SERVE XL ENTERPRISES Sahakar Nagar, Bangalore, Karnataka

Principle of Vortex meter is based on the Karman vortex street.• Application: Gas, Liquid Steam• Meter size: DN 15 to DN300• Flow: Liquid 1.2 – 6.2 to 200 – 2000 m3/h , Gas/Steam 5 – 25 to 1380 – 11000 m3/h• Accuracy: Liquid ±1% of reading , Gas/ Steam ±1.5% of reading• Power Supply: 24 VDC / Battery operated• Transmitter: 4 to 20 mA DC current signal• Protection: IP 65

• EUTURB consists of a multiple-bladed rotor mounted in a pipe, perpendicular to liquid flow.• Application: Water, Diesel, Gasoline, Oil etc.• Meter size: DN 4 TO DN 500• Flow: 0.04 – 0.25 to 400 – 4000 m3/h• Power Supply: 24VDC / Battery operated• Flow, Totaliser display: optional• Transmitter: 4-20mA DC• Protection: IP 65

• Range : 70 to 1500mm• Gauge Glass : Tempered Borosilicate• Wetted Parts : CS, SS304/316, PP or PVDF• Max. Temp : 180ºC• Max. Pressure : 10 Kg/cm2• Options : Autoball check, Illuminator, Frost-Free Extension, Steam Jacketing, Spring Loaded or Weighted Valve for marine application

Insertion Length : 200 – 1500mmWetted Parts : SS304Max. Temp : 150°CMax. Pressure : AtmBulk Density : 500-1000 g/cm3O/P : 5A, 250VAC x SPDT/DPDTEnclosure : Cast Al x IP66Options : Flexible Spring Shaft, Extended Shaft, Ash Seal Assembly

Range : 230 to 2000mm• Gauge Glass : Tempered Borosilicate• Wetted Parts : CS, ASTMA-105, SS304/316,PP• Max. Temp : 400°C• Max. Pressure : 210 Kg/cm2• Options : Autoball Check, Illuminator, Frost-Free Extension, Steam Jacketing, Spring Loaded or Weighted Valve for Marine Application

Differential Pressure measurement type Flow Meter. Can be used for clean Non-Viscous liquids and variety of gases. Special models for corrosive fluids are also available Pipe Size : min 1” and above Accuracy : +2% of Full Flow Rangeability : 7 : 1 or 5 : 1 GTR Type : 10 : 1 on request Rangeability MTR Type : 3 : 1 Accessories : High & Low flow alarms. Transmitter : Against Specific Request.

MODELS:• Orifice Plates• Restriction Orifice Plates• Orifice Flange Assembly – Orifice Plate with weld neck Flange Union / Slip on Flange Union• Orifice Plate with Carrier Ring• Integral Orifice Assembly • Vent / Drain holes are provided as per customers requirement• Types: Square Edge Concentric, Quadrant Edge, Conical Entrance , Eccentric,Segmenta

Variable Area Flow Meter• Can Be used For All Kinds Of Gases And Clear Liquids• Rangeability – 10 :1• Scale Length – 90 degrees Angular• Max Pressure Rating: 20 -40 Bar• Allowable Fluid Temp: -10 Deg to 250 Deg C• Connection: Flanged, Threaded, Sanitary Fittings.• Material of Construction: SS 316, SS 316L , SS 304, HASTELLOY C , TITANIUM• Indicator Box: ABS, PC, Cast AL, SS(optional)• Transmitter : Against Specific Request.

 Wtd Parts : SS304/316, PP or PVDF• Max. Temp : 350ºC• Max. Pressure : 20 Kg/cm2• Liquid Density : ≥0.6 g/cm3• Contacts : 5A, 250VAC x SPDT/DPDT• Enclosure : Cast Al x IP66 or Ex-P IIB/C• Options : Small/Large floats & screwed/flange process connections

 Range : upto 3000mm• Wtd Parts : SS304/316, PP or PVDF• Max. Temp : 150ºC• Max. Pressure : 10 Kg/cm2• Liquid Density : ≥0.6 g/cm3• Contacts : 40VA (NO), 60VA(C/O)• Enclosure : IP66 or Ex-P Gr IIB or IIC• Options : Intrinsically Safe, Small /Large/Multiple Floats, In-Situ Test Device

 Input (RTD, Volts, mA)• Fail-safe Design protecting the process in case of system malfunctioning• Bright Red seven segment LED Display• Display brightness control• Status Indication LEDs• Relay Output (optional)• Retransmission output (optional)• RS485 Modbus Communication (optional)• Transmitter Power Supply• Relay/ retransmission output mapping with respect to input

Variable Area Flow Meter Can Be used For All Kinds Of Gases And Clear Liquids under critical conditions.Materials of Construction Tube : Borosilicate Glass Float : SS316, PTFE, other on request Packing : Neoprene, PTFE, Silicon, VITON End Fitting : Mild steel, Carbon steel, SS304, SS316, CF-8M, CF8, Cast Iron PTFE lined,SS lined, PVC, and any other desired material subject to its availability. Frame & Cover : Mild Steel, SS (optional)

Insertion Length : 250 – 2500mm• Wetted Parts : SS304/316• Max. Temp : 200°C• Max. Pressure : 10 Kg/cm2• Bulk Density : > 0.5 Kg/m3• O/P : 5A, 250VAC x DPDT• Enclosure : Cast Al x IP66 or Ex-P IIB• Options : Integral, Two part

Range : 1 – 20 mtrs• Gauge Board : Aluminium• Density : ≥0.8 g/cm3• Wtd Parts : SS304/316, PP• Max. Temp : 150°C• Max. Pressure : Atm• Options : Sealpot, Alarm Switches

 Ultrasonic Flow Meter• No shutdown, no lost production• Low maintenance , quick and simple installation• Cost effective solution, particularly for large pipes• Models : Handheld / Wallmount• Easy to handle Clamp on sensors• Sensors available for the pipe diameter range of DN 15 to DN 6000

• Differential pressure Flow Meter• PRESSURE : 20 Bar, Higher on Request• TEMPERATURE :100°C, Higher on Request• LINE SIZE: 3/4″ to 6”• END CONNECTIONS: Flanged as per ANSI B 16.5 or any other std.• ACCESSORIES1) Power Supply for DPT with indicator with or without totaliser2) Flow Computer with Pressure Transmitter & Temperature Transmitter for compensation.3) Impulse Tubing4) Manifold5) Condensing Pots6) D. P. Transmitter

• Range : upto 15 mtrs• Wtd Parts : SS304/316, PP or PVDF• Max. Temp : 300ºC• Max. Pressure : 40 Kg/cm2• Liquid Density : ≥0.8 g/cm3• Contacts : 5A, 250VAC x 2SPDT• Enclosure : Cast Al x IP66 or Ex-P IIB or IIC• Preset Levels : One to Four

Range : 100 to 10000 mm• Wtd Parts : SS304/316• Max. Temp : 100ºC• Max. Pressure : 5 Kg/cm2• Liquid Conductivity : ≥25 us• Contacts : 5A, 250VAC x SPDT• Enclosure : Cast Al, IP66 or Ex-P IIB

   Range : 500 – 5000mm• Wtd Parts : SS304/316• Max Temp : 60°C• Max Pressure : 5 Kg/cm2• Dielectric Constant : CPT≥ 1.8• O/P : 4-20 mA, RS485• Enclosure : Cast Al x IP66 CATALOGENQUIRY