Static Meter Dealers in Bangalore

• Type: Meters
• Application: Industrial, Laboratory
• Voltage: 9V
• Display Type: Digital
• Power Source: Battery
• Warranty: 1Years

The Static Charge Meter Z205 is a non-contact, light weight digital instrument designed to measure static voltages on objects & surfaces. It features a large LCD display to indicate the magnitude and polarity of the electrostatic charge directly in Kilovolts. The special circuitry enables repeated and drift-free measurements without continual re-zeroing. The instrument has good directional sensitivity and is ideal for measuring electric charges encountered in critical electronic assembly and storage areas as well as Antistatic Work Stations. It can also be used for Plastics, Paper, Textiles, Food, explosives and Pharmaceutical Industries. The unit gives direct readings of electrostatic potentials on any surface, when held at a distance of 5 cms. However, higher electrostatic potentials can be measured by proportionately increasing the distance from the meter to the charged object. The use of very low current circuitry results in a long battery life of over 6 months under normal use.

• Dimension: 143mm x 81mm x 25mm (H x W x D)
• Construction: Moulded plastic case, integral battery compartment, external earth connection
• Weight: 200g
• Measurement range: -200kV to 200kV at a distance of 150mm
• Accuracy: +/-5%

The Model 983v2 Static Locator provides accurate measurement of electrostatic charges. Its design enables fast response, low drift and ease of operation. The 983v2 can operate in “Continuous” or “Peak Hold” mode to record changes in the level of charge or the highest charge detected respectively. It is suitable for use by production, maintenance, inspection and quality engineers and on any material where static charge may be an issue.   Features & Benefits Compact design Lightweight, pocket sized device Large high contrast LCD screen with digital display Easy to read in different lighting conditions Continuous and Peak Hold modes Can measure fluctuation in charge levels and/or the highest level detected In-built distance meter Clear indication of correct operating range for consistent, accurate readings Robust plastic housing High durability Instrument case Safe, clean storage when not in use    

The output signal from the Valstat® SM20 online electrostatic charge sensors ( minimum 1, maximum 18 sensors) can be connected to one or more colour touch panel HMIs for remote or local continuous monitoring and analytics. The collected data is monitored and when the measured value exceeds the measurement range or a pre-set safety level, an alarm sounded. The collected data can be stored, retrieved and analysed. Distinct from a hand-held meter that is used to periodically measure static charges, the Valstat® SM20 is permanently fixed at the location where the target is to be monitored. Hence, variations in measurement due to different operators, location, and distance are completely eliminated. As a result, a real-time, accurate, and continuous signal proportional to the static charge is made available for further analytics and diagnostics. The discharge or neutralising effect of the static charge eliminator is efficiently monitored for continual safety, and preventive maintenance. Expensive man-hours for inspection, testing, and validation are also effectively reduced.

static charge meter, electronics equipment, Solder Pot

digital static multifunction meter, Voltage Vacuum Contactor