Solar Water Heating System
A Solar Water Heater is a device which provides hot water for bathing, washing, cleaning, etc. using solar energy. It is generally installed at the terrace or where sunlight is available and heats water during day time which is stored in an insulated storage tank for use when required in the mornings. Solar Water Heating Systems saves money for the users. A 100 liter per day capacity system suitable for 3 - 4 people can save upto 1500 units of electricity in a year, depending on hot water used. It can also save around 140 liters of diesel in an establishment using oil fired boiler besides reducing green house gas emissions in the atmosphere. Higher capacity systems will save higher amount of electricity/fuel oil besides reducing higher amount of GHG emissions.
Solar Water Heating System
The FLAT PLATE collector absorbs the solar energy and converts it into heat energy. The cold water flowing through the riser pipes gets heated and moves into insulated storage tank through header pipe, due to low density of hot water it occupies the upper portion of the insulated storage tank and the cycle continues as long as the sun rays fall on the collector. By the end of the day the entire tank is with hot water. As the storage tank is insulated which retains heat overnight. In this principle water can reach temperature up to 600c – 850c. Specifications: COLLECTOR BOX Collector Size : 2030 x 1030 x 100 mm Collector Box : Extruded Aluminium, make – Indal / Jindal Grade – HE9T/HE9WP Finish : powder Coating Glass Retaining Angle : Extruded Aluminium as above Back Sheet : 22SWG, Aluminium, Revited and sealed with silicone sealed/ Galvanized sheet as per IS Glass : 4mm, toughened, low Iron content with 85% minimum transmitivity Glass/beeding/Sealing : EPDM with 35% rubber content along with the top Aluminium retainer angle, using SS self tapping Screws Grommets : EPDM with Inside / outside locking collar Ends Connections : 4mm thick brass flages with EPDM gaskets Insulations : 48kg/ cu.m density rockwool/ puff Bottom – 50mm and Sides – 25mm Reflective Foll : Aluminium – 100 microns for sides, 50 microns for bottom Frame Corners : Sealed from inside with Silicone Sealant and Provision of Corner Clips for better aesthetics and prevantion of moisture entry ABSORBER Coating: Selective Bonding between Fins and Riser: Block Chrome – NALSUN Absorptivity > 0.95 Emmissivity : < 0.15 Ultrasonic Welding / Lead and Tin Soldering Bonding btw Header and Riser : Metallurgical bonding using 14% Silver Brazing rod Absorber Area : 2.07 sq.m Fins : 99.9% + -0.01 Copper – 120 mm wide, 36 SWG Number of Fins : 09 (Nine) Test Pressure : 5.0 kg/sq.cm Header : 99.9% + -0.01 Copper -1” x22 SWG Riser : 99.9% + -0.01 Copper-1/2 x22 SWG System Temperature : 60o C - 85oC STORAGE TANK Inner Storage Tank : SS 304 Grade with TIG Welding Inter Connecting Pipes : SS 304 Grade End covers : Powder Coated pressed Aluminium dishes Insulation : 100 mm Rinsine bonded Rockwool Tank Outer Cladding : SS mirror finishing/ Powder Coated Aluminium with optional Colours Features: ISI marked 1.5 KW back-up heater with Thermostat(optional) All fasteners are made of SUS 304 Food grade for rust free. No scaling formation will be occurred by using salt and hard water in ETC systems. Compressed PUF, insulated storage tank to retain the hot water for more than 48 hours. Auxillary tank is fitted instead of air vent, withstands high cold water pressure also minimize mixing of hot water and cold Strong, polyester powder coated, rust free metal frame and laminated outer tank. Air tight silicon 0 Rings avoid hot water leakage due to high temperature. High quality, tested and tough/ borosilicate glass tubes. Easy Maintenance & round the clock service facility with Dealer network and service centers all over India (Goa, Karnataka, Andra Pradesh, Tamil Nadu, Maharashtra - Kolapur, Jaipur).
High Efficiency 1KV Solar Energy System
Let’s just enjoy eco-friendly way of living and fulfill our responsibilities towards environment! We are a well-known name as Exporter and Supplier of High Efficiency 1KV Solar Energy System from Karnataka, India. We are eminent in bringing forth preeminent quality Solar Energy System to all our worthy buyers. We offer a wide gamut of High Efficiency Solar Energy System that is performance as well as result oriented. One can purchase it from us at the modest prices.
Solar Hybrid System
224,000 - 225,000 Per Piece
Type : Solar Hybrid System
Application : Industrial, Power Station
Type : Solar Plates
Color : Black, Grey, Metallic, Silver
Voltage : 110V, 220V, 380V, 440V
Condition : New
Automatic Grade : Automatic, Manual, Semi Automatic
Blade Material : Easy To Oprate, Low Maintainance, Low Voltage Indication
Off Grid Solar System
Brand : Havells
Warranty : 2 year
Battery Charging : Intelligent battery charging -3 Stage(Bulk,Absorption&Float) Charging for enhanced battery life
Power : 1KW-10KW
Solar Home Lighting Systems
Bright light wherever you need it Long usage time: 4 hours on 7W PLS lamp (8000 hours); 48 hours on built-in LED flashlight.Fast charging: Only 6 hours to recharge 6V 4.5Ah SLA battery.Light direction: Lamp holder can swivel 180 degrees; special cover is included for task lighting purposes.Solar charging: 5W polycrystalline silicon solar panel.Extra safe: Overcharging and deep-discharge protection.Portable use: Contains hand grip.Lantern housing material: Environmentally-friendly ABS.
Solar Water Heating Systems