Splitter Dealers in Bangalore

Eloquent Hydraulic Core Splitter was developed to support mineral exploration and geotechnical companies that analyze drill core samples for AQ,BQ,PQ,NQ,and HQ taken from diamond coring through exploration core drill from earth. The Eloquent Hydraulic Core Splitter uses electric drive hydraulic power pack creates hydraulic crushing force on the core sample. The ram end is attched with a special heat-treated, hardened steel blades and V blaock to locate the core samples to split,a core sample of around up to 200 mm long can be taken and then split in half.

• Size :: 10 to 50mm ;
• Wavelength range :: 400 - 1100nm;

Nd: YAG laser can have second and third harmonics. These three harmonics are useful in scientific community. When an optical system uses these harmonics, they need to combineseparate at the detector plane. A dichroic beamsplitter coating can be used to serve the purpose.

• Warranty: 1 Year
• Condition: New
• Color: Black
• Packing: Colour Box
• Operating Temperature Range: -15 to +55℃
• Support: 1080p 3D

• Type No: SI 3W SP 000
• Frequency Range(MHz): 820 - 2500 MHz
• VSWR: 1.3:1 Max
• Impedance: 50 Ohms
• Insertion Loss: < 5 dB
• Termination: N - Female
• Total Input Power Rating: 150 Watts
• Dimension (mm/inch): 201×43×25mm/7.9"×1.7"×1
• Weight(Kgs/lbs): 0.38 kgs / 0.9 lbs Approx
• Packing Size (mm/inch): 215 ×50×35mm / 9"× 2" × 2"
• Housing Material: Aluminium
• Inner Conductor Material: Brass

• Material: Brass, Copper, Frp, Plastic, Porcelain, Resin, Rubber, Silicone Rubber, Stainless Steel
• Certification: CE Certified, ISI Certified
• Application: Automotive Industry, Electricals, Electronic Device, Home, Offices, Wire
• Color: Brown, Creamy, Dark Brown, Grey, Ivory, Light Grey, Off White, White
• Condition: New, Used
• Frequency: 50Hz, 60Hz
• Feature: Easy To Connect, Electrical Porcelain, Four Times Stronger, Proper Working, Shocked Proof, Sturdy Construction, Superior Finish, Water Proof
• Warranty: 1year, 2years, 5years
• Spliting Style: Double, Multiple, Tripple

The SEM Model 200 disintegrator has been evaluated by NSA and with the standard 3/32" screen, meets the requirements of NSA/CSS specification 02-02, high security disintegrators for paper and NSA/CSS 04-02, optical media destruction devices. This SEM disintegrator has been designed to accommodate materials typically not acceptable to a standard paper shredder. With thruput rates up to 100 lbs/hr., this unit is NSA approved for the destruction of all levels of classified paper documents and optical media (CDs/DVDs). With an optional 5/64" screen, the Model 200 disintegrator is also NSA/CSS 04-01 approved for punch/key tape destruction. This disintegrator also has the flexibility to destroy a variety of media (including USB thumb drive) and/or other items to privacy act (unclassified) level destruction such as: Blue Ray disks, ID badges, key access cards, microfilm, CD rom view graphs, floppy discs, audio cassettes, plastic credit cards, etc. The completely enclosed sound proofed sleek designed black and silver cabinets surrounding both the destruction chamber and the waste collection system have helped to reduce noise levels to the 72 to 78 dBa range. The 35 gallon waste collection bag system also makes the Model 200 the largest collection system in it's class helping increase productivity due to less bag changes.

• Warranty: 1 Year
• Connector Type: SMA Connector
• Frequency Range: GPS
• Impedance: 50 ohm
• Number Of Ways: 16

• Usage/Application: Domestic Use
• Packaging Size: 500ml
• Brand Name: Rustolene
• Shelf Life: 24 Months
• Form: Liquid

• Frequency: 690-2700MHz
• Country of Origin: Made in India
• Color: Black
• Power: 100W (Average Per Port)
• Model Name/Number: VSW-2PS-F7-3.8
• Brand: Vinsur
• Connector Type: N-female
• Usage/Application: Indoor
• Frequency Range: 690-3800MHz
• Impedance: 50 ohm
• Operating Temperature: -30

• Type: Hdmi Splitter
• Material: Brass, Copper, Frp, Plastic, Porcelain, Resin, Rubber, Silicone Rubber, Stainless Steel
• Certification: CE Certified
• Application: Automotive Industry, Electricals, Electronic Device, Home, Offices
• Color: Brown, Dark Brown
• Condition: New, Used
• Frequency: 50Hz, 60Hz
• Feature: Easy To Connect, Electrical Porcelain, Four Times Stronger, Proper Working, Shocked Proof, Sturdy Construction, Superior Finish
• Warranty: 1year
• Spliting Style: Double, Multiple, Tripple

• Return loss: The return loss of Tele port and line port against 600 Ohms is 200Hz -3400Hz = 12 dB
• Insertion Loss: The tele-port to Line port insertion loss is < 1 db at 1 KHz for 600 Ohms.
• Isolation: Isolation resistance between tip, ring and between earth = 10 Mega-ohms. Isolation resistance with line port = 10 Mega-ohms.
• Delay distortion: The delay distortion caused by POTS splitter is as follows:From 0.6 -3.2 kHz delay distortion is 200 microseconds.From 0.2 - 4.0kHz delays distortion is 250 microseconds.
• Longitudinal balance of POTS splitter: The balance is greater than 58 dB for frequency between 200 Hz - 1 kHz with a straight line-level decreasing to 53 dB at 3 kHz.
• Unbalance about earth :: 25Hz-50 Hz > 40 db terminated with 600hms.50Hz- 600 Hz > 46 db terminated with 600 Ohms.600Hz-3400Hz > 52db terminated with 600ohms.
• Connectors PSTN Line: The PSTN line is the PIJF cable with 0.5 copper pairs.
• Longitudinal balance: The longitudinal balance at ATU-C and ATU-R is greater than 40 dB over the 5 kHz to 1104 kHz frequency range.•DC characteristics
• ADSL-band attenuation: The insertion loss of low-pass filter is greater than 65dB at CO POTS and 70dB in remote POTS for frequencies ranging from 25 to 300 KHz with an input level of 10dBm. For frequencies ranging from 300 kHz to 1104 kHz, the attenuation is greater than 55dB f
• ADSL-band Return Loss: The return loss caused by loading the low-pass filter in the band from 25 kHz to 1104 kHz against the reference impedance of 100 ohms is greater than 14dB.
• Metering Pulse: The metering pulse after passing through DSLAM is available at the interface with frequency 16 KHz ± 1%. The distortion is not more than 10% and the level is minimum 500 mV rms ± 10%. The interface will work independent of polarity reversal.
• Loop Current: The maximum loop current drawn from exchange is less than 60 mA.
• The ringing voltage: Generated / detected at the subscriber unit is at least 40 V rms with frequency as 25 +/ - 3Hz. The Ringing voltage is generated by the DSLAM is 75V rms with frequency as 25 + / - 3Hz
• Signal Power: Maximum peak signal power in 200-4000Hz is <3dbm. Loop current is <63mA.

• Material: PVC
• Color: Yellow
• Packaging Size: Box
• Directivity: 55 dB
• Loss Uniformity: 0.4 dB
• Operating Temperature: -40 to 85 degree C
• Operating Wavelength: 1260 to 1650 nm
• Insertion Loss: 3.8/4.0 dB

din India Stereo Head Phone Amplifier is capable of boosting the audio output up to 5 times, with less then 0.3% distortion when delivering 2.3 watts per channel at 32 ohms load. Our Amplifier is capable of handling audio band from 20 Hz to 20 KHz.

This product is widely used in Chinese herbal medicine shops and hospitals for all kinds of grains crushing and herbal medicine processing, such as in capsules, pills, powder and troche making etc. 1.Excellent air-tightness, stable performance, continuous working time, time and cost saving. 2.Casting steel grinding system, which is durable and efficient. 3.Convenient to clean, easy to operate, and reliable.

Aeon Telectronics Pvt Ltd as part of its ongoing expansion has developed and added the Splitter to it product portfolio. A Splitter is a small device, which is used in the broadband network along with DSL modem at the customer premisesThe Splitter when connected to the existing phone line separate the voice signal from high-speed data, and the connection to the internet is direct. The Splitter has 1 input port where in the incoming telephone line is terminated, and 2-output port - one port is connected to the telephone instrument, and the other ports connected to the MODEM. This in turn helps the subscriber to have direct connection to the internet thus eliminating the typical delays due to busy signals connection time. It also allows the subscriber to take a voice call and browse the internet all at the same time.

Fiber PLC Splitter Optical Distribution Frame (ODF) Fibre Distribution Unit (FDU) Fibre Termination Box (FTB) Outdoor D SLAM Cabinet Indoor D SLAM Cabinet Outdoor ONU Cabinet Outdoor PSTN Cabinet FTTH ONU Box FTTH Fiber Socket Optical Distribution Box Optical Distribution Cabinet Optical Indoor Cable Patchcord & Pigtail of G.657 A Fiber Joint Closure

2 simultaneous HDMI outputs Support Hot-plug Support HDMI2.0& HDCP2.2 and is backwards compatible with all previous HDMI standards The highest resolution is up to 4Kx2K@60Hz 4:4:4 Transmit 4Kx2K signal for 10m via AWG24 HDMI cable High bandwidth: 18Gbps Auto-identify input resolution Support EDID management, automatically adopt the resolution of the first detected display from port 1~2 Intuitive indicator for connection status& input HDCP compliance status Convenient online firmware update

These are several classes of devices that can be used to divide (or) combine RF and microwave power. Generally, they are classified according to the number of output ports and the relative phase difference between the output signals. The Power Splitter is an appropriate device carefully selected based on the device type and specifications. Moreover, we are listed amidst the well-reputed Power Cord Splitter Exporters and Suppliers in India. Particular care must be taken in specifying DC Power Splitter where the application calls for power combining. When specifying a power splitter, the system designer must consider key parameters namely, frequency range, number of outputs, amplitude balance, phase balance, isolation internal power dissipations. Devices Types These devices deliver output signal in – phase with each other. The most common types are 2, 4, 6, 8 and 16 way dividers. Odd – numbered power division circuits, by design, have a narrower bandwidth. The following table Contains number of output and corresponding coupling loss.

• Categories: Office Automation, POE, Powerline, Splitter/Injectors Etc.

Used to install a non-PoE device in remote locations Splits a networked PoE signal into separate power and Gigabit data sources Set the output power to either 5V, 7.5V, 9V, or 12V

HDMI Splitter, Gold Home Cinema, television wall mount, 3d glass

Cavity Power Splitter, RF Antenna, cellular antennas, cell phone antenna

Cavity Splitters, band pass filters, Rgb flood lights, LED Lanterns

Rock Splitters, Rock Breaker Front Heads, repair, maintenance

antenna splitter, Power Splitter

Disintegrators, Ball Mills, ball mill unit, batch ball mills

UTP Cable Splitter, Cat6 UTP Inline Coupler, Fiber Optics, fiber patch cord

Ratio Fiber Splitter, fiber optic patch panel

Splitters, Antennas, Couplers

drum splitter, Rotogravure Printing Machine, lamination coating plant