Safety Locks Dealers in Peenya, Bangalore

• Features: Elegant, low-profile Safety Quarter-turn, vibration-proof also at high sealing pressure through an integrated latch ,The key is captive in open position according to DIN 43668 .

HeliCoil Screw Locking Insert as standard is available in Stainless Steel AISI-304/ DTD 734 . Metric series ranges from M2 to M39 & unified series from UNC / UNF 1-64 to 1-1/2 inch. HeliCoil Screw Lock Insert is also available in strip feed or reel mounted form . HeliCoil Locking Insert provides an exclusive, resilient internal locking thread that grips the bolt and prevents it from loosening under vibration or impact. One or more coils of the HeliCoil insert, having a series of straight segments/ chords, achieve locking action. HeliCoil Locking Insert permits repeated assembly and disassembly and will not relax their grip on the screw even in tough metals such as cast iron, alloy steel, titanium, etc. HeliCoil Locking Insert positively secures threaded members against loosening caused by vibration and shock. HeliCoil Locking Insert has a high reusable factor permitting frequent removal and reassembly of bolt without appreciable loss of torque. It has positive self-locking torque, complying with NASM8846, MA1565 and MIL-N-25027. It eliminates the usage of lock wiring, lock nuts, lock washers, chemical compounds, plastic pellets/ patches and other locking mechanisms. The HeliCoil Locking Inserts are subjected to extensive tests in tension, torque, shear, vibration and fatigue, conducted by the American & European companies. Its applications include sectors like Aviation & Aerospace, Electronics, Industrial, Automotive and Military. 

• Material: Die-cast Zinc Alloy
• Finish: Chrome
• Key Rotation: 90 to 180 Degree

Backed by huge industry knowledge, we are presenting a supreme quality range of Door Interlocking System to our highly valued consumers. Airlocks with interlocked doors are to preclude ingress of particulate matter and microorganism contamination from a lesser controlled areas. Interlocking doors will facilitate better control of air balance throughout the aseptic processing facility. The Interlock system prevents the simultaneous opening of the doors in the airlock / change room.  Features:   Easy to install Easy to operate Fine finish

  Electromechanical locks have a wide range of usage where there are demands of swift locking. and Standard to advanced electro mechanical lock options are available on both light and heavy protective doors. Locks are controlled by impulse generating equipment like access control, keypad. The locks have sensors that monitor outputs like position of bolt, handle down, request to exit, & door status. EMLocks supplied are best in business and provide security applications to satisfy a wide range of security needs.

Used in applications which require a strong, permanent metal thread in soft materials such as aluminum. Typically used in applications such as; aluminium gear box, aluminum frame, armunition (tank), door

WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). On press fitted parts and larger cylindrical assemblies a thin and uniform layer should be applied on both surfaces. In the case of threaded blind holes fill sufficient quantity in the bore hole. On screws and bolts, apply WEICONLOCK around the thread. Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.   Pretreatment of the surface In general, WEICONLOCK does not require special pretreatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on cleaned, degreased parts (use WEICON Surf Product Code:AN 302-70 Brand Name: WEICON Germany    Technical data Application Locking of threads and stud bolts Features medium viscosity, high strength Colour green For threaded joints up to M 20 R ¾” Viscosity at +25°C Brookfield 500 nt mPa·s Gap filling capacity max. 0,15 mm Breakaway strength (Thread) 28 – 35 Nm Prevailing strength (Thread) 50 – 65 Nm Shear strength (DIN 54452) 15 – 20 N/mm² Handling strength at room temperature 10 – 20 min. Final strength at room temperature 3 – 6 h Temperature resistance -60 bis +150 °C

• Feature: Fine quality, Perfect finish ,Long lasting

Lock, Industrial Keys, Hinges

RFID Hotel Locks, Energy Saving Switch, DND ELECTRONICS DOOR PLATES

Aluminum Door Lock, Aluminum Door Hinge, Aluminium Door Knob, Office Rack

Door lock is an electro-mechanical device which is designed to perform locking and unlocking operations on a door which it receives the information from the authorized device using a wireless protocol to execute the further process. It monitors the access and sends alerts for the different situations it monitors and some other critical events it faces.

Locking Pliers Set, Claw Hammers, Electrical Tester, Hand Saw, Power Tools

Door Lock Parts, Naphthalene Balls

Lever Handle Lock, Conceled Flush Bolt, Metal Fire Doors, Hospital Doors

Locking Systems, Vision Systems, Handles, Latches and Hinges

• Material: Metal
• Thickness: 1.5-2mm
• Application: Industrial
• Color: Silver
• Feature: Best Quality
• Surface: Polished
• Country of Origin: India
• Size: 20/25/30 MM

Saf-t-lock Pad Locks, Spiral And Clock Springs, Bending Springs

Door Locks, Baskets, Door Fitting, Door Glass, Door Handle, Plywood

Screw Lock Thread Inserts, ACME Taps, Extraction Tools

Bank Vaults, Board Camera

Door Locks, Aluminium Screws, Door Fitting, Hardware Product, PVC Doors