Testing Equipment Dealers in Basavanagudi, Bangalore

• Display: Digital
• Weight: 64 g
• Active Mode: 0.00% - 4.00 g / 1 BAC
• Reading time: about 100 seconds
• Detection area: 0.00 - 2.00 g

• Features: Quality approved, Accurate dimension, Rugged design

EMS-11: Measurement of current parameters (L-N) *CT primary and secondary programmable. EMS-12: Measurement of voltage parameters *PT primary and secondary programmable. EMS-13: Measurement of frequency parameter. EMS-14: Measurement of Power Factor parameter. EMS-02: Measurement of basic parameters.(Current (L-N), Voltage (L-N),(L-L), frequency (average) and Power factor (Total) * CT ratio programmable, RS485 Mod-bus RTU protocol available, Sensing : True RMS. EMS-18: VAF Meter with True RMS Sensing. Program can be locked by removing short link connected across specified terminals. Hold/Scroll Facility available .

5 Digit LCD Display. Start signal- continuous, 12V AC to 240V AC, 12V DC to 220V DC. Battery operated. Reset terminal available at rear for resetting. Resolution- 1Hr (1 sec if min: sec button on front panel is pressed.). Source voltage : 3 VDC (2 x 1.5 V) “AA” size battery operated. Time Range: 0 hr to 99999 hrs.

Equinox Disposable Temperature Data logger Applications : - Record Time & Temperature for Vaccines Biologicals Pharmaceuticals & other perishable Temperature sensitive products Model : EQ-88182

• Type: Ph Meter
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White
• Display Type: Digital
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric

• Display: LCD Display
• • Measuring Range: 0 to 100 digits
• • Dimension: 200 X 35 X 35
• • Weight: 190gms
• • Power Supply: 9VDC Batteries

Electronic Structural Moisture Indicator using a Patented technique based on the dielectric constant / high frequency measuring principle. The indicator is equipped with a digital LCD readout and a universally applicable ball sensor for non-destructive location of moisture concentration in all kinds of building materials as well as for assessment of moisture distribution in walls, floors and ceilings. Handy rapid-action moisture indicator in pocket size for fast single and series. Ideal pre-tester for use with all moisture analyzers using the carbide method. Features :  •  No Separate Measuring Electrodes or Cables required.•  Ideal pre-tester for use with all moisture analyzers using the carbide method.•  Fully Automatic Adjustment of the Indicator.•  Rechargeable Battery.•  Handy rapid-action moisture indicator in pocket size for fast single and series measurements.  

• Frequency Meter: Digital Frequency Meters

Voltmeters: 3-Phase 3-line 3-digit display Voltmeter, 1-Phase 3-12 digit AC Voltmeter, DC Volt and Ammeter(DCVA), 3-12 digit DC voltmeter. Ammeters: 3-Phase 3-line 3-digit display Ammeter, 1-Phase 3-12 digit AC Ammeter, 3-12 digit DC Ammeter

Electronic Pressure Decay Air Leak Testers. The Pressure Decay Leak Tester is housed in an ABS box with red LED display on the front. We use an imported Pressure Transducer which is the heart of the Leak testing Unit. Besides the Pressure Transducer, the complete design, development and manufacture of Electronics including software are carried out in house. From simple Leak testing application to complicated Leak cum assembly Testing Units inclusive of pneumatics and fixtures can be supplied. We use the best of pneumatic and sealing components available in the world for integration and control purposes. In addition to testing of components for air leakages, we also manufacture systems to work under Vacuum and a combination of pressure and vacuum.

6 Channel System – Four Strain Gage Inputs and Two Amplified Transducers Inputs. Accepts Quarter Bridge, Half Bridge and Full Bridge Strain Gage Configurations. System has built in circuitry for 120 Ohms, 350 Ohms and 1000 Ohms, Quarter and Half Bridge Strain Gage Configurations. Simultaneous Display of all 6 Channels in Microstrain or user defined Engineering Units. On Line Graphical Display of any One Channel. Peak Hold – Max Min for all Channels. Selectable Display of Channels.

• RANGE: 20,35 KHZ-40KHZ.

Ultrasonic assembly is the method of choice for many applications in the automotive, appliance, medical, textile, packaging, toy and electronics markets, among others. The basic advantages of ultrasonic assembly - fast, strong, clean and reliable welds - are common to all markets. However, each market has specialised needs that they rely on ultrasonic assembly to meet.

oil testing equipments, fluid testing equipments, industrial fluid testing

Functionality of a product is considered as a matter  of course, so the perception of quality is determinedprimarily by the visual appearance. Damage to a surface by the human hand is one of the main reason for disturbance of the products quality perception. The hand abrasion is a very complex chemical and mechanical combination. By touching a surface the human hand performs a mechanical strike followed by a push-slide force. The human hand consists of a visco elastic material containing a rough and structured surface. In addition, sweat or hand cream creates a severe chemical environment.   TRIBOTOUCH The TRIBOTOUCH instrument is designed to do real life testing of finished products or lab samples in regards of resistance to hand abrasion. The set-up of the TRIBOTOUCH is exactly reproducing the complex chemo mechanical system of the human hand abrasion according to international standards. The flexible design of the TRIBOTOUCH allows various options and delivers reproducible results.

• Brand Name: Dwyer
• Features: Optional bright LED display, Easy push button set-up, Compact housing, Digital filter for signal damping
• Model Name/Number: Series 641
• Service: Clean air and compatible, non-combustible gases
• Weight: 12.6 oz (357.2 g).
• Loop Resistance: 600 Q max
• Current Consumption: 300 mA max
• Electrical Connections: Screw terminal
• Process Connections: 1/2" male NPT

• Voltage: 90V to 275V AC/DC
• Size: 96mm x 96mm x 45mm.
• Accuracy: 1.0% of FSD
• Panel cutout size: 92mm x 92mm
• Auxiliary: 90V to 275V AC/DC

Magnetic Stirrers Ultrasonic Baths Conductivity Meter

Rockwell hardness tester, The most practical, robost true Automatic Micro Hardness Tester in the market. Clemex CMT can make the Case Depth measurement or hardness profile study automatic hence increasing throughput and accuracy. This system travels to the location of sample at an accuracy of less than 1 micro, it indents, then makes autofocusing and measures the indent, same time it polts the hardness graph and based on the cut off value calculates the case depth value. Also you can position the indent very precisely at the phase to evalue the microstructure phases and many more. The user friendly system makes the system simple to operate and very practical. Clemex CMT is one of the very few practical automatic Micro Hardness Tester available in the market.

digital multi meters, clamp meters, high voltage indicator, Micro Ohm Meters

• Features: Capacitor withstand voltage, Electrical appliance insulation, AC voltage test, Neon bulb and lamp starting voltage.

magnetic particle testing equipments, crack detection