Transformers Dealers in Dasarahalli, Bangalore

• Application: CNC Machines

3 phase isolation transformers,  used for C N C  Machines & Electrical Panels

• ONLINE MOISTURE ABSORBING EQUIPMENTS: SILICA GEL AIR BREATHERS
• SILICA GEL BREATHER: TRANSFORMER AIR BREATHER

Silica gel Air Breathers: SILICA GEL Air Breathers, [on line moisture extraction equipment from Oil Cooled Transformers] used in oil cooled Power / Distribution Transformers, Bus ducts, Gas turbines, wind turbines & many more applications. Available in different sizes of 125gms. To 15kgs. Capacity depends on the capacity of Transformers. Silica Gel Breathers available in two different models one with fully clear view type and another with metallic with small window view type. Both models are connected with Plastic [ABS] & Aluminum Die-cast top & bottom caps fitted with rubber ‘O’ rings to arrest air in joints with clear view oil cup. Silica gel Breathers Clear view type with Aluminum & ABS die cast top & bottom caps with Transparent Acrylic tube body Silica Gel container of different diameter & height depends upon the Silica Gel filling capacity. Available in different end connections of Thread & flange type as per client’s specification and requirement. Silica gel Breathers Metal with Window view type fitted with Aluminum Die-Cast top & bottom caps with aluminum body Silica gel container of different diameter & height depends upon the Silica Gel filling capacity. Available in different end connections Thread & flange type as per client’s specification and requirements.

• Efficiency: 98%
• Protection: HIGH VOLTAGE , LOW VOLTAGE , SINGLE PHASE and MOTOR PROTECTION
• Input voltage of 1KVA - 150KVA SINGLE PHASE: 170 V - 270 V
• Input voltage of 3KVA - 1,500KVA THREE PHASE (AIR/OIL COOLED): 340 V - 470 V
• OUTPUT REGULATION: +/-1%
• RATE OF CORRECTION: 70 V / Sec Ph-Ph
• CONTROL: MICRO PROCESSOR
• DUTY CYCLE: CONTINUOUS
• COOLING: AIR / OIL COOLED

Excelon cvt consists of buck-bust transformer ,whose secondary is connected in series with the main input and the load. The primary is supplied by an auto-transformer driven by a servo-motor. The motor is driven by a solid state sensing and control which senses output voltage.

• Mounting Type: PCB , secondary pins
• Product: AC Current transformer
• Primary conductor opening: Circular 7.00 mm

Current transformers , for Energy metering application. Nominal current rating 0.25 to 40 Amps  Turns ratio 1:2500 Accuracy class  0.2    

• Enclosure: Open Type
• Phase: Single Phase
• Input Voltage: 230V
• Winding: Toroidal
• Cooling: Air Cooled
• Current Capacity: 15 Amps
• Brand Name: Monarch Controls
• Production Capacity: 1000 Units Per Month

Our Distribution Transformers have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

• Core Type: Ring Core Type CT
• Material: Mild Steel
• Rated Voltage: 480,120 V
• Brand Name: Navago
• Power Source: Electric
• Rated Power (VA): 1.5 VA
•  :  

A transformer is a passive component that transfers electrical energy from one electrical circuit to another circuit, or multiple circuits. A varying current in any one coil of the transformer produces a varying magnetic flux in the transformer's core, which induces a varying electromotive force across any other coils wound around the same core. Electrical energy can be transferred between separate coils without a metallic connection between the two circuits. Faraday's law of induction, discovered in 1831, describes the induced voltage effect in any coil due to a changing magnetic flux encircled by the coil.

These are three phase Voltage transformers used for earth fault identification. A number of items have been supplied all over the country. OUTDOOR EPOXY MOULDED INSTRUMENT TRANSFORMERS   These are Epoxy moulded instrument transformers place in a moisture proof MS tank and filled with oil. Alarge number of such units have a been supplied by as all over the country.

Used in areas or industries where very large spikes, noise or transients or harmonics have to be suppressed & to give a clean basically 1:1 transformer with galvanic isolation. It can also be used where extensive lightening occurs. A 100% solid state equipment with no moving parts and a life of over 25 years , Capacities vary from 1 KVA – 45 KVA in Single Phase.

We offer finest quality voltage transformers. Voltage Transformer is generally used in an electronic circuit that requires constant voltage/current or VA Rating. Our Industrial Voltage Transformer is designed for industrial applications where electromagnetic devices such as relays & solenoids are used. This insulation is used to electrically insulate turn to turn windings, primary to secondary windings and ground. The transformer maximizes in rush capability and output voltage regulation when electromagnetic devices are initially energized. Voltage transformers are vacuum impregnated with one component solvent less UP impregnating resin for thermal class 200(H) and oven-cured, which seals the surface eliminates moisture. Features : Provides strong mechanical bondOffers protection for environmentVacuum impregnatedDurableSturdyCorrosion resistant Types of Encapsulation : Tape WoundResin cast

• Power: 4 Watt
• Phase: Single Phase
• Frequency: 20Hz/20KHz
• Winding Material: Copper
• Input Voltage: 100V
• Usage/Application: Electricv
•  :  

• Capacity: 100
• Material: MS
• Winding Material: Copper
• Material: Copper
• Driven Type: Electric
• Cooling Type: Dry Type
• Operating Type: Manual
• Production Power: 2500
• Waveform Distortion: NA
• Usage: Industrial
• Feature: Distribution
• Hardness: NA
• Mounting Type: Ground Mounted
• Type: Power Transformers
• Weight: 5-10 Tons
• Frequency: 50 Hz
• Tensile Strength: NA
• Phase: Three Phase
• Efficiency: Greater Than 90%
• Warranty: 2 Year
• Cooling System: Air Cooling
• Country of Origin: India
• Enclosure: MS
• Relative Humidity: Less Than 90%
• Corrosion Resistance: Yes
• Energy Efficiency Level: 98%
• Max Ambient Air Temperature: 50
• CT Ratio: NA
• Class Of Insulation: F
• Coil Structure: Wound
• Tapping Range: +5 to -10%
• Maximum Ambient Air Temperature: 50
• Transformers: As desired
• Surface: Polished

We are one of the very few manufacturers of furnace transformers in India. These are very popular in the market due to its compact design, durability and efficiency. These are commonly used in induction furnaces. Furnace transformers are available in different sizes and capacities.

Dry type Transformers, class 'H' insulated, have insulating materials which are with high dielectric strength and are capable to withstand high temperatures. The temperatures are generally made to comply with IEC-60076/IS-2026/IS-1171.Range up to 1600 KVA of 11 KV Class.   Advantages:     Use of non-biodegradable materials makes these suitable for strict   environmental conditions.   No fire or explosion hazards because of use of nonflammable   materials & absence of any liquid insulation.   Non-requirement of oil sump makes these ideally suitable for   installation near load centers thus reducing cabling costs and improving voltage regulation. Owing to adherence to International Quality norms and prompt customer services, VTST has an excellent brand image and an ISO 9001:2000 certified company with it’s headquarter in Bangalore (INDIA).     Zero Maintenance:       Drastically reduced maintenance and cleaner looks because of absence of any insulating liquid.   A lifecycle analysis would reveal the cost-effectiveness of Dry type Transformers in the long run   though these require higher initial cost.   Easy handling and access to active parts for inspection.   The Dry type Transformers are designed for required BIL values and are tested for dynamic short   circuit.

B V Engineers offers widest range of welding products, submerged Arc Welding Machine, air plasma Cutting Machine, Automatic MIG Welding System for PEB with magnetic trolley, application , Specialised system for Welding of pipes, , for your requirements please contact bvengineers@gmail.com

Tanks for Distribution and small Power Transformers Traction Transformer Tanks , Converter panels & Heavy Sheet Metal components Transformer Tanks Range: Application : Power transformers Distribution transformer Flame proof transformers Locomotive transformers

We have a technologically advanced manufacturing facility that has a number of latest tools and equipment. All our tools and equipment work on the latest technology to ensure maximum effectiveness. We also follow a strict quality management program to ensure optimum quality of our product range. Regular inspections based on well defined quality parameters are conducted so that our products are as per the desired quality standards.

• Cooling Type: Oil Cooled
• Capacity: 63KVA TO 2500KVA
• Mounting Type: Floor Mounted
• Speciality: Designed for trouble-free performance,High quality & reliability.,Energy Efficient
• Voltage Rating: 11KV/433V
• Phase: Three Phase
• Frequency: 50 Hz
• Material: Mild Steel
• Ambient Temp Degree Celsius: 50 to 60 Degree C
• Maximum Humidity: 95%

• Cooling Type: Dry Type/Air Cooled
• Phase: Single Phase
• Material: Mild Steel
• Automation Grade: Semi-Automatic
• Accuracy Class: 2

We are offering distribution transformer. 100kva 11kv433v oil type distribution transformers star rated transformer

• Type: SERVO STABILSER
• Brand Name: GEMINI
• Application: VOLTAGE CORRECTION
• Phase: 1/3
• Place of Origin: BANGALORE

Quality products like: transformers, plating rectifiers, d.c regulated thyrister power supplies, servo stabilsers, d.c motor drives, a.c furnace controllers, auto transformrs(dimmers)3phase to single pahse transformers, isolation transformers , dry type & oil cooled transformers, high current welding& furnace transformers and custom built lectrical & electronic test & measuring equipments.

We effectively Commission the Transformers at nominal costs. Our Commissioning Services for Transformer are provided by qualified engineers and experienced technician who have in-depth in this field.

Miracle Electronic’s UI Transformer consists of a range of high quality low profile encapsulated isolating transformers with twin 115V AC 50/60 HZ primary windings which are connected in series for 230V or parallel for 115V operation. Miracle Electronic’s UI Transformers / Low Profile Transformers come with Double section glass fibre reinforced polyamide bobbins. Our UI transformers are 100% electrical and Flash tested, have low radiated nose and possess low inter-winding capacitance. Miracle Electronic’s UI Transformers: Making the most of devices. Miracle Electronic’s UI Transformers are extremely durable, come with superior wiring, varnishing, connection terminators. Our UI Transformers are indeed highly efficient and provide excellent regulation with minimal temperature rise. Product Variants available: Range of 2 VA, 4 VA, 6 VA, 10 VA, 14 VA, 18 VA, 24 VA 120 /240 V 1 Phase, 50 Hz General Product Features & Inclusions Low Profile Low Inter winding Capacitance 5 KVA Primary /Secondary Insulation CRGO core UI cores Cold Rolled Grain Oriented steel cores Thermal fuse – Optional Class B / F Insulation Epoxy PCB Mounting arrangements

• Warranty: 1 year
• Voltage Ratio: 25 KVA to 5 MVA
• Speciality: Easy To Install, Superior Finish
• Current: 500A
• Rated primary current: 100-1500A
• Rated frequency: 50Hz or 60Hz

We are the main supplier of this product.

• On Load Tap Changer: Two Earthing Terminals ,.and Lifting Lugs

We are highly established company engaged in manufacturing, supplying and exporting the highest quality Transformer, which is very important electrical machinery. While designing, manufacturing, testing and commissioning of these Transformer, we give utmost care to ensure complete satisfaction of the clients. Our range power distribution Transformers helps in converting low voltage into high voltage or visa-versa and accordingly the transformer is termed step - up or step-down. All Transformers manufactured by us work on the principle of electro-magnetic induction. In order to maintain our established quality trademark, we use refined raw materials and other kinds of modern machines

We offer tap position indicator. Designed to indicate the tap position of transformers 1-39 position user settable optional rs-485 modbus rtu communication

• Features: Accurate dimensions, Easy to fit, Ruggedness