Testing Equipment Dealers in Hmt Layout, Bangalore

• Accuracy: ±2%
• Accuracy: ±2%
• Accuracy: ±0.8%
• Accuracy: ±1.2%
• Display: 4 Digits EXTRA LARGE Backlit Dual LCD Display
• Earth Resistance Range: 0 - 10/100/1000 Ohms
• Low Resistance Range: 0 - 200 k.Ohms
• DC Voltage: 0 - 1000V
• AC Voltage: 0 - 750V

• Brand Name: BIOBASE
• Weight: 4.5kg
• Application: Distinguish K value of gold, PT value of platinum, density value, purity percentage can be measured.
• Power: AC 110/220V , 50/60HZ
• Model Number: BK-DMG300K
• Place of Origin: CHINA

Features Distinguish K value of gold, PT value of platinum, density value, purity percentage can be measured. Pawning house, bank, jewelry shop, precious-metals recovery, jewelry factory, Gemstone Testing Center, precious metals researching, etc. Note: Unable to measure sample which is hollow or with inserted gems. Model BK-DMG300K BK-DMG600K BK-DMG900K BK-DMG1200K BK-DMG2000K Capacity 0.005-300g 0.005-600g 0.01-900g 0.01-1200g 0.01-2000g Density Resolution 0.001gcm3 Measuring Time 10-15 s Measuring Principle Archimedes principle Testing Board Unibody high-capacity plastic testing board

• Brand Name: Renown Systems
• Voltage: 240V
• Model Name/Number: RSDIC2040
• Frequency: 50-60Hz
• Body Material: Mild Steel
• Power Source: Electric

• Brand Name: Proceq
• Aperture Size: 2 x 25 cmSq
• Model Number: Pundit PL-200PE
• Bandwidth: 50 kHz
• IP Classification: IP 54
• Humidity: Less than 95% RH, non-condensing
• Operating Temperature: 0 - 40 Deg C
• Battery Lifetime: Greater Than 8 Hour
• Memory: 8 GB Flash memory, storage of up to 100,000 A-Scans
• Battery: Lithium Polymer, 3.6 V. 14.0 Ah
• Receiver Gain: 1X - 10,000X (0-80dB) 11 steps
• Pulse Voltage: 100 - 450 Vpp
• Display: 7

Details : Automatic Dielectric Constant Tan Delta & Resistivity Test Set –TDM 4000 The TDM-4000 is an automated instrument for measuring the electrical characteristics of transformer oil, insulating liquids & other insulating material samples. The TDM-4000 measures Capacitance, Dielectric Constant (Î), Dielectric Loss, Tan Delta (Dissipation Factor), Resistance & Resistivity of the test sample. The Tan Delta value gives an indication of the condition of the oil sample. There are several reasons due to which the Tan Delta value may be affected – such as moisture, dissolving of some of the transformer varnish, insulating material deteoriating etc. TDM-4000 is especially designed to work with the IEC & ASTM type oil cell with a 2mm spacing and will apply a stress in the range of 100-1200 volts per mm as recognized by ASTM and other specifications

To cater the ever-evolving needs of our customers, we bring forth the supreme muster of the RO Testers that is deeply appreciated for the flawless quality, user-friendly operations, efficient working and durability. Acquire the competitively-priced RO Testers from us in standard as well as the tailored configurations. We, hailing from Bangalore, are reckoned amidst the chief Manufacturers, Suppliers and Exporters of the RO Testers across the globe.

• Brand Name: Gaitsu
• Material: Stainless Steel
• Place Of Origin: Bangalore  
• Benefits: Easy to clean, Simple to use, Removes micron sized contaminants
• Ideal for: Carrying out inspection on any powder, granulate or liquids for ferrous & paramagnetic contamination
• Temprature: 80 deegree
• Size: 100,200,300 mm

GAITSU Magnetic Probe is a high intensity magnetic sampling probe that is ideal for carrying out inspection on any powder, granulate or liquids for ferrous and paramagnetic contamination. Also, it can be used for sample inspection of product at inward goods and at critical control points throughout the process line for batch testing. The Magnetic Probe that we offer is manufactured using stainless steel 304 that adds durability to it. It can work under temperature 80oC. We make available Magnetic Probe in different sizes such as 100, 200 and 300 mm.   Benefits : Easy to clean Simple to use Removes micron sized contaminants

• Feature: Rugged construction, Easy to install, High accuracy

• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Certification: CE Certified, ISO 9001:2008
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year, 2Years
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Brand Name: BIOBASE
• Place of Origin: CHINA

It is applicable to all petroleum products with flash points above 79℃ and below 400℃ except fuel oils. *it adopts special heating furnace to ensure the safety of test. *the instrument adopts desktop structure. Easy to operate. *stainless steel working table and furnace. *automatic open-cup flash point tester(only for bk-3536a) * lcd screen to display(only for bk-3536a) *automatically open the lid,detect the flash point and print test data.the test arm automatically rise up and lower down(only for bk-3536a)

• Brand Name: GW Instek
• Application: Laboratory
• Condition: New
• Display Type: Analog,Digital
• Grade: Manual
• Bandwidth: 500 MHz
• Rise Time: 700 ps
• Storage Depth: 200 Mpts/CH

• Brand Name: GW Instek
• Model: GDS 300/200
• Usage: Laboratory
• Sampling Rate: 500 MSa/s
• Waveform Capture Rate: 2000 wfms/s
• Dimensions: 115x180x40 mm
• Weight: 645.00 g

As the name clarifies, the flash point tester is ideal for finding out the flash as well as the fire point of different liquids. Made as per the standards of is/ip/bs/astm, etc., the flash point tester is appreciated for its optimum quality and sturdy construction. composition : open cup clevland :temp. Up to 400cclosed cup abbel :below ambient to 49cclosed cup pensky martentemp. 50c to 400c models available : manualautomaticsemi-automatic

• Weight: 115g
• Size: 30(H)x18(W)mm
• Operating Humidity: Humidity greater than 80
• Dimension: 165(L)x35(W)x32(H)mm
• Temperature Accuracy: 0.5 C
• Temperature Resolution: 0.1 C
• Condition Range: 0 to 1999uS or 0 to 19.99mS
• Condition Accuracy: +/-1%F.S +/- 1 digit
• Condition Resolution: 1uS or 0.01mS
• Temperature Range: 0 to 50.0 C
• ATC: Yes
• Operating Temperature: 0 to 50 C
• Storage Temperature: 0 to 60 C
• Storage Humidity: Humidity greater than 90%
• Battery: LR44 x 4pcs

• Accuracy: Better than +/- 0.1% of the range

Communication (RS 485RS232) with software up to 4 Alarms, 3 Inputs, IO.Common Independent Low & High Alarm relays for each channel.24VDC Power supply for 2 wire transmitters – on 3 channels. Advanced parameter protection function can be set to avoid any illegal operation. Flow integration with temp & Pressure compensation for steam & supersaturated steam.

• Type: Ph Meter
• Certification: ISO 9001:2008
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic, Manual
• Body Material: Copper, Plastic
• Power Source: Battery
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year

We supply dermatology equipments for medical Colleges & Hospitals.

We are offering roughness tester.zeiss make roughness tester portable and higher end equipment.

6th energy's AC Energy metering system uses customized AC energy meters with CT's. CTs can be mounted in existing ATS panels and external to the AC energy meter. The meters can be used for measuring all types of AC energy devices at site. Data captured is analyzed and presented in real time as well on a historical basis.

Description: MULTIPARAMETER TESTER Microprocessor based, Large dual Display LCD, double junction sensor, waterproof, ATC, Measures 5 parameters, pH, conductivity, temperature, salinity, & TDS, replaceable sensor, Auto calibration.pH: Range: 0.00 to 14.00pH, Resolution: 0.01pH, Accuracy: ± 0.01pHConductivity: Range: 0.0 to 199.9uS/cm, 200 to 1999uS/cm, 2.00 to20.00mS/cm, Resolution: 0.1 / 1.0uS/cm / 0.01mS/cm,Accuracy: ±1% full scale.TDS: Range: 0.0 to 99.9ppm / 100 to 999ppm / 1.00 to 10.00pptResolution: 0.1 / 1ppm / 0.01ppt, Accuracy : ± 1% of full scale.Salinity: Range: 0.0 to 99.9 ppm / 100 to 999ppm / 1.00 to 10.00ppt / 0.0 to1.00%, Resolution: 0.1 / 1ppm / 0.01ppt / 0.01%, Accuracy: ± 1% full scale.Temperature: 0 to 50.0°C, Resolution: 0.1°C, Accuracy: 0.5°C

• Usage/Application: Law Enforcement Agencies
• Brand Name: GANM
• Application: Workplace, Airlines, Railways, Clinical Use, Law Enforcement Agencies
• Country of Origin: Made in India
• Measurement Range: 0 - 550 mg/100ml
• Accuracy: + / - 5%
• Features: Heavy Duty, Sturdy Model - Professional Grade
• Display: LCD Display
• Type Of Mouthpiece: Replaceable
• Model Name/Number: Fuel-Cells Sensor Models
• Analyzing Time: 4 s
• Continuous Working Time: 12 hours
• Power Supply: AC Charger
• Temperature Range: - 10C
• Type Of System: Heavy Duty

Enriched with a team of experts of the industry, we are engaged in offering Field Data Loggers. These Field Data Loggers offered by us available in excellent design and are simple to install and easy to operate. In addition, these Field Data Loggers are completely tested by expert’s supervision. Features: Longer service life Efficient working Low maintenance

Name: GYRATORY SIEVE SHAKER,Code: 09065-01 ,ELECTRICALLY OPERATED, MAX. UPTO 8 SIEVES, OF 8" DIA. WITH CROMPTON MOTOR. OPERATION 230V SINGLE PHASE

Standard Test Sequence as per IS No. 13779:1999 (Cl 12.7.2) is pre loaded The equipment consists of RS 232 port to interface with PC VDI-Soft Software controls the equipment

For spirometry, FVC, SVC, MV and MVV measurement Integrated program for prepost comparison Meets ATSERS standards High-quality accessories for maximum precision, e.g. SCHILLER sensors SP-20 or SP-150 that are absolutely insensitive to humidity

• Brand Name: SUMERU
• Automation Grade: Manual
• Weight: 150
• Condition: New
• 700 BAR: OIL AND WATER BASED
• Minimum Order Quantity: 1 Piece

The 3-Phase Power Monitoring system is a digital signal controller based system that can be used to analyze and record the power line signal going out of a power source. The system is capable of measuring non-sinusoidal voltage and current wave forms containing high harmonics. The instrument is used to measure and compute the Power, RMS Value of current, Power Factor as low as ±0.1 and communicates these parameters to the remote PC through MODBUS on RS-485 network.  

• Features: Competitive prices, Best grade materials, High strength
• Usage: Industrial
• Channels: 2
• Mainframe Size: Miniature
• Display: Digital