   · Applications include transparent and translucent silk-screened glass for interior applications, including glass doors, partitions, handrails, glass ceilings, bathrooms, elevator walls and shower enclosures. · Ceramic frit glass used in curtain walls; point fixed or bolted glazing systems, shower installations, glass doors and partitions. The size, density and color would determine the opacity and shading whereas the variety of dots, squares, checks and patterns will give many design combinations to achieve the desired effect.

• Material: Paper
• Color: PRINTED
• Brand Name: BPC
• Pattern: Printed
• Thickness: 165mm
• Country of Origin: Made in India
• Capacity Gram: 150gm
• Features: HOT AND COLD

Digital Ceramic printing is an unmatched process technology. Distinctive and lasting impression on building facades. In modern architecture, glass is increasingly used as decorative materials also. There are no end to the possibilities of patterns or designs and colours with regard to screen printing which enables a perfect application to the expectation of the client. High resistance to the weather and chemicals. Multi-color printing in single pass. Process: When using ceramic frit based inks, the glass is fired or tempered to fuse the inks with the glass. Due to the extreme temperature of this process there is first a decomposition of organic additives and binders of the ink. Next there is a fusion of the frit to the substrate and pigments followed by the expulsion of voids to give a compacted structure. Lastly there is a formation of a surface with the desire properties. A successful firing of a glass and ceramic ink will result in a bubble free layer of constant thickness and homogeneous pigment dispersion within the glass. ADVANTAGES Special effects can be created by applying solid and translucent layers of ink, Edge to Edge Printing, Ceramic inks in a wide range of colours usable for indoor as well as outdoor applications. etc. Glass facades of building and skylights filling of railings and balconies internal wall and door systems, glass stairs, table tops shower cabins, showroom partitions etc.

• Thickness: 5 mm
• Country of Origin: Made in India
• Design/Pattern: Digital Printed
• Size: 4-6 Feet
• Design: Printed
• Etching: YES
• Finish: Glossy
• Material: Glass
• Brand Name: Saint Gobain and Modi Guard

Color Printing Glass, projection film, Shower Panel, Building Tempered Glass

ceramic printed glass, Heat Strengthened Glass, Fire Resistant Glass

Paper Printed Coffee Glass, Plastic Plain Tumbler, paper cup lids

Printed Paper Glass, Rubber Band, Cold Drink Paper Cup, disposable juice cup

ceramic printed glass

L & F Printed Glass No. 7, Commander Laundry Basket, Caption Laundry Basket