Sensors Dealers in Btm Layout, Bangalore

Measuring range h: 0.04 up to 1.3 m with integrated ultrasonic level sensor, expandable with external pressure sensor up to 0-3.5 m Data storage: 2 MB (Q-Eye MII, Q-Eye MDS-5), 2 GB (Q-Eye PSC) Data transmission: integrated GSM/GPRS modem as option for Q-Eye MII external GSM/GPRS modem as option for Q-Eye MDS-5 Q-Eye MII (mobile measurement) The strength of Q-Eye MII lies in mobile applications. The long lifetime of approx. 90 days with a measuring interval of 5 minutes, as well as the small and robust housing make it perfect for temporary measurements. In addition to water level and flow, the quality of signal, battery voltage and calculated velocity are also stored in the data logger. An impulse output provides the necessary signal to a sampler. With the optional connectable pressure sensor, the water level can be collected redundantly. The measuring range can be upgraded up to 3.5m. All connection cables are provided with water tight plugs, which makes mounting or changing of battery in field easy. The display, which is activated with a magnetic switch, shows the active measuring values and informs about the status of the measuring device. With laptop and Software Q-Vision Setup, all parameters are entered and the measured values are read out. Q-Eye MDS5 (stationary measurement). Our discharg measuring system type Q-Eye MDS5 is composed of two individual hardware components the ultrasonic Doppler sensor with measuring signal converter "Q-Eye", as well as the reliable SEBA data logger type "MDS-5" for continuous data storage of for example flow, level and battery voltage. If requested, further digital or analogue sensors (e.g. multi- parameter probe MPS-D3) can be connected. Flow measure- ments in small streams or canals up to approximately 4-5 m width are the ideal application for our Q-Eye MDS5. Due to its very low energy consumption this instrument does not need an external power supply! With a measuring interval of 15 minutes in combination with a 100 Ah battery, a durability of 3 months can be achieved without problems! Good news also for users who are already working with SEBA MDS data loggers: existing operating and evaluation software WEbdien, DEMASvis, DEMASdb or the SEBA HDA can be used continuously without further investments.

• Frequency: 50Hz/60Hz
• Voltage: 12 Volt
• Material: Stainless Steel
• Packaging Type: Box
• Power Source: Electric
• Phase: Single Phase

• Type: Pressure Sensors
• Application: Automobile Use, Industrial Use
• Color: Black, White
• Condition: New, Used
• Power: 15w, 20w, 25w
• Power Supply: 24 VDC

Current sensor for PCB mounting, the smallest and lightest in the industry Features * Smallest and lightest in the industry due to use of a high-precision magnetic element * High-precision detection achieved with low resistance and low heat generation * Highly resistant to disturbance, facilitating equipment design

• Connector: 3 Blade
• Type: Pressure Senor
• Power Source: Electric
• Available Material: Plastic
• Features: Hassle free operation, Easy installation, Efficient working

• Features: With built-in measuring insert, As single or double RTD temperature probe, Form B or BUZ terminal head, Available with transmitter
• Applications: Mechanical engineering, Industrial boiler plants, Transformer engineering, Textile machines
• temperatures: -50 to +400 °C

• Type: Portable
• Certification: CE Certified
• Driven Type: Electric
• Feature: Easy To Operate, Stable Performance
• Warranty: 1 Year
• Accuracy: 100%
• Theory: Temperature Sensor

• Type: Flexiforce Sensor
• Length: 25.4mm
• Width: 14mm
• Thickness: 0.203 mm
• Packaging Type: Box

• Brand Name: HoneyWell
• Voltage: 8-15Vdc
• Usage/Application: Clinical/ Hospital
• Model Name/Number: AWM5104VN
• Flow Range: 0-20SLPM
• Signal Conditioning: Amplified

Our company is engaged in manufacturing and supplying Temperature Scanner that is very effective and durable. The Temperature Scanner provided by us is renowned for its accuracy and reliability. We make sure that the specifications of the Temperature Scanner provided by us is equipped with the best possible features and manufactured keeping in mind the needs of our clients. The Temperature Scanner provided by us meets varied uses in the industrial sectors. Accessories (For Models with Independent Alarms) : Weather proof Enclosure for DIN Rail Mounted Alarm Output Card with 16 32 Open Collector outputsExternal Relay Box For Scanners with Independent Alarms-weatherproof enclosure housing DIN rail mounted Open collector output card, Power supply & RelayModules. Power Supply : 230 V AC, 50 HzNote : Item No. 1 not requiredRelay Box with 8 Nos. Alarm Relay 3 Amps250 V ACRelay Box with 16 Nos. Alarm Relay 3 Amps250 V ACRelay Box with 32 Nos. Alarm Relay 3 Amps250 V AC (for 16 Channel Scanner only) Features : Intelligent multi channel data acquisition display8 16 Channels - Universal Input (TC RTD mA mV V Ω)Every channel is independently programmable for input, range & alarmsInput channels are isolated for all inputs except RTD ΩCommon Independent Low & High Alarm relays for each channel24VDC Power supply for 2 wire transmitters - on 3 channelsHigh accuracy (14 bit resolution), μP basedSelf Diagnosis function - Input fail safe operationCommunication (RS485 RS232) MODBUS Printer portEMI ESD protection; CE approved SpecificationsInputThermocoupleS, B, T, R, K, E, J, NRTDPt100, Cu50, Cu100Voltage(-)20 - 20mV DC, (-)100 -100mV DC, 0 -100mV DC, 0 - 500mV0-1VDC, 0-5V DC, 1-5V DC, 0-10V DCCurrent Signals0-10mA, 4-20mA, 0-20mASquare root extraction0-5V DC, 1-5V DC, 0-10mA, 4-20mAResistance Signals0-100 Ω, 30-350 ΩMeasuring Accuracy± 0.2% FS ±1 Digit, typicalResolutionTC: 1oC (0.1oC Upto 999.9oC) RTD: 0.1oCDisplayProcess Value TypeSize4 digit, 7 segment LED, Red14 mm (0.56”) in 96 x 96 mm; 9 mm (0.35”) in 48 x 96 or 96 x 48Channel No.TypeSize4 digit, 7 segment LED, Green 9 mm (0.35")Channel Display TimeProgrammable from 1 to 100 secondsOutput (Optional)Linear Retransmission output4-20mA (14bit Resolution), isolated, 0-20mA (option)Accuracy± 0.3% FS, typicalAlarm outputNone Common One Two (High Low) Alarm Relays (built-in) Independent High & Low Alarm Relays per channel (in externalwall mount enclosure);Option: SSR drive Voltage in place of RelayAlarm Relay RatingCommon alarm : 1 Amp 250 VAC, resistive load; 310 A (Optional)Independent alarm : 3 Amp 250 VAC, resistive loadTransmitter Power Supply24V DC 30 mA, isolated for 2 wire type; upto 3 nos. (Optional)Communication (Optional)RS485 - ASCII Protocol MODBUS Serial Printer PortSizeBezel (W x H), mm96 x 96 or 48 x 96 or 96 x 48Panel cut out (W x H), mm90.5 x90.5, 44.5 x 90.5 & 90.5 x 44.5 Download

Conventional Optical Smoke Sensor, Standalone Smart Sensor

• Temperature: -40
• Operating Voltage: 220VAC±10%
• Color: White,Gray

Pyranometers are frequently used in meteorology, climatology, solar energy studies and building physics. They can be seen in many meteorological stations (typically installed horizontally) and next to solar panels (typically mounted with the sensor surface in the plane of the panel).Ability to add UV sensor.Electronic components are housed in a weather - resistant shelter

• Color: Grey
• Features: Precisely designed, Easy installation ,Efficient performance
• Application: Industrial
• Brand Name: LEM
• Voltage: 12v-15v
• deals in: New only

Only high quality raw material is used for preparing the offered lot and we make sure that it is sourced from the trusted places and that too after complete quality confirmation. To ensure quality of the products, we conduct diverse quality tests at all stages and thus our products are quality assured.

fuel level sensors, Aircraft Windscreen Sensors

• Material: PBT
• Output: Pre-Wired
• SVHC: Bis (2-Ethylhexyl)Phthalate (DEHP) (15-Dec-2010)
• External Depth: 64.3mm
• External Length / Height: 31.5mm
• External Width: 10mm
• IP/NEMA Rating: IP50
• Lead Length: 2m
• Operating Temperature Max: 55°C
• Operating Temperature Min: -25°C
• Output Current: 50mA
• Output Type: NPN
• Output Voltage: 1 V max.
• Sensing Distance Max: 200mm
• Sensing Distance Min: 0.3mm
• Sensing Range Max: 200mm
• Sensor Input: Optical
• Supply Current: 35mA
• Supply Voltage DC Max: 24VDC
• Supply Voltage DC Min: 12VDC.

We make available, Reverse Parking Sensors, which are equipped with a digital LED display, 4 rear ultrasonic sensors and "Bi Bi" voice alerting. These sensors are acknowledged for turning on automatically when the cars begin to reverse.

We are a well-known Manufacturer, Exporter & Supplier of AC Current Sensor. The Hall Effect is an ideal sensing technology. The Hall element is constructed from a thin sheet of conductive material with output connections perpendicular to the direction of current flow. When subjected to a magnetic field, it responds with an output voltage proportional to the magnetic field strength. The voltage output is very small (µV) and requires additional electronics to achieve useful voltage levels. When the Hall element is combined with the associated electronics, it forms a Hall Effect sensor. The heart of every MICRO SWITCH Hall effect device is the integrated circuit chip that contains the Hall element and the signal conditioning electronics. The XYZ consists of a precise, low-temperature drift linear hall Sensor IC with temperature compensation circuit and a current transformer with 0.24 Ohm typical internal conductor resistance. This extremely low resistance can effectively reduce power loss, operating temperature and increase the reliability greatly. Applied current flowing through this conduction path generates a magnetic field which I s sensed by the integrated Hall IC and converted into a proportional voltage. Working Principle : Theory of the Hall Effect : When a current-carrying conductor is placed into a magnetic field, a voltage will be generated perpendicular to both the current and the field. This principle is known as the Hall Effect. Figure 2-1 illustrates the basic principle of the Hall Effect. It shows a thin sheet of semiconducting material (Hall element) through which a current is passed. The output connections are Perpendicular to the direction of current. When no magnetic field is present (Figure 2-1), current distribution is uniform and no potential difference is seen across the output. When a perpendicular magnetic field is present, as shown in Figure 2-2, a Lorentz force is exerted on the current. This force disturbs the current distribution, resulting in a potential difference (voltage) across the output. This voltage is the Hall voltage (VH). The interaction of the magnetic field and the current is shown in equation form as equation 2.1. Advantages : Very economical Can measure both DC and AC current Current sensing is easy Applications : Current sensing Power sensing Proximity detection Speed detection

• Screen Size:: 3.5 inch
• Processor Type:: Samsung
• Memory Capacity:: 64MB
• Operating System:: Linux
• Place of Origin:: India
• Weight: 750 gms
• Style: Handheld Computer

We are one of the well established supplying a wide range of Industrial Sensors

• Type: Absolute
• Pressure Range: 0.1 to 1.18 Bar
• Vehicle Compatibility: Used in Trucks & Cars
• Suitable Media: Gas
• Supply Voltage: 5 V DC
• Interface: I/O Link
• Housing Material: Plastic
• Operating Temperature: -40 to 105 Deg C
• IP Protection Class: IP67

vibration monitoring system, ground support systems, Power Supply

• COLOR BLACK: 500 DPI

essl 9000 is a high resolution pc login device sensor with 5000 device and it is comes along with the software

Disposable Spo2 Sensor For GE, Cardiac Table, BIPAP Full Face Mask

Pressure Transducers, Pressure Sensors, Pressure Switches

Reflective Optical Sensor, card connector, Silicon Carbide Diode

Accelerometer, carbon monoxide detectors, dual axis accelerometer

UPS Sensors, Aircraft Windscreen Sensors, electronic thermostats

Optical Rotary Torque Sensors, Laser Particle Sensor

The Reverse Car Parking Sensor, offered by us, comes with superior video quality and lens (2.8 mm). Our reverse car parking sensor is waterproof & anti-shock and can be availed in different specifications as well.