Separation Equipment Dealers in Bangalore

• Material: Mild Steel
• Finishing: Coated
• Color: Sky Blue
• Application: Industrial
• Country of Origin: India

For quite a few number of years now, we have been supplying the Cross Flow Separator that we manufacture in our very own factories under the guidance of our knowledgeable experts. This separator is made of top notch materials sourced from authentic vendors that account for the premium quality and performance it houses. We deal in bulk and medium sized orders primarily. The rates are affordable and delivery is punctual.   Details : In the modern TPI System, the separating surface area is increased vertically by the addition of a number of parallel plates mounted at an inclination. This not only affords a dramatic space saving but also facilitates very small separating diameter. The K-pack TPI consists of a plate pack constructed of closely spaced corrugated plates inclined at a 45° angle or more, depending on the application. Waste water flows through these plated either parallel to the corrugations in "Counter-current Flow" or at right angles to the corrugations in "Cross Flow". Under laminar flow conditions, the short distance between the inclined plates is now the only distance over which the pollutants have to rise or sink before they are intercepted and separated from the mother fluid. Imagine a rectangular tank with a surface A containing a liquid to a height H (see figure 1). Flow through the tank is homogeneous and the flow rate = Q The settling or rising velocity of a particle with diameter d is governed by Stoke's Law It follows that the tank surface A is inversely proportional to the square of diameter d of the smallest particle which will completely separate. An increase in the efficiency of a separator can, as a result, only be achieved by a considerable increase in the surface A, which leads to the installation of large tanks with large surface area A. The effectiveness of such large tanks is limited due to factors like : Turbulence and short-circuit currents. Variation in ambient temperature. Temperature gradients in the liquid. Surface wind load.   In the modern TPI System, the separating surface area is increased vertically by the addition of a number of parallel plates mounted at an inclination. This not only affords a dramatic space saving but also facilitates very small separating diameter. The K-pack TPI consists of a plate pack constructed of closely spaced corrugated plates inclined at a 45° angle or more, depending on the application. Waste water flows through these plated either parallel to the corrugations in "Counter-current Flow" or at right angles to the corrugations in "Cross Flow". Under laminar flow conditions, the short distance between the inclined plates is now the only distance over which the pollutants have to rise or sink before they are intercepted and separated from the mother fluid. Application : Mineral oil refineries, oil extraction, offshore platforms Tank storage farms Ballast water treatment Petrochemicals Galvanizing metal; mining industry Edible oil refining Foodstuffs industry Paper & pulp industry   The Cross flow separator system permits simultaneous separation of floating and settling materials like oils, fibres, sand etc.. But are also individually applicable as oil and solids separators. The raw water containing oil and/or suspended solids passes in horizontal direction between the closely spaced plates in the plate pack. Completely laminar flow conditions are established while the water flows across the plate pack from the inlet to the outlet side. Laminar and stable flow conditions are essential conditions for the effective gravity separation of the water, oil and/or the suspended contaminants.   Oil separation : In the course of passing through the plate pack from inlet to outlet, the oil floats upwards info the tops of the corrugations and rises up the incline of the plate to the surface of the separator, where it is removed by a skimmer. Solids Separation : The solids move towards the Bottoms of the corrugations and slide down the incline of ' the plate. From there the separated solids are collected in the sludge compartment of the separator to be partially dewatered and transported by a shaft less spiral conveyor and intermittently discharged through a blow-off valve (optional). Settled sludge cannot decontaminate the treated water. Oil and solids move in separate directions, but both perpendiculars to the flow of water, eliminating particle re-entrainment completely. All K-Pack separators are custom built with respect to the number of plates in the pack, the length of the plates, the distance between the plates and the plate incline. The number and the length of plates is determined as a function of the raw water flow rate to be processed in the separator. The distance between the plates is depending upon the concentration of solids / sludge in the raw water. The incline of the plates is set between 45 and 60 degrees depending upon the general nature of the Oil and/or sludge, (density, viscosity, concentration). The systems are fabricated in mild steel and other materials are available on request. The oil separators are standard with oil and skimpipe and 45 degree shaped compartment. The solids separators are optionally with a shaftless conveyor in the sludge compartment. In the corrugation tops a very high oil concentration is established. This is the ideal condition for oil coalescing to take place (formation of large oil droplets out of many small oil droplets). In the corrugation bottoms a high sludge concentration is established. This is the ideal condition for particle agglomeration to take place (formation of heavy particles from small and relatively light particles) Applications Mineral oil industry Edible oil industry Metal industry Ceramic industry Galvanic industry Mines Sand separation after washing of contaminated soil Food industry

• Shelf Life: 10
• Purity: 100

Work on Electrostatic Principle . Detect and sepearyea hair from all food raw materials and finished good

18,500/- Per unit. Extra packing and forwarding, extra transport, extra taxes

The Cyclone Separator is important equipment used to separate the material and the air. The air vents out from the cyclone separator and the flour falls in the mixer below the cyclone separator. We are acclaimed Manufacturer and Supplier of Cyclone Separator from India. We can make available this Cyclone Separator in different specifications depending upon buyer’s requirements. We ensure timely delivery of our products.

• Size: 300x250x230
• Color: BLUE
• Usage: OIL REMOVAL

GMP Design Available in inch (20" / 30" / 36" / 48" / ST / 72" ) Hopper design is suitable for use. Compact vibratory design for high speed & dust free sieving Machine operation is Noiseless and Maintenance free. Contact parts and screen material is SS 316. Low power consumption compared to reciprocating vibratory system. Easy dismantling and cleaning of parts. Machine available with flame proof and double deck option design. Castor wheel is fitted for easy movement.

The Mechanical Disc Oil Skimmers that we offer are made from high grade material using advanced adhesion techniques. By using Mechanical Disc Oil Skimmers one can reduce energy, labor providing better usage of material. Mechanical Disc Oil Skimmers also reduces the waste generated by different manufacturing operations. Clients can avail Mechanical Disc Oil Skimmers at market leading rates from us.

• Material: Cast Iron, Iron, Steel
• Color: Black, Grey, Blue
• Condition: New, Old
• Weight: 0-100 Kg, 100-300 Kg
• Capacity: 0-50 L, 50-1000 L
• Application: Commercial Kitchen, Canteen, Restaurant

• Material: Cast Iron, Iron, Steel
• Color: Black, Grey, Blue
• Condition: New, Used
• Weight: 0-100 Kg, 100-300 Kg
• Capacity: 0-50 L, 50-1000 L
• Application: Commercial Kitchen, Canteen, Restaurant

• Material: Aluminium
• Size/Dimension: 15 mm
• Efficiency: 99.99%
• Testing Pressure: 12 kg/cm2
• Media: Compressed Air

KleenSEP oil-water separator is innovative and yet simple and economical. It is head and shoulders above the other gravity based separators offered by competition and has innovative features that are unmatched.Technology : Oily water flows by gravity into the system or is pumped by a centrifugal pump using a self leveling floating suction device that pulls in large amounts of floating oil along with water. The oily water travels through the Oil-Water Separator where oil is separated by coalescing media. The oil rises to the top of the separator that can be drained out. Clean water that flows out of the separator will have less than 10PPM of oil and less than 25mg/ltr of TSS. Optional Micro fiber and Activated Carbon filters for polishing of output water also are provided. Applications : Coolant tank tramp oil removal/Component washing solution cleaning/Compressor condensate water cleaning/Ship bilge water recycling/Rolling mill waste water.   Now, oil separation from water is no more a hassle.

• Brand Name: Fleetguard
• Material: Cast Iron
• Finishing: Polished
• Driven Type: Hydraulic
• Shape: Round
• Pressure: High Pressure
• Connection Type: Cylindrical
• Usage: Automobile Industry
• Specialities: Excellent Functionality, Less Maintenance, Ruggedly Constructed, Durable
• Type: Oil Separator
• Country of Origin: India
• Model: FS19636

Based in Karnataka, India, we are actively functioning as a capable Manufacturer, Supplier and Exporter of Moisture Separator in every nook and corner of the world. The Moisture Separator that we deal in is available with us in nine different sizes. Plus, the Separator comes with efficient centrifugal moisture separation. One can acquire it from us in bulk orders and at the competitive rates. Rely on us!

1. Baffle Type: Efficiency 60 %2. Centrifugal Type: Efficiency 70%3. Demister Pad Type: Efficiency 80%4. Centrifugal cum Demister Pad Type: Efficiency 99%Moisture is most common contaminant present and the one which probably causes the most damage. Alpha Engineering provides wide range ofmoistrues separators for all flows, line sizes, pressure, temperature, flange ratings with an Advanced Moisture Relief System.