Silcarb Recrystallized Pvt. ltd. Malleswaram, Bangalore, Karnataka

U-Shaped Alpha SIC Rods a Thickend Bridge, both terminals from one side of the Furnace. Ideal for drop through design, radiant tube systems or where one element will not span the heating chamber. We have carved a niche amongst the most reputed names in the market and are into offering Three Piece Straight Alpha Sic Rod. This Three Piece Straight Alpha Sic Rod is made by Silcarb Recrystallized in strict adherence with set market quality standards and norms. Our customers can obtain these products from us at feasible rates.

Silcarb manufactures Tower Melting Furnaces from 500 kgs up to 10000 kgs capacity with a throughput of 3000 kgshour. Tower Melting Furnaces are mainly shaft furnaces (Tower Furnace) and are manufactured keeping in mind ease of operation and cost of running the Furnace.All castables and backup linings used are the best in the industry and Silcarb usually. Silcarb requests the customer to visit during the casting process of the Furnace. Silcarb uses various burners and burner combinations to get the desired fuel efficiencies.Furnace charging is done either from the top using a skip charger or end using a push charging systems.Various types of Tap out Furnaces are made such as direct bailout, tilting type and tap out cone systems.

Tower Melting Cum Holding Furnaces These Furnaces can be used for both melting and holding Aluminum. Various combinations of heat sources are used, the preferred heat source combination for melting is fuel fired and holding being electric. This combination gives the best results in terms of burning losses, fuel efficiency and temperature accuracy.

Silcarb manufactures Hydraulic Tilting Type Furnaces with energy efficient Silicon Carbide Heating Elements as the heat source. These furnaces range from 200kgs of aluminium up to 1000kgs of aluminium. Copper furnaces from 200kgs up to 1 Ton capacities are manufactured.

Three Piece Straight Alpha SIC Rods which run cooler than any one piece cold ends. Heat is concentrated in the Furnace, not the ends, for energy efficiency. Maximum Temperature 1550° C.Silicon Carbide Heating Elements for the past three decades,

Three pieces Alpha Rod features welded low resistance (LRE) cold ends which run cooler than any one piece cold ends. Heat is concentrated in the Furnace, not the ends, for energy efficiency. Maximum Temperature 1550° C. Silcarb has been in the field of Manufacturing Silicon Carbide Heating Elements for the past three decades, with its plant located at BANGALORE, South India. Silcarb, having established itself as a quality supplier of Silicon Carbide Heating Elements over the past three decades, has now introduced a state-of-the-art technology Furnaces for various applications. Silcarb has one of the highest Hot: Cold ratios of 1:40, which makes it one of the most energy efficient Silicon Carbide Heaters.

Three pieces Alpha Rod features welded low resistance (LRE) cold ends which run cooler than any one piece cold ends. Heat is concentrated in the Furnace, not the ends, for energy efficiency. Maximum Temperature 1550° C. Silcarb has been in the field of Manufacturing Silicon Carbide Heating Elements for the past three decades, with its plant located at BANGALORE, South India. Silcarb, having established itself as a quality supplier of Silicon Carbide Heating Elements over the past three decades, has now introduced a state-of-the-art technology Furnaces for various applications.

Reverberatory Furnaces Silcarb also does 'on site' installation and rework of Reverberatory Furnaces.Reverberatory Furnaces as per customers requirements and up to capacities of 10000 kgs.

Silcarb Recrystallized Pvt Ltd is one of the top global award winning manufacturer and supplier company of reverberatory furnaces since 1985.Silcarb manufactures Reverberatory Furnaces as per customers requirements and up to capacities of 10000 kgs. Reverberatory Furnaces for scrap melting are manufactured by Silcarb. Silcarb also does 'on site' installation and rework of Reverberatory Furnaces.

Reaction Bonded Single Spiraled Heating Elements are made from thin walled tubes of Alpha Silicon Carbide, which are dense and resistant to oxidation. Spiroheat Elements operate in most industrial and laboratory Furnaces at temperatures up to 1600oC. Spiroheat Elements being a thin walled, fine grain form of reaction bonded Silicon Carbide, will withstand very rapid heating and cooling cycles, severe thermal shocks, and high Electrical loadings. The Spiroheat range of elements are available in different product forms to suit a variety of heating processes.

Reaction Bonded Double Spiraled Heating Elements have all terminal connections at one end. These Single Ended Elements are made of Reaction Bonded Silicon Carbide. Typical density of Spiroheat Elements are 3.3 Gms.cc – 3.4 Gms.cc. These are ideal where Furnace access is limited to any one plane.

Molybdenum Di-Silicide Heater is a high density material consisting of molybdenum disilicide (MoSi,) and self forming glaze of silicon dioxide (SiO2). It can be used upto Furnace Temperature of 1800°c. These Elements do not age and have a long service life. The elements are U shaped and are mostly used suspended with the bottom of the "U" down. The element consists of two cold ends(Lu) and a U-shaped hot section(Le). The cold ends are twice the diameter of the hot section and are attached by a weld. The extremities of cold ends are metallized with aluminium to provide a low-resistance contact area to which the end zones are made with flat braided aluminium straps.

Temperature : 1800°c.

Silcarb manufactures Aluminum holding Furnaces using high-density calcium silicate boards as the metal contact material. These Furnaces use Silicon Carbide heating elements as their main heat source.

Heat Treatment Furnaces on quality and have set highest standards to maintain optimum product quality. The product we are offering is widely known for its energy efficiency and enhanced serviceability.

Silcarb manufactures Electric Forging Furnaces for Ferrous castings and Aluminium castings. Silcarb manufactures three type of Forging Furnaces (for both Ferrous and Non-ferrous)

Dumbell Shaped Silicon Carbide Heating Elements the enlarged cold ends of the Dumbbell style element were originally made with over sized cold ends to increase cold end cross section, lowering electrical resistance, thereby lowering cold end operating temperatures. Over size cold ends are therefore no longer necessary, the old style resistance ratio was 1:3, whereas the new DB resistance ratio is 1:40. Maximum temperature is 1550 deg. C. (For Dimensions, Resistance, etc. kindly contact us):

Crucible Type Tilting Furnaces For Copper with energy efficient Silicon Carbide Heating Elements as the heat source. These furnaces range from 200kgs of aluminium up to 1000kgs of aluminium. Copper furnaces from 200kgs up to 1 Ton capacities