Process Controllers Dealers in Bangalore

We are a well-known digital level controller manufacturer, exporter and supplier. Digital level controller, available with us, is fabricated with the highest level of perfection using high quality raw materials. The digital level controller is accurately dimensioned that ensures reliable and trouble free performance for lifetime. pump on & off is provided in two modes pump up mode: to fill the tank. : here the pump is on at low level & off at high level. The high & low levels are field selectable between ten steps.pump down mode: to empty the tank : here the pump is on at high level & off at low level. The high & low levels are field selectable between ten steps. detailsautomanual selector switch is provided for manual intervention.similarly, alarm is between low & high level which is field selectable between ten steps.digital level indicator also provides optional 4-20ma output.it is very useful for water sumps, overhead tanks, diesel storage tanks, diesel day oil tanks, oil tanks, chemical tanks, storage tanks, etc..

• Certification: CE Certified
• Weight: .200-400gm, 0-100gm, 100-200g, 400-800gm
• Color: Black, Dark Yellow, Grey, Orange, Red, Shiny-silver, Silver, White, Yellow
• Condition: New, Used
• Application: Household, Indoor, Industrial, Outdoor
• Display Type: Digital
• Theory: Bimetal Thermometer, Temperature Controller, Temperature Recorder, Temperature Sensor
• Frequency: 50Hz, 60Hz
• Power: 220V, 240V
• Driven Type: Battery, Electric
• Temperature Range: 0-100°C, 0-400C, 100-200°C, 200-400°C, 400-1000C, 400-800°C
• Feature: Auto Controller, Durable, Heat Resistance, High Performance, Low Battery Consumption, Stable Performance
• Current Type: AC, DC

• Power: 100 to 240 VAC
• Controller Type: On/Off Control, PID
• Brand: Omron
• Input Sensor: RTD, Thermocouple

CTK Controllers are closed-loop tension measurement and control instruments, designed to be used with  a hysteresis  brake or to act as a monitoring tension meter.The PLC control closed-loop type allows for interfacing with PLC and providing required current to the hystresis brake.Closed-loop type-this model measures and displays real-time running tension, while simultaneously comparing it to the preset tension values. Its built-in software compensates output current to the hysteresis break accordingly for precise, stable and consistent tension.Stand-Alone type - this model does not provide curent output. They are used to measure and display real time tension. It also alerts (Output alarm) the user when tension is detected to be out of preset range (the upper and lower tension limits can be preset.)

• Application: Industrial Use
• Color: Black
• Warranty: 1year
• Country of Origin: Made In UK
• Brand Name: Honeywell
• Model No: UDC1200
• Universal Inputs: 7 Thermocouple Types, RTDs and Linear Signals

Micro Processor Universal Digital Controller Model No : UDC1200 All O/P Contacts 2A Resistive 120-240V AC Power: 100-240VAC 50/60Hz 7.5VA Two 4- Digit Displays with 7 LED segments NEMA3/IP65 Moisture resistant, Dustproof front panel Universal Inputs: 7 Thermocouple Types, RTDs and Linear Signals Up to outputs: Relay, Solid State Relay (open Collector) or DC Linear Two soft alarms on outputs 2 and 3 plus Loop alarm RS485 ASCII Serial Communication Output Option Available

• Warranty: 1 year
• Material: Metal
• Condition: New
• Accuracy: 0.3% FS
• Case Size: 48 x 96 mm
• Accuracy: ±0.25%

We offer intelligent power factor controller, elmeasure has introduced yet another innovative product called ipfc. It helps in controlling the power factor thereby avoiding the penalty imposed by the electricity supply company. it also saves cost, increases internal electrical system capacity and improves voltage drop at the point of use. This leads to an efficient electrical system. Unlike in conventional controllers, elmeasure’s power factor controller senses three phase voltage and current. This ensures the perfect controlling of power factor in unbalanced load conditions. It’s rightly called intelligent as it increases the life of the correction capacitor, by controlling based on the capacitor bank switching history. It is not just a pf controller but also a true multifunction meter. It has v, a, hz, w, var, and wh parameters in addition to pf. Hence this product is truly power packed. It also has rs485 communication option. This product can be used in all incomers as a pf controller and also as a multifunction meter.

We offer intelligent power factor controller, elmeasure has introduced yet another innovative product called ipfc. It helps in controlling the power factor thereby avoiding the penalty imposed by the electricity supply company. it also saves cost, increases internal electrical system capacity and improves voltage drop at the point of use. This leads to an efficient electrical system. Unlike in conventional controllers, elmeasure’s power factor controller senses three phase voltage and current. This ensures the perfect controlling of power factor in unbalanced load conditions. It’s rightly called intelligent as it increases the life of the correction capacitor, by controlling based on the capacitor bank switching history. It is not just a pf controller but also a true multifunction meter. It has v, a, hz, w, var, and wh parameters in addition to pf. Hence this product is truly power packed. It also has rs485 communication option. This product can be used in all incomers as a pf controller and also as a multifunction meter.

We offer process controller, process monitor. Number of inputs : the number of inputs is the total number of signals sent to the controller. This number includes process variable signals such as temperature, pressure, level, speed, etc., and s tatus inputs such as on/off. number of control outputs : the number of control outputs is the total number of outputs used to control, compensate or correct the process. This number relay outputs as well as switches and rs232 serial pot .which activate or deactivate control devices. controller inputs : dc voltage input: controllers accept analog dc voltage inputs such as ±5 v, 0 -10 v. currentloop(transmitter) input: current loop (transmitter) inputs include analog inputs such as 0 - 20 ma and 4 - 20 ma. Or any other current-loop signal from a transmitter. resistive / potentiometer input : controllers accept analog inputs from a resistor or potentiometer which monitors the process variable(s). frequency input: a pulse or frequency input is used to measure and indicate a process variable for feedback to the controller. switch / relay input: controllers accept a discrete, on/off voltage signal from a sensor or switch which monitors the process. control signal output: switch / relay output / rs232: the output is a switch or relay that can be "on" or "off". general applications : control, monitor or record temperature, pressure, flow, production, totalizing and storing based on preset timing or real time clock through rs232 communication pot to save energy, time and man power to always increase the production capacity with lesser wastage in more ways.

• Brand Name: Oriental Motor co., ltd., Japan
• Place of Origin: Japan

We are offering ac motor speed controller. Essence is the authorized sales partner distributors in india for oriental motor co., ltd-japan make, motion control systems, we offer you a broad range of fully integrated product level with all ac motors & geared motors, variable speed control systems, stepper motors & driver systems, brushless dc (bldc) motors, actuators, cooling fans, centrifugal blowers, gear units and couplings with a full lifecycle perspective for the entire drive technology.

  We are amongst the prominent names of the industry that are involved in offering Process Controllers. These Process Controllers are available in various phases as per the requirements of the esteemed and valued customers. In addition, these Process Controllers are highly reliable and have robust body. Specifications: Digital PID controllers with auto-tune, fuzzy logic, multi program, multiple ramp/soak, cooling cycle, universal input, relay, SSR, (4-20) mA, TRIAC outputs are available. (Both Indian and imported)

RISC architecture based, intelligent state-of-the-art PNPF Prok dv's make DigitalMicrocontroller based Intelligent Automatic Power Factor Controller/Regulator/CorrectionRelay (APFCR) with on-line monitoring of line PF through industrial grade back-lit LCD Display.The Unit uses one of the tried and time tested intelligent algorithms to switch the capacitorbanks, in a most optimum combination in a shortest time for any dynamic load conditionswithout the need to select the complicated switching sequences by the user. Specification User entered parameter is stored in non-volatile memory (EEprom) CT Ratio & System Voltage user selectable through key board display Independent of Frequency Most Optimum combination obtained through advanced control programming RISC architecture dedicated Microcontroller based Target pf 0.80lag to 0.90 lead selectable through key board display Auto/Manual mode No complicated setting procedure User friendly interface

Microprocessor based Single set / Two set point Built in timers Digital calibration Software linearization Universal power supply input 48 sq or 96 sq mm Any range Any type of output

Extensive catalog of motorized positioning With 50 years of precision mechanical design, fabrication and motion control experience and expertise, Newport has developed an extensive catalog of motorized positioning and motion control products. Field proven motorized positioners are found across a broad spectrum of applications.

• Temperature Range: 0-50 Degree C
• Voltage: 230 V
• Accuracy: +/- 0.25% of FSD
• Resolution: 0.1 or 1 deg.C depending on the range
• Type: Digital
• Weight: 250 gms
• Brand: Surya Insts
• Model No.: TemCON
• DIN Size: 96 x 96 mm
• Controller Function Type: On-Off
• Humidity: 90 %RH max,non-condensing
• Effect of Ambient Temperature: +/- 0.005% of FSD / Deg C

We bring forth highly efficient Digital Temperature Controllers in the market. The Digital Temperature Controllers we offer are high on demand for proper and effective maintenance of temperature in different kinds of refrigeration equipment. We offer the Digital Temperature Controllers at the reasonable price. Technical specification : 220 VIndustries where this product is used : Medical line, hotels, Resorts, Super marketUses : Temperature Maintenance, Cut off and cut on

• Wetted Materials: 316L SS.
• Accuracy: : ±1% of FS including linearity, hysteresis, and repeatability (indicator and transmitter).
• Housing: Glass filled plastic
• Stability: < ±2% of FS per year.
• Pressure Limits: 1.5 x range.
• Temperature Limits: Ambient: 20 to 140°F (-6.6 to 60°C); Process: 0 to 176°F (-18 to 80°C).
• Compensated Temperature Limits: 32 to 122°F (0 to 50°C).
• Thermal Effect: ±0.05% of F.S./°F.
• Display: 4-digit backlit LCD (Digits: 0.60"H x 0.33"W).
• Power Requirements: 12 to 30 VDC/AC.
• Power Consumption: 2.5 watts.
• Electrical Connections: Removable terminal blocks with two 1/2" female NPT conduit connections.
• Enclosure Rating: Meets NEMA 4X (IP65).
• Warm Up Time: <10 seconds.
• Mounting Orientation: Any position.
• Weight: 1.18 lbs (535 g).

C2000 DSP, SMD, 320F240, PQFP132 Series: C2000 - F24x MMAC: 20 Core Frequency: 20MHz Core Supply Voltage: 5V Embedded Interface Type: SCI, SPI No. of I/O's: 28 Flash Memory Size: 32KB Supply Voltage Range: 4.5V to 5.5V Operating Temperature Range: -40°C to +125°C Digital IC Case Style: BQFP No. of Pins: 132 MSL: MSL 4 - 72 hours Base Number: 320 DSP Type: Fixed Point Frequency: 20MHz IC Generic Number: 320F240 Interface: SCI, SPI Interface Type: SCI, SPI Package / Case: PQFP RAM Memory Size: 1KB Supply Voltage Max: 5.5V Supply Voltage Min: 4.5V Termination Type: SMD

• Brand Name: Omega
• Type: Digital
• Size: 48*96 mm

• Accuracy: ± 1°C for microprocessor models or 1% for analog models.
• Resolution: 1°or 0.1°C
• Temperature: RTDs: - 200 to + 600°C , Thermocouple 0 - 1800°C
• Sensor: B, E, J, K, R, S, N, T, and RTDs
• Ambient Temp.: Should not exceed 70°C

A microprocessor instrument with the most advanced technology formeasuring, data storing and printouts of temperature, humidity,voltage and current. This can be used in Research Laboratories,Processing Industries, Power Plants, etc.

300S+ - The high-speed control system 300S+, powered by SPEED7 makes this system one of the fastest and most efficient, µC based systems worldwide, programmable with WinPLC7 and/or STEP7 from Siemens. The CPUs with SPEED7 technology convince our customers not only with their outstanding speed. Reaction and signal processing time can be increased if necessary with the ideal SPEEDbus from VIPA. The unique MemoryManagement (memory expansion concept) from VIPA enables the memory adaption by simple change of the MicroMemoryCard without replacing the CPU. Our worldwide recognized AdvancedKnowHow-Protect is available to protect your know how. The attractive range of integrated communication interfaces like Ethernet ensures you comfort and flexibility. Especially advantageous: The operation of our 300S+ CPUs is possible without  an additional memory card. If required the integrated work memory can be expanded individually up to 8MByte with the VIPA MCC – MemoryConfigurationCard – depending on the CPU type. The 300S+-CPU grows with your programming. All 300S+ CPUs are standardly equipped with Ethernet for PG/OP communication.Our 300S+ COMPACT CPUs with integrated SPEED7 technology and I/O periphery are especially suitable for cost sensitive applications. Our 300S+ is suitable for nearly every demanding applications with its high-speed performance, the scalable memory and the outstanding communication possibilities.

We are a leading Supplier of Sequence Controllers such as siemens sequence controller, siemens Burner Programmer, brahma sequence controllers, Oil Burner Controller, siemens Control Box, Linear Systems sequence controller, Linear Systems Burner Programmer, Honeywell Burner Controller and many more items. Siemens Burner Sequence controllers offer fully integrated control in a single module, saving valuable floor space over non-integrated systems, which is part of Burner Management Systems. There are various models available with different specifications for various applications of Oil Burner Controllers & Gas Burner Controllers. Each system is designed to meet or exceed the reliability and safety requirements of the industrial heating industry. The burner controls are used for the start-up, supervision and control of oil & gas burners in intermittent operation. Yellow burning flames are supervised with photo resistive Photocells, blue burning with blue-flame sensors, UV Flame Detectors. With the support of diligent personnel, we are offering finest quality Siemens Sequence Controllers. These products are well known among our clients for their effectiveness in regulating firing sequence in burners. Designed and fabricated at vendors end by use of skilled professionals, we have with us wide configurations of these controllers for serving vast clientele base. 

Digital Position Controller is manufactured by us and available at highly affordable prices. Digital Position Controller is high on demand in the market due to their guaranteed performance. We provide assorted range of Digital Position Controller to the clients as per their specifications. Additionally, we also give the timely delivery of Digital Position Controller in the well stipulated time frame. Size Available : 96 × 96 × 100 mm Range : 0-100 % Specifications : Control I/P : 4-20 mA, 0-1VDC, 0-10VDCFeed back I/P : Resistance Feed back, 4-20 mA , 0-1VDC, 0-10VDCControl O/P : Supply to the motor for forward and reverseMotion or potential free contactsKeys Provided : Auto / Man selection, Open and CloseAuto mode : Controls valve / Damper operation according to the control I/P givenManual mode : Valve / Damper can be operated using front panel Open and Close keys.Feed back out put : 4-20 mA, 0-1VDC or 0-10VDC for 0 to 100% travel.Supply voltage : 24 VAC, 110 VAC, and 230 VAC as required.Temperature : 0 to +50º CHumidity : 0 to 90% RH (Non -Condensing).

• Features: High performance solid state instruments , Accurate results , Long life.

 Input (RTD, Volts, mA)• Fail-safe Design protecting the process in case of system malfunctioning• Bright Red seven segment LED Display• Display brightness control• Status Indication LEDs• Relay Output (optional)• Retransmission output (optional)• RS485 Modbus Communication (optional)• Transmitter Power Supply• Relay/ retransmission output mapping with respect to input

• Features: Small, compact controller,470 mm wide, 200 mm high, 420 mm deep

Our newest controller is small, powerful and open. Designed for packaging, small parts handling and assembly applications, it has the performance required for high speed, discrete operations. It also has open software architecture to enable OEMs, machine builders and system integrators to develop their own customized software solutions. Designed for Motoman® robots with payloads of 20 kg and under.