Solar Pump Dealers in Bangalore

• Material: Stainless Steel
• Color: Black
• Power: 1Bhp, 3Bhp, 5Bhp

A solar water pump is a type of pump that is driven by the electricity produced from solar panels. Solar pumps are manufactured to supply an eco-friendly and less expensive solution to pumping water in areas where there is no access to the power grid.

• Type: Ac Solar Pump
• Application: Farm Irrigation, Submersible
• Voltage: 440V
• Fuel: Solar Water Pump
• Application: Agriculture, Deep Well Pumping, Industry, Water
• Automatic Grade: Automatic
• Power: Solar

saurally provides highly efficient solar water pumps that areautonomous and does not require any batteries. Vfd used by oursystems is of highest quality that is governed by advancedalgorithm to achieve maximum solar power conversion.saurally also facilitates conversion of normal water pump intosolar water pump. This reduces the investment on a new pump forthe farmer. features: vfd with advanced german technology superior performance & high capacity high efficiency mppt based pure sine-wave inverter completely manufactured in india extensively tested products with quality certifications

Features   Enclosure – IP54 category Wide MPPT Range Automatic Start & Stop based on solar Irradiation Max I/P Voltage Model: 800V Ground water extraction for Irrigation, Commercial and Household use Particulate filter for air intake and exhaust 3 hp, 5hp, 7hp & 10hp Dry run protection IEC 61683/IS 61683 & IEC 60068-2(1,2,14,30) 5 Years Warranty Suitable for both Open Well and Tube Well MC4 connector for Solar input

A submersible pump is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped.The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation difference between pump and the fluid surface. Submersible pumps push fluid to the surface as opposed to jet pumps having to pull fluids. Submersible pumps are used for drainage, sewage pumping, general industrial pumping and slurry pumping. They are also popular with pond filters.

Easy installation and Low Maintenance Simple and Reliable No Fuel Spills or Cost High Efficiency Modules

A solar pump uses power derived from sunlight that is converted into electrical power by Solar Photo Voltaic(SPV) modules, which give higher power output in the afternoons and lower power output in the mornings and evenings. As a result, a solar pump works on varying power input and gives varying water output at a given pump head. On the other hand, a grid powered/diesel operated pump set, while working at a particular pump head, works with constant power input from the grid/diesel engine and provides constant water output at the given pump head. E.g. standard 5 HP pump working on grid power/diesel engine for say, 2.5hours a day, may give the same water output in a day as a solar pump of 3HP working for 8hours using sunlight. This is an important fact to keep in mind for appropriate solar pumps selection and application engineering. The most important parameters to select a solar pump are: how much daily water needed, at what pump head, and at which location. The location is important because solar energy varies from region to region, and sizing of solar panels depends on the solar energy of a region.

• Feature: Rust resistance, High efficiency, Low noise level

Converting to solar power is the answer to fighting the menace of load shedding in urban, Semi Urban and Rural areas. By doing this, the FUEL BUNK Owners will not only save on the recurring costs of electricity and generator expenses but will also ensure continued and uninterrupted supply to the customers. Switching to solar energy would free from them from adverse effects of load shedding and help save over 70 per cent on electricity and Diesel Generator bills.

Tata Solar SaawanTM is water pumping solution system that offers a cost effective alternate to conventional water pumping systems. It comes in various configurations (ACDC) with submersible & above the surface options. Whether you are in a remote location where the cost of running traditional water piping is prohibitive or you have no or limited access to grid, Tata Solar SaawanTM is the right product for you.

Suitable for domestic and comercial aplication   Available in surface and submersible well requirments   Maximum effieciency ,Maximum savings   Available in different capacities.    

• Brand Name: Duron Solar
• Type: water pump
• Place of Origin: Karnataka, India
• Use: irrigation
• Port: Chennai, India

• Application: Agriculture
• Capacity: 1 HP
• Pump Type: 3 Phase-Solar Submersible pump
• Motor Type: AC
• Voltage: 36 V
• Country of Origin: Made in India
• Brand: AMRUT ENERGY
• Model Name/Number: 1HP160
• Motor Phase: Three phase
• Packaging Details: Corrugated paper packaging.

Emerge Solar Pumping System consists of solar pumping inverter, pump and PV array. Consider that storing water is more efficient than storing electricity, the system is designed to directly drive the pump without battery which can reduce the construction and operating cost and routine maintenance effectively.The PV array consists of multiple solar panels connected in series/parallel, which can supply the whole system as power source by converting the absorbed solar radiation energy to the electrical energy.Solar pumping inverter can implement the control of the whole system operation, which drives the pump by converting DC power produced by the PV array to AC power. This inverter can adjust the output frequency according to the solar irradiation intensity in real time to implement the MPPT (maximum power point tracking).The pump driven by a 3-phase AC motor draws water from deep-well, river, lake, etc. and pumped into water tank/pool, or directly connected to the irrigation system or fountain system. All of centrifugal pump, axial-flow pump, mixed-flow pump, and deep-well pump can be utilized.   Our Solar Pump Inverter LCD display, easy to operate Solar pump system= solar panels + solar pump inverter + AC pump. No need battery. (Water storage replaces power storage) it can reduce system cost and maintenance costs. As we all known, the start current of motor is great, our solar pump inverter have Soft start function (Slow start, Slow to stop,) no surge current / (no impact current). Solar pump inverter can protect the pump. It has the complete electric protective functions. And it can choose detection of water level and Control Circuit to prevent overflow and no water. The most important is solar pump inverter having MPPT function (maximum power point tracking); according to the sunlight intensity, solar pump inverter adjusts the output frequency automatically to achieve maximum power point tracking etc. It can work 24 hours, because our inverter can connect AC city power. Solar pump inverter controls and adjusts the working of solar pump system. Solar pump inverter converts DC power produced by solar panels to AC power.AC water pump is driven by three phase solar pump inverter. Patented MPPT algorithm Up to 98% conversion rate Intelligent power module, fully automatic, complete protection, 8 years data storage No energy storage or batteries required Driving the pump directly, high reliability, greatly reduce construction and maintenance expenses Fully compatible with pumps Full coverage (0.37-55kW)   Detailed Product Description High efficiency>98% Variable frequency Soft start function Protections : Over voltage, under voltage, over heat, reverse polarity, Dry pumping, over flow, short-circuit Economical : matching with AC pump (AC pumps are less cost than DC pumps of same size and quality) No need battery and charger controller (store water instead of store energy into battery )

  MicroSun solar water pumping solutions provides solution to water supply which are cost effective and will enhance savings of your electricity expenses .   Highly efficient VFD will support the pump to lift the water from the source of body.  The pumping system is designed with Maximum Power Point Tracking (MPPT) to give the maximum output with the help of MicroSun solar panels.    The operation of solar powered pumps are more economical mainly due to lower operational and maintenance cost and has less environmental impact than pumps powered by an Internal Combustion Engine (ICE).

• Voltage: 230 V & 380 V
• Discharge Outlet Size: 32 mm to 100 mm
• Features: Easy installation, Longer working life, Quality tested.
• Rpm: 2850 RPM
• HP/KW: 2 HP/ 1.5 KW
• Size of Wire: 1*3 *1.5 SQ.MM
• Discharge in LPM: 1000 to 200 LPM

• Type: Wind Solar Hybrid System
• Application: Industrial, Power Station
• Type: Solar Plates
• Color: Black, Metallic, Silver
• Voltage: 110V, 220V
• Condition: New
• Automatic Grade: Automatic, Manual
• Power Source: Solar Power
• Blade Material: Easy To Oprate, Low Maintainance

The use of Solar PV module for water pumping is one of the most attractive applications due to several advantages. In general, a water pumping system consists of PV modules, motor, pump and storage tank. The Storage tank can be thought of as an energy storage media like batteries. Therefore, the use of batteries is not required for water pumping applications. Also, a DC motor can directly be coupled with Solar PV panel, avoiding the use of any inverter. An AC motor can also be used wither inverter, which converts DC to AC. Additionally a PV water pumping system can also have a maximum power point tracking (MPPT) device to match the PV module output impedance with that of motor to extract maximum power throughout the day.   Solar Pumping system can be easily integrated into the existing pumping system arrangement by using pump drives (VFD) in the arrangement.   Like off grid systems, a PV pumping system can be designed for sizes ranging from very small water pumping requirement for drinking water to large water volume requirement for irrigation purpose.

PV pump system constiuted with 4 parts : Solar array, PV pump inverter, Threephase AC pump and water storage device. The solar array absorbs the sunshine energy, converting the energy to electricity for the system power supply. PV pumping inverter converts DC voltage from the solar array into AC voltage to drive the pump. Pumping water from deep well, river, lake, etc. Then send water to the destination to meet our demand of water. And it could achieve the real-time outputting voltage and frequency regulation according to the change of sunshine, achieving the MPPT, maximizing the use of solar energy. The PV pump system, follow the low carbon, the energy conservation, the environmental protection concept, improve the living standard in water-deficient area. The market prospect and social value is great. Main Components of the Solar PV Power Generating System ●    Solar PV Array of required capcity to generate power ●    Solar Charge Controller Unit to regulate the power ●   A Battery Bank to store the power (not required for solar pumps) ●    High efficient power inverter to convert the DC to AC for powering conventional loads

• Type: Solar Pump
• Application: Cryogenic, Farm Irrigation, Sewage, Submersible
• Voltage: 220V, 380V, 440V
• Automatic Grade: Automatic, Manual, Semi Automatic
• Power: 1-3kv, 3-5kv, 5-9kv
• Pressure: High Pressure, Low Pressure, Medium Pressure