Process Control Equipment Dealers in Yeshwanthpur, Bangalore

• Inputs: Universal all type of Thermocouple and RTD PT-100
• Output: Single Relay or Dual Relay output OR SSR Voltage, 4-20mA
• Control Action: ON/OFF
• Alarm: High‚ Low‚ High deviation and Low deviation
• Communication: RS-485, RS 232 (Modularized Installable)
• Re Transmission O/P: Linear current or voltage(SV OR PV)
• Power Supply: SMPS 100
• Panel Cutout Size: 96×96mm, 72×72mm, 48×48mm, 48×96mm, 96×48mm

Vacuum Temperature Controller is used for controlling heat in laboratory. A  Vacuum Temperature Controller constantly adapts to the pump’s volume flow rate to process the requirement. The maximum flow volume here is maintained through Vacuum Temperature Controller. We supply high quality Vacuum Temperature Controller that is tested on stringent quality parameters before dispatch.

• Material: Stainless Steel
• Color: Silver
• Accuracy: +-2.5 Degree C
• Temperature Range: 0-800 Degree C
• Voltage: 220 V
• Ambient Temperature: 85 deg C
• Sheath Diameter: 4.5 mm

The compact IPC with modular EtherCAT I/O system for automating real-time applications DIN rail mounted. Optimised processor performance of the latest ARM generation for synchronous motion control and fast switching and detecting of output and input signals. The C6 SMART offers, with a width of 47mm and additional four I/O modules and under 150mm space on the DIN rail, a compact IPC control system with 128 in- and outputs. The C6 SMART is designed for runtime environment and real-time capability. It allows control tasks that place high demands on performance and functionality, with the expectation to be cost-efficient. Detecting and switching of signals is realised without additional delay via the internal EtherCAT I/O module bus. Equipped with a multi-core processor, built-in Micro UPS, smart storage concept and many modular interfaces, C6 SMART is designed to handle all control system tasks.   Features:  EtherCAT  CoE Protocol Support for basic I/O and DS402 drives  Three display ports (DVI-I, Display Port, HDMI)  128 GB solid state drive (SSD)  Four 100/1000 Base T Ethernet ports  Two ports dedicated to Windows/Linux LAN  Two ports dedicated to Motion Core (i.e. one EtherCAT and one Modbus)Six USB ports with two of the ports USB 3.0 capable in the i7 version Two RS232/422/485 ports No fan or internal cabling Industrial aluminum casing Small form factor 10” × 6” × 2.7”, DIN-rail wall mount 9 – 36 VDC (+24 VDC @ 3 A) (Min 72 W) AT/ATX CE, UL, CCC, FCC, C-TICK, BSMI certiGed Two Mini PCIe Slots

• Type: K, R, Pt-100
• Temp. Range: -200 to +200°C, 0-400°C,0-1200°C,0-1600°C .
• Display: 4½ digit LCD - Alpha Numeric
• Power Supply: 9V Rechargable Battery

This is a compact programmable temperature indicator which can be carried anywhere for measuring temperature ranging from -180°C to + 1700oc. This instrument has alpha numeric display for temperature indication. Built in 9V battery and low battery indication. Calibrated for Thermocouples/RTDs.

• Brand Name: Omega
• Type: Digital
• Size: 48*96 mm

• Features: High performance solid state instruments , Accurate results , Long life.

  Being counted amongst the most prominent organizations, we are indulged in offering PLC SCADA Systems. The PLC SCADA Systems that we offer are known for having smooth and superlative performance level. In addition, these PLC SCADA Systems are available at competitive range. Features: Excellent service life Easy to operate Top quality

This is a micro controller instrument with 3-in-one combination in compact size.

Digital Temperature controller is an instrument used to control temperature. Temperature Controllers are required in almost all the industrial processes where temperature has to be kept constant to heat an object or to perform a certain processes. The device particularly came into existence to provide a constant temperature to some of the electro chemical processes. Temperature Controller is one of the most essential elements of every industry and machinery where temperature control and monitoring are required. SRI Electronics is a qualitative Temperature Controller Manufacturers of all specifications. Our Digital Temperature Controllers are highly noticed in market for its features such as efficiency, performance, accuracy and durability. Manufactured at our highly sophisticated infrastructure units using excellent quality input and superior technology, these products assist in accurate measurements. We being one of the well known temperature controller manufacturers; have supplied our products to several industries across the country. Universal Type of Temperature Controller: 48/48 Size 72/72 Size 96/96 Size 96/48 Size

DC drives are electrical instrument to control the speed of a DC Motor. It is also called as Motor speed controller or DC drive monitor. They are widely used in industries to control the motors which operate machines, pumps, cranes, conveyors etc. Using DC Drives the speed of the motors becomes adjustable as per the requirement. Our clients can avail from us quality range of DC Drive. Owing to unmatched quality and excellent features, these are appropriately used for monitoring of machines on-site. These are fabricated using superior quality input and latest technology in compliance with set quality standards. Our offered products facilitate reliable performance and are widely known for its accurate dimensions and better durability. Moreover, these are power efficient and are highly resistant to abrasion and corrosion. We are one of the prominent DC Drives Manufacturers in Bangalore.

• Humidity Control Range: 5% to 80% RH
• Air Inlet Flow Rate: 3 liters per minute (Max)
• In/Out Port Size: Suits 8 mm OD tubing
• Operating Temperature: 10 to 45 Deg C
• Accuracy: 1 +/- 1% measured value, % RH
• Least Count: 2% RH

Tribological properties of materials can greatly be influenced by humidity. Coatings like Diamond like Carbon (DLC) see great use in a variety of applications ranging from hard drives and automotive engines to biomedical applications. Each of these applications presents very different operating conditions which includes humidity conditions. DLC is also known to have friction properties that vary greatly with humidity. It is therefore extremely important to characterize materials for their tribological properties by including their performance dependency on parameters like humidity. The Ducom Humidity Generator is a stand-alone system that can easily be plugged into any compatible Ducom Tribometer. This extends the capability of your existing or new tribometer to include the ability to carry out tests and understand material behavior under a variety of humidity conditions. The Ducom Humidity Controller is capable of producing an output of dry or humid air to control conditions within the test area. A combination of dry and humid air is used to create an environment of the required RH. The Humidity Controller comes with a humidity sensor that is placed within the test area and requires oil free and dust free pneumatic input. The system is self-contained with respect to drying and humidification systems and requires very little maintenance. For proper operation, the tribometer is required to have a Humidity Controller compatible enclosure.   Features     Standalone unit Portable, accurate and reliable Easy to handle and maintain Versatile – can be used with a variety of Ducom tribometers and also other compatible systems.   Applications     Characterization of coatings like DLC. Improved accuracy for standard tests by controlling humidity. Evaluating frictional properties of materials sensitive to humidity.

Extensive catalog of motorized positioning With 50 years of precision mechanical design, fabrication and motion control experience and expertise, Newport has developed an extensive catalog of motorized positioning and motion control products. Field proven motorized positioners are found across a broad spectrum of applications.

• Feature: High quality, Accurate indication, optimum performance and long service life

With the constant effort and dedication of our workforce, we have carved a special position in offering Wall Mounted Temperature Indicator. Our provided product is automatically operated and used to display the temperature of devices with exact readings. Our offered product is available in various custom-made models to meet the variegated requirements. Features:   Superlative performance Easy to operate Quality product

Manufacturer of a wide range of products which include Conductivity Indicating Controller - ATN CD 09, Conductivity Indicating Controllers Model: ATN CD 912, Conductivity Indicating Transmitter - Field - ATN CD..

• Feature: Durable, High Performance
• Item Code: CP1E

• Model Number: MAXVU16
• Brand Name: WEST
• Application: Temperature and Process Controller
• Voltage: 100 to 240V 50/60Hz +/- 10% (mains powered version) 24V DC/AC +10%/-15%, AC 50/60Hz (low voltage ver
• Accuracy: Thermocouple +-0.25% of full range +-1 LSD (+-1 DegreeC for thermocouple CJC). PT100 +-0.25% of full range, +-1
• Type: Analog
• Size: 48*48 mm
• Color: BLACK ,GREEN
• Display Type: SEVEN SEGMENT MULTI COLOUR
• Item Code: MAXVU16
• Temperature Range: Thermocouple (J,K,C,R,S,T,B,L,N), RTD (3 Wire PT100), DC Linear (0 to 20mA, 4 to 20mA, 0 to 50mV, 10
• Controller Function Type: ON-off
• Input Sensor: Thermocouple (J,K,C,R,S,T,B,L,N), RTD (3 Wire PT100), DC Linear (0 to 20mA, 4 to 20mA, 0 to 50mV, 10
• Humidity: 0 to 55 DegreeC (-20 to 80 DegreeC storage), 20% to 95% RH non-condensing
• Control Output: Relay, SSR
•  :