Shree Glass & Plywood Rajajinagar, Bangalore, Karnataka

n the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing "lehr"; and then annealed glass is heated to a temperature near its softening point and forced to cool rapidly under carefully controlled conditions. The heat treating process produces highly desirable conditions of induced stress, which result in additional strength, resistance to thermal stress, and impact resistance. The features specifications of these mirrors are as follows: Safety, once broken, it splits into tiny harmless pieces. Hardness, 4 times harder than ordinary float glass. Special logo and pattern can be printed on tempered glass. Outstanding performance in resisting thermal stress and wind-load. Application: Traffic vehicles, such as the windows of train, bus, car etc Architecture, such as windows or other areas in a building Household appliances and furniture, such as glass table top and show shelves. Showroom front side glasses Glass partition Table tops Patch fitted doors and shower cubicles. + False flooring and false ceiling. Thickness Availability 3.5mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 15mm, 19mm

We offer tinted glass in different shades like bronze and grey, green and blue which dramatically cut glare and heat from the Sun (solar gain) yet only slightly reduce the amount of natural light admitted into your place.  Where sun-caused fading or damage may be a serious problem, such as at unprotected south-facing windows, you may want to opt for reflective glass.   Following are some of the specification available in our product: It can be bent, tempered or heat strengthened and laminated. Reducing transmission of harmful UV rays and minimizing fading to interior furnishing and keep interior atmosphere cool. Harmonizing with modern building materials to provide an exciting and elegant look to new buildings Applications: Architecture application. Automotive application. Furniture application. Building Front Elevation  Fabrication Works Thickness Availability 3.5mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm

Reflective glass is a product resulted from multi-metal coatings on the float glass as raw material. Through the application of vacuum coating, the finished product characterizes various visual effects and different optical and calorific features. Reflective glass absorbs and reflects a major proportion of the sun's direct energy more effectively than tinted glass. A coating is applied during glass manufacture. It is ready to be cut heat .This product is called a hard coat reflective. The features and specifications of this climber are: Reflects light and heat with a metal oxide coating giving a mirror finish. Minimized solar heat gain and ultraviolet light transmittance. Reflective glass adds daytime privacy with its reflective, mirror-like surface Reflective glass can be tempered for added strength in certain industrial applications. Insulated glass with reflective glass on one side can prevent noise pollution also and is used for acoustics purpose. Applications: Door windows Panel Double glazed window Panel Architecture application. Automotive application. Furniture application. Building Front Elevation  Fabrication Works Thickness Availability 4.0mm, 5.0mm, 6.0mm Colors Ocean Blue, French Green, Dark Gray, Bronze, Green, Safari Blue, Titanium Blue, Super Silver Blue, Gold and others 

The mirrors we sell are produced with high state of the art process as per international standards, These Mirrors are waves free and distortion free and reflect maximum.   The features specifications of these mirrors are as follows: Made of waveless float glass Double coated paint Exact image, high reflectivity, reflection ratio is about 90 percent The mirror can be made into safety mirror through sticking special PE film in the backside Deep processing, can be cut into any size and any shape and sand blast process is available. Polished edge processing, round edge, flat edge and beveled edge, etc. In order to meet the environment requirements of EU, USA and other countries, we can also supply copper free silver mirror on bulk orders. Applications Bathroom, Gymnasium Wall, Dressing Room, Furniture Architecture, such as windows or other areas in a building Household appliances and furniture, such as glass table top and show shelves. Thickness Availability 2.0mm, 3.0mm, 3.5mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm Colors White / Clear, Grey & Bronze 

Flex laminates are used for applications, where a rolled edge is desirable.  The rolled edge eliminates  seams and produces a smooth, attractive appearance to the finished assembly. Typical use of Postforming laminates include countertops, cabinet doors, drawer fronts and desktops. Hylam laminates used for switch boards are available in 2.5 mm, 2.8 mm and 3.00 mm thicknesses The other grades of laminates are liner grade for inner use in furniture to avoid painting the inner area of furniture, Marker Grade for White Board, Chalk Grade for writing. Etc Further laminates come in many finishes like HI GlOSS, Metalic, Techno, Brushed, Leather, Microline, Vertiline, Spectrum etc..Decorative Laminates laminates produced from the best of the material with strength and endurance to last a life time and varied options in colours, textures, feel and finish would certainly prove to be a delight for the prospective consumer. Decorative laminates are fast redefining the way you look at offices and homes, leaving an everlasting impression of the finest quality and superior class on the community of connoisseurs.

Patterned or figure rolled glass is made by running molten glass over a patterned roller which reproduces the pattern on the glass. In addition to diffusing light and obstructing visibility from the outside, the figure softens the interior lighting. Figured roll glass is used to diffuse, not obscure, an object when viewing. The glass is also used as a popular decorative product.  Wired glass is translucent glass held by wire mesh.  Wired glasses are also used for skylights as this glass does not fall when it cracks or breaks.  Wired glass is available only in 6mm thickness.   The features and specifications of this climber are: Figured glass is a decorative and translucent glass with figures on one face. The patterns are able to soften the light in a space and, at a suitable angle, to curtain the visibility through it. Figured Glass is used for window and door interior partition reception room furniture, bathrooms & show shelves etc. Thickness Availability 3.5mm, 4.0mm, 5.0mm 

We process decorative glass - beautiful and visually exciting alternatives to standard interior glasses. We are committed to providing commercial & residential builders, homeowners and decorators with interior glass that are not only elegant, but also high in quality and affordable.  We process different decorative glass like- stained glass, etched glass, V-Groove, Color Etch, Ceramic Coated glass, Acid etched glass, Cluster Work, Booch glass work, fusion glass etc.   The features of this glass are: Very elegant and neat to suite the interiors. Custom made as per your specifications. Improves the interiors of the Residences, Hotels, or Commercial place. Widely used in interior decoration, residential and commercial settings.

Clear float glass is made of molten glass which flows through tweel to tin bath and then to lehr. While floating through the molten tin, the glass under the works of gravity and surface tension becomes smooth and flat at both sides. Clear float glass is transparent and offers a high visible light transmittance. These products are sourced from good quality float glass producers. Clear float is sold as cut-to-size or bulk form. Clear float is also available in laminated and toughened form.Our float glass products are very high quality with perfectly flat, excellent optical performance, stable chemical capability and high mechanism intensity. There is no distortion/roller wave or other imperfections and it's able to be tempered and further processed. The clear float glass is also resistant to acid, alkali and corrosion. The specifications and features of our float glass are as follows: Smooth and flat surface, and good vision. Flexible size specifications minimizing cutting loss. Substrata for each level of glass processing. Float Glass Is used for : Architecture Mirror Full shaded windows Showcases and other displays Glass panels and screens Furniture and decoration Thickness Availability 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 15mm, 19mm Size Max upto 2440mm x 3660mm Note: We can also provide any specific size if the order is upto 2 ton