Process Control Equipment Dealers in Doddanekundi, Bangalore

The Zigbee Development kit is based 2.4GHz IEEE 802.15.4 compliant System-on-Chip, the CC2538CC2650 from Texas Instruments. It acts as a ready platform to just get started with Zigbee or to build a ZigBee compliant product.

Features   Enclosure – IP54 category Wide MPPT Range Automatic Start & Stop based on solar Irradiation Max I/P Voltage Model: 800V Ground water extraction for Irrigation, Commercial and Household use Particulate filter for air intake and exhaust 3 hp, 5hp, 7hp & 10hp Dry run protection IEC 61683/IS 61683 & IEC 60068-2(1,2,14,30) 5 Years Warranty Suitable for both Open Well and Tube Well MC4 connector for Solar input

This is the simplest Basic water level Controller with indicator it is the most economical and energy efficient product from RGR Technologies. Visual Indications : Two sump levels, Two over head tank indication. Flow, motor on, dry run, power on.Features: The water level controller can switch on or switch off the pump, to maintain the pre defined water level at the storage tanks. Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. Its has the following unique feature:1) When tank is in reserve mode or empty it automatically starts the motors if water is present in the Sump tank.2) If water is present in the line it indicates the presence on the unit (Flow Indicator).3) It indicates water levels reaching in tank, which is helpful if there are open taps, blockage, leakage or damage in the pipeline connected to the upper head, ground or the desired storage tank.4) It green colored 2 level indications (half tank & full tank) of water in tank as well as 2 level indications (foot valve level & half tank) of sump tank.5) On motor symbol green colored indication for motor ON & red colored indication for dry run of motor. 6) Has rocker switch to select Auto/manual operation. 7) Has soft touch ‘NEED’ button to switch ON the motor irrespective of any level in the overhead tank. Application: mono block pumps (sump motors)System is suitable only for single phase pump sets of maximum 1 H. P. ratings. This Water level controllers Indicator is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc. At large our systems not only help you but your neighbors and society, also as it reduces the wastage of water by cutting down any further overflow than what you need.

Programmable Logic Controllers, Planetary Gearheads, Single Axis Robot

Process Control Instruments, process control equipment, Blowers, lt motors

Conductivity Controller, vibrator controller, automobile part

Temperature Controllers, Thermocouples, rtds, thyistor power packs, Burners

Water Level Controller, Inverter, Solar Water Heater

Temperature Controllers, non ferrous melting furnaces, Thermocouples

Programmable Logic Controller, educational models

Automatic Water Level Controller, Automatic Water Level Controller

AC Servo Systems, Stainless Steel Shock Absorbers, Automotive Shock Absorber

Solar Pump Controller, Programmable DC Power Supplies