Renewable Energy Products Dealers in Hebbal Kempapura, Bangalore

• Type Of Collector: MGR
• Tank Material: Stainless Steel
• Installation Type: Freestanding
• Usage/Application: Industrial

• Automatic Grade: Semi Automatic
• Power Source: Solar Power
• Blade Material: Easy To Oprate, Low Voltage Indication
• Input Voltage: Solar input in DC and AC 230v
• Power range: 800va, 1kva, 2kva
• Contains: Solar Panel, Battery and inverter
• Used for: Homes, small offices and shops

Our Solar Hybrid UPS systems use the latest technology in Backup power where the batteries are chargeable from Solar and Grid power. Our Solar Hybrid UPS systems fully optimize on available solar power to reduce your electricity bills. The come in standard configurations and can be customized as per your requirement. They come complete with Solar Panel, Battery and Inverter.   Does not include : Frame to install solar panel and wire as these are specific to site conditions These can be supplied separately at additional cost

The FLAT PLATE collector absorbs the solar energy and converts it into heat energy. The cold water flowing through the riser pipes gets heated and moves into insulated storage tank through header pipe, due to low density of hot water it occupies the upper portion of the insulated storage tank and the cycle continues as long as the sun rays fall on the collector. By the end of the day the entire tank is with hot water. As the storage tank is insulated which retains heat overnight. In this principle water can reach temperature up to 600c – 850c.   Specifications:   COLLECTOR BOX Collector Size : 2030 x 1030 x 100 mm Collector Box : Extruded Aluminium, make – Indal / Jindal Grade – HE9T/HE9WP Finish : powder Coating Glass Retaining Angle : Extruded Aluminium as above Back Sheet : 22SWG, Aluminium, Revited and sealed with silicone sealed/ Galvanized sheet as per IS Glass : 4mm, toughened, low Iron content with 85% minimum transmitivity Glass/beeding/Sealing : EPDM with 35% rubber content along with the top Aluminium retainer angle, using SS self tapping Screws Grommets : EPDM with Inside / outside locking collar Ends Connections : 4mm thick brass flages with EPDM gaskets Insulations : 48kg/ cu.m density rockwool/ puff Bottom – 50mm and Sides – 25mm Reflective Foll : Aluminium – 100 microns for sides, 50 microns for bottom Frame Corners : Sealed from inside with Silicone Sealant and Provision of Corner Clips for better aesthetics and prevantion of moisture entry  ABSORBER Coating: Selective Bonding between Fins and Riser: Block Chrome – NALSUN Absorptivity > 0.95 Emmissivity : < 0.15 Ultrasonic Welding / Lead and Tin Soldering Bonding btw Header and Riser : Metallurgical bonding using 14% Silver Brazing rod Absorber Area : 2.07 sq.m Fins : 99.9% + -0.01 Copper – 120 mm wide, 36 SWG Number of Fins : 09 (Nine) Test Pressure : 5.0 kg/sq.cm Header : 99.9% + -0.01 Copper -1” x22 SWG Riser : 99.9% + -0.01 Copper-1/2 x22 SWG System Temperature : 60o C - 85oC  STORAGE TANK Inner Storage Tank : SS 304 Grade with TIG Welding Inter Connecting Pipes : SS 304 Grade End covers : Powder Coated pressed Aluminium dishes Insulation : 100 mm Rinsine bonded Rockwool Tank Outer Cladding : SS mirror finishing/ Powder Coated Aluminium with optional Colours   Features:   ISI marked 1.5 KW back-up heater with Thermostat(optional) All fasteners are made of SUS 304 Food grade for rust free. No scaling formation will be occurred by using salt and hard water in ETC systems. Compressed PUF, insulated storage tank to retain the hot water for more than 48 hours. Auxillary tank is fitted instead of air vent, withstands high cold water pressure also minimize mixing of hot water and cold Strong, polyester powder coated, rust free metal frame and laminated outer tank. Air tight silicon 0 Rings avoid hot water leakage due to high temperature. High quality, tested and tough/ borosilicate glass tubes. Easy Maintenance & round the clock service facility with Dealer network and service centers all over India (Goa, Karnataka, Andra Pradesh, Tamil Nadu, Maharashtra - Kolapur, Jaipur).

A Solar Water Heater is a device which provides hot water for bathing, washing, cleaning, etc. using solar energy. It is generally installed at the terrace or where sunlight is available and heats water during day time which is stored in an insulated storage tank for use when required in the mornings. Solar Water Heating Systems saves money for the users. A 100 liter per day capacity system suitable for 3 - 4 people can save upto 1500 units of electricity in a year, depending on hot water used. It can also save around 140 liters of diesel in an establishment using oil fired boiler besides reducing green house gas emissions in the atmosphere. Higher capacity systems will save higher amount of electricity/fuel oil besides reducing higher amount of GHG emissions.

• Energy Transform Efficiency: 20%: Luminous Efficiency (lm/w): 100
• Life Time (Hour): 50000: Energy saving efficiency long life span low voltage and more safety steady and shock resistant small size and light weight start without delay adjustable multicolor environment care.

We are offering solar led office lighting systems. Led office lighting systems are a cost-effective way to illuminate office spaces. Led lights lights illuminate far more than conventional lights, are energy efficient, last longer and are maintenance free.

Paper windmill

Wind Turbines, Air Ventilator

Solar System, Solar Street Light, Solar Water Heater, Solar Water Pump

Solar Lighting System, portable solar torch