Stepper Motors Dealers in Bangalore

We are offering tca3727 2-phase stepper-motor driver. Features: • 2 x 0.75 amp. 50 v outputs. • integrated driver, control logic and current control(chopper). • fast free-wheeling diodes. • max. Supply voltage 52 v. • outputs free of crossover current. • offset-phase turn-on of output stages. • z-diode for logic supply. • low standby-current drain. • full, half, quarter, mini step.

• Finishing: Polished
• Warranty: No Warranty
• Country of Origin: India
• Motor Type: Bipolor
• Current: 801-1200 mA
• No. of Phase: 2
• Voltage: 4 V
• Torque: <10 Kgcm
• Step Angle: 1.8 Degree
• Brand Name: SKS Store
• Dimensionv: 42 mm x 42 mm x 33 mm
• Model: Nema 17
• Current / Phase: 0.95 A
• # of Leads: 4
• Nett Weight: 220 Grams
• Shaft Length: 24 mm

• Country of Origin: India
• Color: Black
• Brand Name: Em Motion Modules
• Input Phase :: 20-70VDC
• Operating voltage: 5V

Stepper Motor: A stepper motor is an electro mechanical device which converts electrical pulses into discrete mechanical movements. The shaft or spindle of a stepper motor rotates in discrete step increments when electrical command pulses are applied to it in the proper sequence. 2 phase and 4 phase motors with NEMA 8 to NEMA 42 dimensions are available. DC Motor: A DC motor in simple words is a device that converts electrical energy (direct current system) into mechanical energy. we offer 3-watts to 240-watts with the speed of 2 - 215RPM motors are available with us. Rated torque 140 kgf cm available BLDC Motors: DC brushless motors are electric 3-phase motors with Hall sensors. We offer power range up to 52 watts to 660W output with the rpm of 3000 to 4000 RPM. Rated torque from 1 to 21kgf cm.

• Brand Name: Oriental Motor co., ltd., Japan
• Place of Origin: Japan

Essence is the authorized sales partner distributors in INDIA for Oriental Motor Co., Ltd-Japan make, Motion Control Systems, we offer you a broad range of fully integrated product level with all AC Motors & Geared Motors, Variable Speed Control Systems, Stepper Motors & Driver Systems, Brushless DC (BLDC) Motors, Actuators, Cooling Fans, Centrifugal Blowers, Gear Units and Couplings with a full lifecycle perspective for the entire drive technology.

Our organization is very well known in offering used and refurbished precision electronic components. These items are in good condition pulled out from old machineries, which is fully operational and functions as intended. This item may have some signs of cosmetic wear. The item may be a floor model, store return, factory second or a new unused item. This Items has been professionally restored to working order, this means the product has been inspected, cleaned, and repaired to meet the specifications and functions as intended and is in excellent condition, Which is not approved by the manufacturer. The item will not be in its original packing. This item is guaranteed. You may qualify for a refund if it does not perform as described above.   Details :   Stepper Motor : NMB -PM35S-048-HPK2 Encoder : Avago Technologies - HEDS-5500 I02 Description PM35S-048-HPK2   Step Angle : 7.50 deg Frame Size : 35 mm Max Holding Torque : 20 mNm Steps per Rotation : 48 Drive Voltage : 24 V Drive Circuit : Unipolar Insulation Resistance : 100 Dielectric Strength : 500 Class of Insulation :  E Operating Temperature : -10 ~ +50 Storage Temperature : -30 ~ +80 Operating Humidity : 20 ~ 90 RH Standard : No  Encoder Description (HEDS-5500 I02)   Manufacturer : Avago Technologies Product Category : Encoders Type : Incremental Pulses per Revolution :  512 CPR Number of Channels : 2 Mounting Style : Screw Termination Style : Solder Pin Output : Quadrature with Index Supply Voltage : 5 V Operating Temperature Range : - 40 C to + 100 C   Magnet Material : Nd-Fe-B bounded magnet Ferrite plasic magnet Polar anisotropy ferrite sintered magnet   Technical Specifications   Drive Circuit Uni-polar Bi-polar Coil Resistance 50 Ohms 7 Ohms Drive IC 2SC3346 UDN2916B-V

Stepper motor step angle is usually defined with parameters or a number of steps, the general motor revolution is divided into 200 steps, which is the step angle of 1.8 degrees, EasyDriver subdivision function with a step, this driver board subdivision 8 segments, that is, each step of the motor is subdivided into 8 small step, this can be more precise control, ie EasyDriver to 1600 steps to complete a full 360 degree rotation.

• Voltage: 5V.
• Color: Silver
• Diameter: 27mm.
• Step angle: 5.625 x 1/64.
• Reduction ratio: 1/64.
• Item size: 31*27*19mm
• Net weight: 35g

We are offering stepper motors. stepping motors can be used to achieve highly accurate positioning operation via digital control; the motor operates by accurately synchronizing with the pulse signal output from the controller to the driver. Stepping motors feature high torque and low vibration at low-speeds, which is ideal for applications requiring quick positioning in short distance. stepping motor and driver packages  ac power supply input  dc power supply input 5-phase stepping motor and driver packages  ac power supply input  dc power supply input 2-phase stepping motor and driver packages  ac power supply input  dc power supply input • 2-phase stepping motors • 5-phase stepping motors accessories  cable, flexible coupling, motor mounting bracket, etc., controllers stepping motors require a controller (pulse generator) that issues operation commands. We offer controllers that allow you to fully utilize the characteristics of stepping motors. • stored-program type • stored-date type • accessories

• Application: Regular
• Motor Type: Unipolor
• Phase: Three Phase
• Application: For Molybdenum Wire Cut Machine
• Model Number: 45BF003
• Type Of Part: Steper Motor

• 2phase.5phase motor: Compact design and light weight with high accuracy, speed and torque
• Brake □60mm, □85mm of shaft type for compact equipment (AK-B Series): Cost-effective

We are offering stepper motor. stepping motors convert electricity into rotation. And it can be very accurately controlled in terms of how far it will rotate and how fast. Step motors are so named because each pulse of electricity turns the motor one step. Step motors are controlled by a driver, which sends the pulses into the motor causing it to turn. The number of pulses the motor turns is equal to the number of pulses fed into the driver. The motor will spin at a rate that is equal to the frequency of those same pulses. Autonics wide range of 2 & 5 phase stepping motors promise ultra precise, reliable operation and control of the industrial equipment like smt for semiconductors, office & computer related equipment, medical equipment and so on.

• White connector: for connection motor.
• Female Power connector: for connect 5V and 12V-24V power.
• Interface: direction, enable, speed
• Features: Has a thermal extinguishing circuit,Ground connection protection,3 keys for micro-stepping

• Phase: Single Phase
• Brand Name: Oriental Motor
• Frequency: 50/60Hz
• Feature: High Efficiency, Easy Wiring, Compact and High Torque
• Power Supply: 100-120VAC
• Rotor Inertia J: 30x10
• Power Supply: 24VDC +/- 5% 0.2A
•  Current: 2.1 A
• Mass Control Circuit: 0.8 Kg
• Basic Step Angle: 0.72 Degree
•  :  
•  :  

• Phase: 5
• Type: Stepper Motor
• Holding Torque: 0.13
• Step Angle: 0.9 Degree, 1.8 Degree, 0.72, 3.7 Degree

Our organization specializes in providing a comprehensive range of x-y stepper motor (table) to our clients, which is especially designed to provide movement in two axes. Our range of x-y stepper motor (table) built using multiple hepco linear actuators and is well known for user friendly nature.

• Brand Name: SCHNEIDER
• Type: STEPPER MOTOR BERGER VRDM3910/50LWB
• PART NO: BRS39AW370FBA
• ENCODER: KENDRION 7643108H07 24VDC E153966/173 ENCODER
• BASE RPM: 1000
• CONTRY OF ORIGEN: GERMANY

• Step Angle: 0.9 Degree
• Speed: 3000 RPM
• Motor Type: Stepper
• Torque: 0.41-0.60 mNm
• Power: 150 W
• Current: 100 mA
• Frequency: 50 Hz
• No Of Phase: 1
• Of Leads: 4 Wire
• Supply Voltage: 240V

• Phase: Single Phase
• Motor Voltage: 70 VDC
• Min Torque: 0.07 Nm (0.05 ft.lb)
• Max Torque: 2.4 Nm (1.77 ft.lb)

• No. of Phase: 2
• Step Angle: 1.8 Degree
• Voltage: 2.4
• Torque: <10 Kgcm