Solar Controller Dealers in Bangalore

We offer a wide range of MPPT Solar Charge Controller to buyers in the domestic as well as international markets. Our MPPT Solar Charge Controller is ideally used for converting a high voltage DC output from solar panels down to lower voltage needed to charge the battery. They are specially designed and developed using progressive technology, advanced tools and components. These controllers are easy to operate and provide high performance for a longer duration. We are a renowned MPPT Solar Charge Controller Exporter and Supplier from Karnataka (India). Buy them from us at highly affordable prices.   Functions Always keep the battery full voltage condition. Prevent the Battery from over charging / discharging  Prevent the battery from reverse charging to solar panel during nights. Reverse polarity protection for battery. Reverse polarity protection for solar panels. When the current of the load exceeds the rated current of the controller, the controller will activate the protection mode and lock up. Available 12 / 24 / 36/ 48 / 72 volts with 10 / 20 /30 / 40 AMPS charging current.

• Brand Name: ENSmart

• Type: Ac Solar Pump
• Application: Farm Irrigation, Submersible
• Voltage: 440V
• Fuel: Solar Water Pump
• Application: Agriculture, Deep Well Pumping, Industry, Water
• Automatic Grade: Automatic
• Power: Solar

saurally provides highly efficient solar water pumps that areautonomous and does not require any batteries. Vfd used by oursystems is of highest quality that is governed by advancedalgorithm to achieve maximum solar power conversion.saurally also facilitates conversion of normal water pump intosolar water pump. This reduces the investment on a new pump forthe farmer. features: vfd with advanced german technology superior performance & high capacity high efficiency mppt based pure sine-wave inverter completely manufactured in india extensively tested products with quality certifications

• Voltage: 12 / 24 /36 / 48V: Current: 10 / 20 / 40 / 60A

We are offering solar charge controller with zero drop. with in-built intelligent change over & digital voltmeter. model: pgd-scc-zd voltage: 12 / 24 /36 / 48v current: 10 / 20 / 40 / 60a full charge cut off: 14.5 / 29v / …………. over voltage cut off @ 14.3v / 28.6v / …………. charge reconnect @ 13.5 v / 25.5v / …………. under voltage load cut off @ 11.5v / 23v / ………… load off while charging. indication & readings solar: it will glow when solar is connected. charger on: it will glow when charging starts. relay on: it will glow when relay is on display: it will show solar voltage by using 3 digit 7 segment display auto: relay will on when it reaches at 14.3 / 28.6 volt, it will be in on position up to 11.5 / 23 volts. manual: above mentioned relay function do not work in manual mode.

Long Life up to 25 years Multi layered selective coating (sputter technology) for better heat absorption Shorter payback period compared to other models of solar water heater

Available in 10A & 20A models. Suitable for both 12V & 24V PV panels with dusk to down or manual mode. Intelligent Battery Charging for extended life with battery level indicator Complete cutting edge, Indigenous & Field proven Solutions are offered for Solar & LED lighting ranging from LED Bulbs, LED Tube light, Down lights Street lights & to Solar Power plants

Emerge Solar Charger Controller is a Maximum Power Point Tracking (MPPT) is fully configurable and developed to meet the highest industry standards, the MPPT solar charge controller  ensures maximal efficiency in retrieving energy from any PV system. When connected to solar panels and batteries, the solar charge controller automatically charges the batteries in an optimal way with all the available solar power using its algorithm for Maximum Power Point Tracking (MPPT).Solar charger controller’s sophisticated three stage charge control system can be configured to optimize charge parameters to precise battery requirements. The unit is fully protected against voltage transients, over temperature, over current, reverse battery and reverse PV connections. An automatic current limit feature allows use of the full capability without worrying about overload from excessive current, voltage or amp-hour based load control.Features and performances Ensures an optimal energy production Tracking efficiency: >99% Conversion efficiency: 98% 3 step charger for longer battery life Low self-consumption: <1W in night mode Protection against incorrect wiring Protection against reverse polarity Fully configurable IP54 enclosure Compatible with all PV system

Solar Charge Controllers Lambdoid Wireless manufactures a wide range of solar PV charge controllers for home lighting, street lighting and other custom solutions. Solar Charge controllers (SCC) protect battery from over-charging and / or excessive discharge and they are an essential component for any PV solar system. Lambdoid has the state of art expertise in design and development of custom requirements. Salient Features: Excellent Charging Algorithm Required protections and indications Negligible Voltage drops Self consumption (

Lambdoid Wireless manufactures a wide range of solar PV charge controllers for home lighting, street lighting and other custom solutions. Solar Charge controllers (SCC) protect battery from over-charging and or excessive discharge and they are an essential component for any PV solar system. Lambdoid has the state of art expertise in design and development of custom requirements.

Solar Charge Controllers from 3Q Magnetics are the best option for compact, stand alone solar systems. This charge controller's heart is a microprocessor which controls display, protection, indication and alarm functions, guaranteeing optimal charge control to give maximum life to your battery   Features Fully solid-state. MOSFET controlled Advanced microcontroller technology Accurate and stable voltage settings Series PWM charge control Bulk and Float charge Temperature and cable drop compensation LCD display for voltages and currents Key pad to facilitate voltage setting changes Functional and alarm indication by LEDs Two stage lightning and surge protection at SPV input MCBs in series with SPV and battery for safe operation

• Battery Input                                 : 12-24V Auto
• Charging Current (A): 60
• Discharge Current (A): 60
• Max. Solar Input (V): <50
• Features: Built-In Industrial Micro Controller,Big LCD Display,Full 4 Stage PWM Charge Management,Dual MOSFET Reverse Current Protection,Low Heat Production

The SPPL-PS1224 is suitable for small business, commercial and residential installations.  The Panel capacity can be up to 800W for a 12V system and up to 1600W for a 24V system. The Power Steering automatically detects the system input voltage when the battery is connected.  Note:  The battery must be connected first and then the Solar panels. Convert any UPS/Inverter to a Solar PCU by adding this as a card inside or a box outside. Only unit in India with all power parameters being displayed on a LCD. Only unit in India where you can customize the LCD display to show your name – make it your own product and brand. Can be programmed by a USB dongle by inserting it into the LCD connector on the board. Simple terminal program with simple instructions make it very easy to customize

This is a highly cost effective and efficient PWM charge controller which could be incorporated in any UPSInverter or as a ‘Stand-alone Charger’ for Solar Panels, charging batteries. Driven by a Microcontroller, it has high Open Circuit Voltage limit and a good Vmpp range for a PWM design. Automatic Mains disconnectreconnect feature and Automatic DC Load disconnectreconnect feature make it a complete application friendly solar charge controller. The LED indications include Solar charger OnOff and Battery BoostFloat charging.

• Application: Solar Charge Controller
• Model Number: B07X21SXWQ
• Brand Name: Epever
• Voltage: 12 V
• Phase: Single phase
• Rated Load Power: 60 W
• Grid Changing Current: 5 A

.

• Feature: Prevents battery from overcharging,Prevents reverse current flow from battery to panel at night,Runs DC appliances,Charge DC devices directly without using adapter via USB port
• Application: Homes and Small Shops
• Power: 200 W
• Model Number: SCC 1210
• Charge Controller Type: PWM
• Brand Name: Luminous
• Voltage: 12 V

Sun Base (SB) 60 is one of the most rugged PWM controllers in the Alpha India's line up. The charge controller is developed in accordance with the MNRE specifications for the Solar Home & Street Lighting Applications. It has been deployed in remote forest area under no human intervention. Simple analog controls provide absolute reliability of the control system.   60W PWM Charge Controller 12V Battery Charger PWM float mode Automatic load control for dusk-dawn functionality (optional) LED Visual Indications

Features   Enclosure – IP54 category Wide MPPT Range Automatic Start & Stop based on solar Irradiation Max I/P Voltage Model: 800V Ground water extraction for Irrigation, Commercial and Household use Particulate filter for air intake and exhaust 3 hp, 5hp, 7hp & 10hp Dry run protection IEC 61683/IS 61683 & IEC 60068-2(1,2,14,30) 5 Years Warranty Suitable for both Open Well and Tube Well MC4 connector for Solar input

Luminous Charge Controllers are PWM based controllers with 98% efficiency. It has option of USB charging & dusk to dawn feature. It comes in ratings of 6/10/20Amp. Electronic & Software controlled protections. Maintenance Free. USB Mobile charger Output. Option of SMF and Lead Acid Battery selection. Features Automatic selection of 12v/24v battery Aesthetic & compact design 98% efficiency Fuse-less electronic & software controlled protections USB port Option of SMF and lead acid battery selection Load controller with LVD & dusk to dawn feature Technical specifications PWM based technology Automatic battery voltage selection of 12/24Volt (Available in 10amp & 20 Amp) In built low voltage disconnect (LVD) & 20% extra power than rated capacity 125 Watt panels in 12 system in 6Amps ; 200Watt & 400Watt panels in 12/24Volt system in 10Amps 400Watt & 800Watt panels in 12/24Volt system in 20Amps

• 12V and 24V: Up to 60A
• Simple to connect and setup: We can supply just the PCB if you want to manufacture yourself

How many products do you see in the market that shows real time power generation from Solar? Ours does. In addition, our Solar charge controller also shows totalized values for Ampere Hour and Watt hour and more. See your totalized KWH and Ah reading increasing as you continue using our Solar charge controller. Our major value add is as follows: � Shows Voltage, Current and Power in Watts during Solar power generation. � Find the Peak Amps that was generated � validate your Solar Panel AND know when to CLEAN your panels when the Amps drops. � Find the Voltage Minimum. This value shows when your inverter or UPS cut off due to battery low. This will help save your battery from deep discharge and a short life. � Find the Peak Amps. The peak Amps shows the maximum value ever generated by your Solar panels. � Watch the Ampere Hour increment in real time. See how fast your battery is charging. You can get a good idea of your battery condition by looking at its charging rate in real time. � Watch the Watt Hour in real time. See how much your load is consuming in real time. � LCD 16 character x 2 Line shows a comprehensive display. Unbeatable value.

• Application: Solar System Controller
• Model Number: VMX-PWMSCC-12V5A
• Voltage: 12v
• Place of Origin: Karnataka, India
• Battery type: Lead-acid Lithium
• Maximum Current: 5 Amps

The Maximum Power Point Tracking (MPPT) algorithm is used in advanced solar charge controllers to track the peak power delivered by a solar panel and maximize the energy harvested by the panels.MPPT varies the electrical operating point of the modules and enables them to deliver maximum available power. The voltage at which PV module can produce maximum power is called ‘maximum power point’ (or peak power voltage).

• MPPT Charge Controller: Solar

We are offering mppt charge controller. energy win's ewt- charge controllers are compatible with 24/48v modules. the optimum charge/float voltages for flooded lead-acid, gel or agm batteries can be selected in the charge controller. the easy-to-read display can be augmented with an optional remote monitoring system. features: • mppt accuracy 99.5% • conversion efficiency ~96% • fan controlled cooling • lcd display with simple function keys and status display on led • charging current and voltage are adjustable according to different battery types • communication interface provided with rs232 • optional online monitoring system with gsm-gprs modem.

PPT Series 10KVA to 400KVA 3Phase - 3Phase

Agarbatti Stick, led batteries, solar electric lighting, Solar Generator

Street Lighting Solar Charge Controllers

Street Lighting Solar Charge Controllers, power conditioning unit

MPPT and PWM Solar charge controllers, Led Lightings, Induction Lightings

LED Round Tube Light, Solar Grid Tie Inverter, Solar Power Inverter

Led Light, Led Solar Lanterns, Led Street Lights, LED Bulbs, Led Lights