RANVAC Technologies Peenya, Bangalore, Karnataka

All CF flanges are manufactured from specially selected, high quality stainless steel - 304L (1.4306) or the higher specification 316LN (1.4429). These materials being the accepted standards throughout the UHV vacuum industry. Both stainless steels are low carbon varieties designed to avoid inter-granular corrosion after welding. Cleaning and Packaging: Products with weld joints are 100 percent helium leak tested to assure leak free. To ensure the cleanliness of RANVAC products ready for onsite use, all parts are ultrasonically cleaned with de-ionized water, and packaged. Each bag is affixed with a label identifying the component’s part number. Customization: Other flange materials on request. Customization of design and variations from standard sizes available on request.  

RANVAC ISO flange are manufactured according to ISO specifications with full compatibility to other manufacturers’ standard. There are two types of flange assemblies claw clamp type and bolt flange type; both use an O-ring hold in place by a centering ring to achieve vacuum seal up to 1x10-9mbar. The bolt type flanges are assembled by using a set of bolts to fix the position of the flanges. The claw clamp flanges use double claw clamps to hold two flanges together. The use of the claw clamps means that mating flanges can be connected in any orientation. Single clamp also can be used for certain applications.

All CF flanges are manufactured from specially selected, high quality stainless steel - 304L (1.4306) or the higher specification 316LN (1.4429). These materials being the accepted standards throughout the UHV vacuum industry. Both stainless steels are low carbon varieties designed to avoid inter-granular corrosion after welding. Cleaning and Packaging: Products with weld joints are 100 percent helium leak tested to assure leak free. To ensure the cleanliness of RANVAC products ready for onsite use, all parts are ultrasonically cleaned with de-ionized water, and packaged. Each bag is affixed with a label identifying the component’s part number. Customization: Other flange materials on request. Customization of design and variations from standard sizes available on request.  

RANVAC ISO flange are manufactured according to ISO specifications with full compatibility to other manufacturers’ standard. There are two types of flange assemblies claw clamp type and bolt flange type; both use an O-ring hold in place by a centering ring to achieve vacuum seal up to 1x10-9mbar. The bolt type flanges are assembled by using a set of bolts to fix the position of the flanges. The claw clamp flanges use double claw clamps to hold two flanges together. The use of the claw clamps means that mating flanges can be connected in any orientation. Single clamp also can be used for certain applications.

All CF flanges are manufactured from specially selected, high quality stainless steel - 304L (1.4306) or the higher specification 316LN (1.4429). These materials being the accepted standards throughout the UHV vacuum industry. Both stainless steels are low carbon varieties designed to avoid inter-granular corrosion after welding. Cleaning and Packaging: Products with weld joints are 100 percent helium leak tested to assure leak free. To ensure the cleanliness of RANVAC products ready for onsite use, all parts are ultrasonically cleaned with de-ionized water, and packaged. Each bag is affixed with a label identifying the component’s part number. Customization: Other flange materials on request. Customization of design and variations from standard sizes available on request.  

RANVAC flanges are designed in accordance with International Standards Organization specifications which are compatible with other manufacturers’ KF-ISO flange design. Standard materials are in stainless steel 304L, 316L and Aluminum KF flanges allow easy and quick disassembly for repeatable uses. Flange connections are available for tube size from KF10 – KF50. KF flanges utilize an aluminum clamp with a single wing nut clamp allowing frequent disassembly without tools. The degree taper surface of flanges allows uniform pressure for compressing an O-ring held in place by a centering ring. The vacuum seal can be applied up to 1 x 10-9 mbar, depending on gasket material, and baked to 200°C.

RANVAC flanges are designed in accordance with International Standards Organization specifications which are compatible with other manufacturers’ KF-ISO flange design. Standard materials are in stainless steel 304L, 316L and Aluminum KF flanges allow easy and quick disassembly for repeatable uses. Flange connections are available for tube size from KF10 – KF50. KF flanges utilize an aluminum clamp with a single wing nut clamp allowing frequent disassembly without tools. The degree taper surface of flanges allows uniform pressure for compressing an O-ring held in place by a centering ring. The vacuum seal can be applied up to 1 x 10-9 mbar, depending on gasket material, and baked to 200°C.

RANVAC flanges are designed in accordance with International Standards Organization specifications which are compatible with other manufacturers’ KF-ISO flange design. Standard materials are in stainless steel 304L, 316L and Aluminum KF flanges allow easy and quick disassembly for repeatable uses. Flange connections are available for tube size from KF10 – KF50. KF flanges utilize an aluminum clamp with a single wing nut clamp allowing frequent disassembly without tools. The degree taper surface of flanges allows uniform pressure for compressing an O-ring held in place by a centering ring. The vacuum seal can be applied up to 1 x 10-9 mbar, depending on gasket material, and baked to 200°C.

RANVAC flanges are designed in accordance with International Standards Organization specifications which are compatible with other manufacturers’ KF-ISO flange design. Standard materials are in stainless steel 304L, 316L and Aluminum KF flanges allow easy and quick disassembly for repeatable uses. Flange connections are available for tube size from KF10 – KF50. KF flanges utilize an aluminum clamp with a single wing nut clamp allowing frequent disassembly without tools. The degree taper surface of flanges allows uniform pressure for compressing an O-ring held in place by a centering ring. The vacuum seal can be applied up to 1 x 10-9 mbar, depending on gasket material, and baked to 200°C. However, sustained baking above 200°C may result in deterioration of O-rings. RANVAC provides a broad range of KF adaptors for connecting to different types of flanges. Clamping ring: Aluminum Screw & nut : SS304

RANVAC flanges are designed in accordance with International Standards Organization specifications which are compatible with other manufacturers’ KF-ISO flange design. Standard materials are in stainless steel 304L, 316L and Aluminum KF flanges allow easy and quick disassembly for repeatable uses. Flange connections are available for tube size from KF10 – KF50. KF flanges utilize an aluminum clamp with a single wing nut clamp allowing frequent disassembly without tools. The degree taper surface of flanges allows uniform pressure for compressing an O-ring held in place by a centering ring. The vacuum seal can be applied up to 1 x 10-9 mbar, depending on gasket material, and baked to 200°C.

RANVAC flanges are designed in accordance with International Standards Organization specifications which are compatible with other manufacturers’ KF-ISO flange design. Standard materials are in stainless steel 304L, 316L and Aluminum KF flanges allow easy and quick disassembly for repeatable uses. Flange connections are available for tube size from KF10 – KF50. KF flanges utilize an aluminum clamp with a single wing nut clamp allowing frequent disassembly without tools. The degree taper surface of flanges allows uniform pressure for compressing an O-ring held in place by a centering ring. The vacuum seal can be applied up to 1 x 10-9 mbar, depending on gasket material, and baked to 200°C.

All CF flanges are manufactured from specially selected, high quality stainless steel - 304L (1.4306) or the higher specification 316LN (1.4429). These materials being the accepted standards throughout the UHV vacuum industry. Both stainless steels are low carbon varieties designed to avoid inter-granular corrosion after welding. Cleaning and Packaging: Products with weld joints are 100 percent helium leak tested to assure leak free. To ensure the cleanliness of RANVAC products ready for onsite use, all parts are ultrasonically cleaned with de-ionized water, and packaged. Each bag is affixed with a label identifying the component’s part number. Customization: Other flange materials on request. Customization of design and variations from standard sizes available on request.  

All CF flanges are manufactured from specially selected, high quality stainless steel - 304L (1.4306) or the higher specification 316LN (1.4429). These materials being the accepted standards throughout the UHV vacuum industry. Both stainless steels are low carbon varieties designed to avoid inter-granular corrosion after welding. Cleaning and Packaging: Products with weld joints are 100 percent helium leak tested to assure leak free. To ensure the cleanliness of RANVAC products ready for onsite use, all parts are ultrasonically cleaned with de-ionized water, and packaged. Each bag is affixed with a label identifying the component’s part number. Customization: Other flange materials on request. Customization of design and variations from standard sizes available on request.  

RANVAC ISO flange are manufactured according to ISO specifications with full compatibility to other manufacturers’ standard. There are two types of flange assemblies claw clamp type and bolt flange type; both use an O-ring hold in place by a centering ring to achieve vacuum seal up to 1x10-9mbar. The bolt type flanges are assembled by using a set of bolts to fix the position of the flanges. The claw clamp flanges use double claw clamps to hold two flanges together. The use of the claw clamps means that mating flanges can be connected in any orientation. Single clamp also can be used for certain applications.

All CF flanges are manufactured from specially selected, high quality stainless steel - 304L (1.4306) or the higher specification 316LN (1.4429). These materials being the accepted standards throughout the UHV vacuum industry. Both stainless steels are low carbon varieties designed to avoid inter-granular corrosion after welding. Cleaning and Packaging: Products with weld joints are 100 percent helium leak tested to assure leak free. To ensure the cleanliness of RANVAC products ready for onsite use, all parts are ultrasonically cleaned with de-ionized water, and packaged. Each bag is affixed with a label identifying the component’s part number. Customization: Other flange materials on request. Customization of design and variations from standard sizes available on request.  

RANVAC ISO flange are manufactured according to ISO specifications with full compatibility to other manufacturers’ standard. There are two types of flange assemblies claw clamp type and bolt flange type; both use an O-ring hold in place by a centering ring to achieve vacuum seal up to 1x10-9mbar. The bolt type flanges are assembled by using a set of bolts to fix the position of the flanges. The claw clamp flanges use double claw clamps to hold two flanges together. The use of the claw clamps means that mating flanges can be connected in any orientation. Single clamp also can be used for certain applications.

All CF flanges are manufactured from specially selected, high quality stainless steel - 304L (1.4306) or the higher specification 316LN (1.4429). These materials being the accepted standards throughout the UHV vacuum industry. Both stainless steels are low carbon varieties designed to avoid inter-granular corrosion after welding. Cleaning and Packaging: Products with weld joints are 100 percent helium leak tested to assure leak free. To ensure the cleanliness of RANVAC products ready for onsite use, all parts are ultrasonically cleaned with de-ionized water, and packaged. Each bag is affixed with a label identifying the component’s part number. Customization: Other flange materials on request. Customization of design and variations from standard sizes available on request.  

All CF flanges are manufactured from specially selected, high quality stainless steel - 304L (1.4306) or the higher specification 316LN (1.4429). These materials being the accepted standards throughout the UHV vacuum industry. Both stainless steels are low carbon varieties designed to avoid inter-granular corrosion after welding. Cleaning and Packaging: Products with weld joints are 100 percent helium leak tested to assure leak free. To ensure the cleanliness of RANVAC products ready for onsite use, all parts are ultrasonically cleaned with de-ionized water, and packaged. Each bag is affixed with a label identifying the component’s part number. Customization: Other flange materials on request. Customization of design and variations from standard sizes available on request.  

An OFHC copper gasket - is held between the knife edges of a pair of CF flanges. On tightening the retaining bolts, the knife edges cut into the gasket and force the copper both axially as well as radially outwards to the flange. The material is thus enclosed and cannot flow, even at high bakeout temperatures. This sealing method has a maximum bakeout temperature of 450ºC and is suitable for vacuum applications to 10-12 mbar.

All CF flanges are manufactured from specially selected, high quality stainless steel - 304L (1.4306) or the higher specification 316LN (1.4429). These materials being the accepted standards throughout the UHV vacuum industry. Both stainless steels are low carbon varieties designed to avoid inter-granular corrosion after welding. Cleaning and Packaging: Products with weld joints are 100 percent helium leak tested to assure leak free. To ensure the cleanliness of RANVAC products ready for onsite use, all parts are ultrasonically cleaned with de-ionized water, and packaged. Each bag is affixed with a label identifying the component’s part number. Customization: Other flange materials on request. Customization of design and variations from standard sizes available on request. 

All CF flanges are manufactured from specially selected, high quality stainless steel - 304L (1.4306) or the higher specification 316LN (1.4429). These materials being the accepted standards throughout the UHV vacuum industry. Both stainless steels are low carbon varieties designed to avoid inter-granular corrosion after welding. Cleaning and Packaging: Products with weld joints are 100 percent helium leak tested to assure leak free. To ensure the cleanliness of RANVAC products ready for onsite use, all parts are ultrasonically cleaned with de-ionized water, and packaged. Each bag is affixed with a label identifying the component’s part number. Customization: Other flange materials on request. Customization of design and variations from standard sizes available on request.  

RANVAC ISO flange are manufactured according to ISO specifications with full compatibility to other manufacturers’ standard. There are two types of flange assemblies claw clamp type and bolt flange type; both use an O-ring hold in place by a centering ring to achieve vacuum seal up to 1x10-9mbar. The bolt type flanges are assembled by using a set of bolts to fix the position of the flanges. The claw clamp flanges use double claw clamps to hold two flanges together. The use of the claw clamps means that mating flanges can be connected in any orientation. Single clamp also can be used for certain applications.

RANVAC ISO flange are manufactured according to ISO specifications with full compatibility to other manufacturers’ standard. There are two types of flange assemblies claw clamp type and bolt flange type; both use an O-ring hold in place by a centering ring to achieve vacuum seal up to 1x10-9mbar. The bolt type flanges are assembled by using a set of bolts to fix the position of the flanges. The claw clamp flanges use double claw clamps to hold two flanges together. The use of the claw clamps means that mating flanges can be connected in any orientation. Single clamp also can be used for certain applications.

RANVAC ISO flange are manufactured according to ISO specifications with full compatibility to other manufacturers’ standard. There are two types of flange assemblies claw clamp type and bolt flange type; both use an O-ring hold in place by a centering ring to achieve vacuum seal up to 1x10-9mbar. The bolt type flanges are assembled by using a set of bolts to fix the position of the flanges. The claw clamp flanges use double claw clamps to hold two flanges together. The use of the claw clamps means that mating flanges can be connected in any orientation. Single clamp also can be used for certain applications.