Testing Equipment Dealers in Tumkur Road, Bangalore

Digital torque tool tester is specially designed to test the tightening and loosening torque of electrical screw drivers and torque tools. This unique digital torque tester consists of inbuilt torque sensor and digital torque indicator and functional switches.

• Battery volts: 6/12 V

High Rate Discharge Testers are designed to test crankingperformance of Automotive (SLI) Batteries as per various National and International specifications. The unit comprises of Electronic Active Load to discharge Battery at high current. (Normally at 3*C20 or 5* C20) keeping the current constant through out the test. The test is terminated automatically when the Battery reaches the preset ‘End Voltage’.Micro processor based digital timer with non volatile memory records the discharge time precisely up to 0.01 seconds. The unit is rated for short duty of Max. up to 10 minutes. However it can be used for continuous discharge at lower currents (30% of its max. capacity) to test Capacity of Battery at C1, C3, or C5 ratings.

• Analysis elements: Au Ag Pt Pd Rh Ru Cu Zn Ni Cd In Os Ir W (from Al To U, Around 79 Elements)
• X-ray source: Mo Material X-ray Light Tube (wind Cool, No Radiation)
• Test time: 0
• Operation system: Windows 7
• Load frame material: Steel
• Display: Digital

When it comes to the supplying of Testing Equipments, one can always bank on us. We offer wide range of Industrial Testing Equipments in the indian market. They are remarkable for offering accurate measurement of various tests and research. In addition to this, we are the most prominent Testing Tools Manufacturer as well as Supplier in India.

• Phase: Single Phase
• Voltage: 5 Kv
• Weight: 10 Kilogram
• Power Supply: 220 - 240 V
• Supply: AC
• Display Type: Analog
• Usage/Application: High Voltage Test
• Model No.: HVAC-30
• Brand: Monarch Controls
•  :  

• Brand: Elmeasure
• Country of Origin: Made in India
• Usage/Application: Industrial

• Brand Name: PressnPresstech
• Weight: Up to 450 Kg
• Power Source: Electric
• Height: Up to 3.5 Feet
• Pressure Output Range: 10 Bar to 400 Bar
• Phase: Three Phase

• Material: Mild Steel
• Input Voltage: 220V
• Frequency: 50 Hz
• Measurement Range: 300 mm
• Operating Temperature: 60 Degree C.
• Distance Across The Poles: 2 inch
• Lifting capacity: 5.5 kg
• Usage/Application: Industrial

• Brand Name: IHVP
• Power Supply: 115V to 230 V
• Frequency: 50 Hz to 60 Hz 
• Display Type: Digital
• Phase: Single Phase
• Height: 166mm

• Brand: Systronics
• Payment Terms: T/T (Bank Transfer)
• Model Number: 304
• Usage: Laboratory
• Temperature : 0 - 1000 Degree Celsius
• Voltage : 220V
•  :  

• Color: White
• Usage/Application: Laboratory
• Packaging Type: Box
• Display Type: Digital
• Brand Name: Omega
• Maximum Drive Stroke: 12 mm

• Color: Black
• Brand Name: Taparia
• Weight: 250g
• Model Name/Number: MDT - 81
• Usage/Application: Insulation Testing
• LCD Display: Yes
• Material: Cast Iron

• Type: High Voltage Testers
• Condition: New

the test rig is a plc based and is used for conducting the following tests on the coil. 1. High voltage ac/dc test (100v- kv & leakage current 0 - 20ma) 2. Insulation resistance test (100 -1000vdc & 1k - 1g ohms) 3. Impulse winding test (100v - 3000vdc) 4. Resistance test with tempreture componsation (1m - 10 ohms)

We offer crimp testers. Backed by experienced and expert team we are offering range of crimp testers.

• Dimension: 143mm x 81mm x 25mm (H x W x D)
• Construction: Moulded plastic case, integral battery compartment, external earth connection
• Weight: 200g
• Measurement range: -200kV to 200kV at a distance of 150mm
• Accuracy: +/-5%

The Model 983v2 Static Locator provides accurate measurement of electrostatic charges. Its design enables fast response, low drift and ease of operation. The 983v2 can operate in “Continuous” or “Peak Hold” mode to record changes in the level of charge or the highest charge detected respectively. It is suitable for use by production, maintenance, inspection and quality engineers and on any material where static charge may be an issue.   Features & Benefits Compact design Lightweight, pocket sized device Large high contrast LCD screen with digital display Easy to read in different lighting conditions Continuous and Peak Hold modes Can measure fluctuation in charge levels and/or the highest level detected In-built distance meter Clear indication of correct operating range for consistent, accurate readings Robust plastic housing High durability Instrument case Safe, clean storage when not in use    

• Type: Digital
• Weight: 300 Gms
• Color: Grey
• Phase: Three
• Brand: Elmeasure
• Model Name/Number: LG+1119
• Usage/Application: Industrial
• Version Of Communication: RS 485(Optional)
• PF Display: Programmable
• Accuracy Class: CL0.5,CL1.0

• Rotational Speed: 3,000 rpm (Max). 10,000 rpm (Optional)
• Test Load: up to 10,000 N
• Temperature: ambient to 100 Deg C

The Four Ball Tester is an excellent development and quality check instrument for developers and users of lubricants and additives. The unique sample configuration of three bottom balls and one top ball makes a very stable and a repeatable contact in-turn, allowing tests results to be very repeatable. The Four Ball Tester can be used to determine Wear Preventive properties (WP), Extreme Pressure properties (EP) and friction behavior of lubricants. The wide acceptance of test results of the Four Ball Tester make it an excellent choice to benchmark products. It is a good choice for R&D due to its relatively inexpensive samples and ability to produce quick and repeatable results. A rotating steel ball is pressed against three steel balls firmly held together and immersed in lubricant under test. The test load, duration, temperature and rotational speed are set in accordance with standard test schedule. In Wear Preventive (WP) tests – also called Anti Wear (AW) tests – the average scar diameter on the bottom three balls is reported. The size of the scar shows the ability of the lubricant to prevent wear. A larger diameter indicates poor wear preventive property while a smaller indicates superior wear preventive property. In Extreme Pressure (EP) tests the lubricant is subjected to load that is increased in specified steps after every run. This increase in loading is continued till a load is reached where the lubricant fails. The failure of lubricant is indicated by welding of the bottom three balls to the top ball. The load at which welding occurs is the index of extreme pressure property of the lubricant.   Features     Single instrument for Extreme Pressure (EP) and Wear Preventive (WP) tests. Built-in “Collet Master” attachment for sample loading. Optical microscope included for scar measurements. Computer controlled operation with software license included. Availability of a variety of options. Options     Automated Loading Arrangement KRL Shear Stability Attachment Rolling Fatigue (IP 300) Attachment Ball on Three Disks Attachment High Temperature Ball Pot (ambient to 200 Deg C) Digital Image Acquisition System (in lieu of optical microscope)  

• Features: Various sizes , Fine finish , Easy to use.

CNC GEAR TESTER I MAKE MAHR OKM GMBH MODEL GMX 400 CAPACITY MAX WORKPIECE DIA-400MM MAX WORKPIECE LENGTH-700MM OTHER FEATURES -SOFTWARES FOR INSPECTION OF SPUR, HELICAL GEARS (EXTERNAL & INTERNAL)FOR LEAD, PROFILE & PITCH ERRORS. -EVALUATION ACCORDING TO DIN, AGMA & JIS. -INSPECTION OF SPIRAL BEVEL GEARS -INSPECTION OF FACE GEARS.. Other Features #Softwares for inspection of spur, Helical Gears External & Internal) for lead, Profile & Pitch Errors #Inspection of Hobs #Inspection of Worm & Worm Wheel

The output signal from the Valstat® SM20 online electrostatic charge sensors ( minimum 1, maximum 18 sensors) can be connected to one or more colour touch panel HMIs for remote or local continuous monitoring and analytics. The collected data is monitored and when the measured value exceeds the measurement range or a pre-set safety level, an alarm sounded. The collected data can be stored, retrieved and analysed. Distinct from a hand-held meter that is used to periodically measure static charges, the Valstat® SM20 is permanently fixed at the location where the target is to be monitored. Hence, variations in measurement due to different operators, location, and distance are completely eliminated. As a result, a real-time, accurate, and continuous signal proportional to the static charge is made available for further analytics and diagnostics. The discharge or neutralising effect of the static charge eliminator is efficiently monitored for continual safety, and preventive maintenance. Expensive man-hours for inspection, testing, and validation are also effectively reduced.

MI 3109 EurotestPV Lite is a photovoltaic (PV) tester. It performs all necessary tests required on photovoltaic installations. This includes all of the tests as required by EN62446, but also includes I - U characteristic measurements, calculation to STC values and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with pressing off only one button. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available.  Application Testing, evaluations and troubleshooting of photovoltaic installations. Power and energy efficiency measurements (AC and DC).

• Brand Name: STE
• Usage: Industrial, Laboratory, Collage, ITI, Institution, etc.,

Insulation Resistance Test Equipment Brand / STEUsage / Industrial, Laboratory, Collage, ITI, Institution, etc., Features: Robust MS Construction with wheels for ease mobility. Current Fine Control Variac. Digital output display. Interlocks to protect at atypical use. Electronic-In-Circuit-Protection. Over Load Protection. Suitable Current Terminals for different Current range.

• Display: Digital
• Frequency: 50 - 60 Hz
• Power Source: Electric
• Voltage: 250 V
• Material: Stainless steel

• • Power Supply :: 220V±10%, 50Hz
• • Measuring Range :: 0 – 150 kV IMPULSE PEAK (can be extended as per customer requirement)
• Ratio: 500
• Accuracy: 1% of the reading

  Feature• Direct reading in kV.• Measurement of ‘Positive’ and ‘Negative’ Impulse Voltages.• 3½ Digit LED-Display.• Terminal for oscilloscope connection to observe Impulse wave shape. Technical • Power Supply : 220V±10%, 50Hz • Measuring Range : 0 – 150 kV IMPULSE PEAK (can be extended as per customer requirement) • Ratio : 500 • Accuracy : 1% of the reading • Resolution : 0.1 kV • Freq. of operation : 50 Hz • Voltage at : 0 – 300 V for 0 – 150 kV display

For efficient performance, Hydro Fracturing Unit, offered by us, is highly acclaimed in the market. Hydro Fracturing Unit, that we make available, is robustly constructed and in accordance with the highest quality standards. this precision engineered Hydro Fracturing Unit is in extensive demand, owing to its cutting edge performance. Technical Description JCR DRILLSOL Hydro-Fracturing Unit JCR DRILLSOL model JCR HFU is a truck mounted Well Rehabilitation Unit designed for Hydro-fracturing of low yield bore-wells of 6 and 6½-inch diameter in hard rock formations. It also consists of yield test pumping unit with necessary instruments and tools. Features available only in Frac-Tech model MAXFT-1 JCR HFU is Hydraulically driven Hydro-Fracturing Unit operated through a transfer gearbox assembly thus eliminating an additional prime mover, space, weight and cost. Availability of Down Hole TV Camera to identify visually the fracture zones of best result and to prevent blind entry into the unknown bore-well and dangerous setting of packer. Also, exact depth & distortion of casing pipe, static water level and bore-well depth are visualized thus eliminating any erroneous drillers log and geo-physical logging. A separate Flow control valve is provided to engagedisengage the high pressure Hydro-frac pump ‘alone’ from the hydraulic circuit during any wrong dangerous setting of packer.Our basic Hydro-fracturing Unit Model JCR HFU includes A Base Frame with built-in lockable storage facility for Frac pipes, Packers, submersible pumps and tools etc.. High-pressure hydro-frac pump driven hydraulically. 2HP Engine driven super charge (Booster) pump or Hydraulic hand pump. Hydraulic Power Pack. Hydraulically operated Winch. Hydraulically operated Crane. Hydraulic leveling jacks. 4 NOS Hose and Cable reels. Well head Assembly. Centralized Hydraulic controls with gauges. Diesel Generator 7.5 KVA. Submersible pump (3 H.P., 28stage). Truck for mounting.ALCargo 100.12 Night Lights Essential tools and Accessories Down Hole Camera with BW TV monitor. Hydraulic packers 6 inch dia – Single. Frac- Pipes of required quantity. Hydraulic inflate hose of required length. Electrical cable reel of required length. Required adapters, couplings, handling tools, protective gear and manuals et Description of Main Components High Pressure Hydro-Frac Pump Type : Two speeds hydraulically driven with dual functions break and develop. In break function the pump operates in low speed producing over 2500 PSI at 40 GPM, which is the pressure for fracturing. In well developing function the pump operates at high speed producing 500 PSI at 80 GPM, which develops the well allowing for optimal water flow Hydraulic system Working Pressure: 3000 PSI Crane : 8 ton capacity, Hydraulically operated with manual Extension Winch 1 Ton capacity, Hydraulically operated Spooling capacity30mts Wire rope : 13mmHydraulic Power Pack : Truck driven consisting Transfer gear box, Hydraulic Pump, relief valves, suctionreturn line filters and reservoir. Hydraulic Hand PumpTypeApplication: Dual Displacement Packer inflationWorking pressure : 700 bar Super Charge (Booster) Pump : 2 HP capacity Self-priming, engine driven with positive displacement. CarrierRequired Engine Capacity : 110 BHPRecommended: Ashok Leyland `Cargo’ Model : 100.12 PackerType : Single - Hydraulic Diameter: 6 inchesAccessories : Rubber seals, Adapters, couplings etc.. of required sizes. Frac Pipes Type: Seamless of standard 15 feet length Diameter: 1 ½ inch nominal Working pressure: Tested & certified for 3000 PSI Inflate Hose : Diameter: ¼ inch Working Pressure: 700 bar Down Hole TV CameraType : Video camera, water proof up to 500 feet.Accessories : BW TV monitor, Stand, Connectors and winch. Generator Type : Air cooled, Three phase, 415 VAC Capacity : 7.5 KVA Submersible pump : 3 HP, 3-phase with electrical cable, control panel and dry run preventer.

• Color: White
• Usage/Application: Laboratory
• Packaging Type: Box
• Display Type: Digital
• Brand Name: Omega
• Maximum Drive Stroke: 12 mm

• Brand Name: Unitech
• Accuracy: 0.5% of FSD
• Starting Pressure: 1 Kg/cm2
• Dimension: 350 x 350 x 200 mm
• Plunger Diameter: 0.5 cm (Area: 0.196 cm )
• Pressure Port: 3/8
• Weight: 12 Kg
• Capacity: 100 kg/cm2

ACCURACY +-0.5% + 1 DIGIT RANGE L 0-2000H C 0-2000UFD R 0-20 MΩ RESOLUTION 0.1µHPFΩ DISPLAY 3 ½ DIGIT 0.5” LED MEASUREMENT FREQUENCY 1KHz UP TO 2µFH,100Hz FOR ABOVE 2µFH DISSIPATION FACTOR 3 DIGIT DISPLAY PROVIDED MEASUREMENT REMOTE KELVIN SENSING POWER AC MAINS 230 V ± 10%, 50Hz SIZE All Address, Data and Control signals are terminated in 50 pin berg stick for user expansion WEIGHT LESS THAN 3 KG