Process Control Equipment Dealers in Peenya, Bangalore

Vacuum Temperature Controller is used for controlling heat in laboratory. A  Vacuum Temperature Controller constantly adapts to the pump’s volume flow rate to process the requirement. The maximum flow volume here is maintained through Vacuum Temperature Controller. We supply high quality Vacuum Temperature Controller that is tested on stringent quality parameters before dispatch.

• Voltage: 100 To 240 VAC
• Frequency: 50/60 Hz
• Brand Name: Omron
• Current flow: 7 mA

Crane Control Equipments suitably adjusted on a Cam Shaft which rotateswith fixed speed ratio of the drive Motor Shaft. The Cams can besuitably positioned so that they trip motor supply and stop the motion at the required point of travel.

We offer Thermocouple. Model Number : CEL-TC Description : CEL-Thermocouple is a temperature-measuring device consisting of two dissimilar conductors that contact each other at one or more spots. It produces a voltage when the temperature of one of the spots differs from the reference temperature at other parts of the circuit. Thermocouples are a widely used type of temperature sensor for measurement and control,

• Feature: High quality, Accurate indication, optimum performance and long service life

Maxchek 400 is a smart maximum demand controller with standard size 96x96 mm specifically designed for industries to keep a check on their maximum demand. It gives an alarm when demand approaches a preset value and also switches off non-essential loads in a pre-programmed logical sequence. This predictive maximum demand controller (MDC) allows stage wise load restoration to maximize the use of a sanctioned load. Maxchek 400 is most suitable for the demand control of industrial consumers, HT consumers and commercial establishments. It also supports ethernet module for communication.  Application Commercial and industrial sanctioned demand monitoring & controlling applications. Control panels for complete plant demand controlling. Demand management for commerce and industry.   Benefits Easy interface with external devices through built-in Modbus (RS-485/Ethernet). Detachable connectors for easy installation.

• Accuracy: 0.6°C or 0.1%

A Thermocouple is a sensor used to measure temperature. Thermocouples consist of two wire legs made from different metals. These wire legs are welded together at one end, creating a junction. This junction is where the temperature is measured.

• Model Number: MAXVU16
• Brand Name: WEST
• Application: Temperature and Process Controller
• Voltage: 100 to 240V 50/60Hz +/- 10% (mains powered version) 24V DC/AC +10%/-15%, AC 50/60Hz (low voltage ver
• Accuracy: Thermocouple +-0.25% of full range +-1 LSD (+-1 DegreeC for thermocouple CJC). PT100 +-0.25% of full range, +-1
• Type: Analog
• Size: 48*48 mm
• Color: BLACK ,GREEN
• Display Type: SEVEN SEGMENT MULTI COLOUR
• Item Code: MAXVU16
• Temperature Range: Thermocouple (J,K,C,R,S,T,B,L,N), RTD (3 Wire PT100), DC Linear (0 to 20mA, 4 to 20mA, 0 to 50mV, 10
• Controller Function Type: ON-off
• Input Sensor: Thermocouple (J,K,C,R,S,T,B,L,N), RTD (3 Wire PT100), DC Linear (0 to 20mA, 4 to 20mA, 0 to 50mV, 10
• Humidity: 0 to 55 DegreeC (-20 to 80 DegreeC storage), 20% to 95% RH non-condensing
• Control Output: Relay, SSR
•  :  

Global Energy Management Solutions India Private Limited (Circutor INDIA) is engaged in manufacturing a qualitative range of Maximum Demand Controller which is widely acclaimed in the electricity and power industries. Our Maximum Demand Controller results in the most efficient utilization of energy and is quite economical. We provide a prompt delivery to our clients.

Manufacturer of a wide range of products which include Conductivity Indicating Controller - ATN CD 09, Conductivity Indicating Controllers Model: ATN CD 912, Conductivity Indicating Transmitter - Field - ATN CD..

We offer our clients an excellent quality range of Digital Temperature Indicator, which are manufactured from high grade quality raw materials. This Digital Temperature Indicator is broadly admired for their quality, longer life and hassle free performance. Our products are also delivered to our clients on a timely basis to ensure complete satisfaction with not just our products but also services. These are procurable at leading industry rates. Features:   Use the advanced technology Top notch performance Supreme quality

Walchem's WebMaster integrates advanced sensing, instrumentation, fluid handling, and data communication technologies to bring you the most sophisticated cooling tower & boiler controller in the water treatment industry. The simple, intuitive programming makes it easy to configure your WebMaster to control multiple cooling towers, boilers, closed loops, or virtually any water treatment process. It will monitor and control based on a wide range of direct sensor inputs as well as measurement inputs from other devices such as corrosion, level, temperature, and pressure. An extensive assortment of integrated communications and data handling features are included that enable water treatment professionals to provide more effective water management services to their customers. Technical Details  Material of construction: thermoplastic/NEMA 4X; display - 64 x 128 pixel backlit LCD Range: WIND8, WMT, WMB, WM18 pH range: - 2 to 16 ORP range: -1400 mV to1400 mV Conductivity range: 1000 to 10,000 μS/cm   Applications  Cooling tower/boiler controllers Industrial water treatment controllers Disinfection Pools/spas   Key Features  Modbus read/write process management and SCADA system Centralised 24/7 awareness of account status Access live or stored data remotely Ability to connect LIVE to any of your controllers in the field The most advanced cooling tower/boiler controller in the water treatment industry Instant alarm notification via cell phone text message, email, or local alarm relay

• Features: High performance solid state instruments , Accurate results , Long life.

• Humidity Control Range: 5% to 80% RH
• Air Inlet Flow Rate: 3 liters per minute (Max)
• In/Out Port Size: Suits 8 mm OD tubing
• Operating Temperature: 10 to 45 Deg C
• Accuracy: 1 +/- 1% measured value, % RH
• Least Count: 2% RH

Tribological properties of materials can greatly be influenced by humidity. Coatings like Diamond like Carbon (DLC) see great use in a variety of applications ranging from hard drives and automotive engines to biomedical applications. Each of these applications presents very different operating conditions which includes humidity conditions. DLC is also known to have friction properties that vary greatly with humidity. It is therefore extremely important to characterize materials for their tribological properties by including their performance dependency on parameters like humidity. The Ducom Humidity Generator is a stand-alone system that can easily be plugged into any compatible Ducom Tribometer. This extends the capability of your existing or new tribometer to include the ability to carry out tests and understand material behavior under a variety of humidity conditions. The Ducom Humidity Controller is capable of producing an output of dry or humid air to control conditions within the test area. A combination of dry and humid air is used to create an environment of the required RH. The Humidity Controller comes with a humidity sensor that is placed within the test area and requires oil free and dust free pneumatic input. The system is self-contained with respect to drying and humidification systems and requires very little maintenance. For proper operation, the tribometer is required to have a Humidity Controller compatible enclosure.   Features     Standalone unit Portable, accurate and reliable Easy to handle and maintain Versatile – can be used with a variety of Ducom tribometers and also other compatible systems.   Applications     Characterization of coatings like DLC. Improved accuracy for standard tests by controlling humidity. Evaluating frictional properties of materials sensitive to humidity.

These are size fit all controller. packed with speed, memory & flexibility this controller is ultimate interface between your load cell and your dream application In built with most of the required inputs and outputs this controller is now available for the following application Tank weighing system Flow meter indicator / controller Bagging system Batching system Belt weighing scale Being young it is being groomed for application like Weigh feeder Loss in weigh feeder Doering system And various customized application

oil temperature indicator, centralised lubrication systems

• Type: Digital Temperature Indicators
• Material: Alloy Steel, Brass, Iron, Stainless Steel, Steel
• Voltage: 0-6VDC, 6-12VDC
• Condition: New, Used
• Display Type: Digital
• Driven Type: Battery Use
• Feature: Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Robust Construction, Rust Proof
• Measuring Range: 0-50Deg C, 50-100Deg C
• Automation Grade: Automatic, Manual

This is a micro controller instrument with 3-in-one combination in compact size.

• Brand Name: Omega
• Type: Digital
• Size: 48*96 mm

• Color: GRAY
• Mounting Type: DIN Rail Mount, Panel Mount, Screw Mount
• Features: Require Less Maintenance, High Demand, High Speed
• Model Number/Name: NPA01
• Range: 0-3m, 3-5m
• IP Rating: IP68

• Features: Light weight, Easy to use, Fine quality.

We are offering thermocouple. Thermocouples are the sensors used to receive the signal from the heating area in directly proportional to the rise of temperature. These are two dismillar metals joints to form one junction and produce milli volt directly proportional to the rise in temperature. We manufacture j,k,r,s,n and any other type.

time controllers, Electromagnetic Relays, Voltmeters

dc motor controllers, industrial automation products, Proximity Sensors

• Temperature Range: 0 to 400°C, 0 to 600°C, 0 to 1200°C

We are Leading Manufacturers and Suppliers of All types of Thermo Couples. According to Clients orders we will manufacture different sizes raging with Dia 3mm, 4mm, 5mm, 6mm, 10mm, 22mm,

• Color: Grey
• Condition: New
• Automatic Grade: Automatic
• Features: Optimum Performance, Perfect Finish, High Quality

• Voltage: 24 VAC/DC
• Country of Origin: Made in India
• Size: 48 x 96 mm
• Control Type: PID/On-Off
• Input Type: Current (mA)
• Control output Type: Relay/SSR
• Frequency: 50/60 Hz
• Weight: 0.25 kg

Digital Temperature controller is an instrument used to control temperature. Temperature Controllers are required in almost all the industrial processes where temperature has to be kept constant to heat an object or to perform a certain processes. The device particularly came into existence to provide a constant temperature to some of the electro chemical processes. Temperature Controller is one of the most essential elements of every industry and machinery where temperature control and monitoring are required. SRI Electronics is a qualitative Temperature Controller Manufacturers of all specifications. Our Digital Temperature Controllers are highly noticed in market for its features such as efficiency, performance, accuracy and durability. Manufactured at our highly sophisticated infrastructure units using excellent quality input and superior technology, these products assist in accurate measurements. We being one of the well known temperature controller manufacturers; have supplied our products to several industries across the country. Universal Type of Temperature Controller: 48/48 Size 72/72 Size 96/96 Size 96/48 Size

• Feature: Compact design,Versatile,Easy to operate
• Brand Name: Lakshmi Electro controls