Transformers Dealers in Hmt Main Road, Bangalore

Our Ultra Isolation Transformers have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

• Type: High Voltage Transformer
• Rated Voltage: 110kV
• Warranty: 2 Year
• Packaging Type: Wooden Box
• Accuracy Class: 0.1 to 1.0 & 0.2S, 0.5S
• Frequency: 50Hz
• Dimension: Customer requirement

The above-mentioned price is tentative only, the price will vary based on an actual technical specification

• Material: Cast Iron
• Brand Name: Navago
• Rated Power: 5 to 10 VA
• Secondary Current: 5 Amps or 1 Amps
• Rated Voltage: 230 V, 415 V
• Accuracy Class: 0.2, 0.5, 1 or 3 etc

• Enclosure: Closed Type
• Phase: Single Phase
• Input Voltage: 230V
• Winding: Toroidal
• Cooling: Oil Cooled
• Current Capacity: 20Amps
• Brand Name: Monarch controls
• Production Capacity: 1000 Units Per Month

• Input Voltage: 110Vrms
• Output Voltage: 2.3 Volts
• Burden Resistance: 3.3Kv
• Turns Ratio: 48:1

Voltage transformers (VT), also called potential transformers (PT), are used for metering and are designed to present negligible load to the supply being measured . They have an accurate voltage ratio to enable accurate metering.VT1329 has the following specifications: 110 Vrms 2.3 V 3.3 k Ω 48 : 1 4.0 kV AC -10 ... +60° C Pin Terminals PCB  

• Capacity: 100
• Material: MS
• Winding Material: Copper
• Material: Copper
• Driven Type: Electric
• Cooling Type: Dry Type
• Operating Type: Manual
• Production Power: 2500
• Waveform Distortion: NA
• Usage: Industrial
• Feature: Distribution
• Hardness: NA
• Mounting Type: Ground Mounted
• Type: Power Transformers
• Weight: 5-10 Tons
• Frequency: 50 Hz
• Tensile Strength: NA
• Phase: Three Phase
• Efficiency: Greater Than 90%
• Warranty: 2 Year
• Cooling System: Air Cooling
• Country of Origin: India
• Enclosure: MS
• Relative Humidity: Less Than 90%
• Corrosion Resistance: Yes
• Energy Efficiency Level: 98%
• Max Ambient Air Temperature: 50
• CT Ratio: NA
• Class Of Insulation: F
• Coil Structure: Wound
• Tapping Range: +5 to -10%
• Maximum Ambient Air Temperature: 50
• Transformers: As desired
• Surface: Polished

• ONLINE MOISTURE ABSORBING EQUIPMENTS: SILICA GEL AIR BREATHERS
• SILICA GEL BREATHER: TRANSFORMER AIR BREATHER

Silica gel Air Breathers: SILICA GEL Air Breathers, [on line moisture extraction equipment from Oil Cooled Transformers] used in oil cooled Power / Distribution Transformers, Bus ducts, Gas turbines, wind turbines & many more applications. Available in different sizes of 125gms. To 15kgs. Capacity depends on the capacity of Transformers. Silica Gel Breathers available in two different models one with fully clear view type and another with metallic with small window view type. Both models are connected with Plastic [ABS] & Aluminum Die-cast top & bottom caps fitted with rubber ‘O’ rings to arrest air in joints with clear view oil cup. Silica gel Breathers Clear view type with Aluminum & ABS die cast top & bottom caps with Transparent Acrylic tube body Silica Gel container of different diameter & height depends upon the Silica Gel filling capacity. Available in different end connections of Thread & flange type as per client’s specification and requirement. Silica gel Breathers Metal with Window view type fitted with Aluminum Die-Cast top & bottom caps with aluminum body Silica gel container of different diameter & height depends upon the Silica Gel filling capacity. Available in different end connections Thread & flange type as per client’s specification and requirements.

We are the perfect destination for the best quality Resin Cast Transformer in the market. These Resin Cast Transformers are made of resin cast substances that are fire and humidity resistant and non -polluting in nature. Our Polyester Resin Cast Transformer can endure higher impulse voltage and temperature making it more reliable than the usual power transformers. They are suitable for installation on high- rise building where fire safety is a concern. Features : Fire resistantHumidity resistantRust freeDurable Specifications System Voltage : Up to 11kV voltage classOther specifications available as per the requirement of the clients.

• Power: 4 Watt
• Phase: Single Phase
• Frequency: 20Hz/20KHz
• Winding Material: Copper
• Input Voltage: 100V
• Usage/Application: Electricv
•  :  

• Phase: Single Phase
• Cooling Type: Dry Type/Air Cooled
• Frequency: 50 Hz
• Winding Material: Copper
• Input Voltage: 110-220V
• Output Voltage: 12-24 V

• Application: CNC Machines

3 phase isolation transformers,  used for C N C  Machines & Electrical Panels

• Efficiency: 98%
• Protection: HIGH VOLTAGE , LOW VOLTAGE , SINGLE PHASE and MOTOR PROTECTION
• Input voltage of 1KVA - 150KVA SINGLE PHASE: 170 V - 270 V
• Input voltage of 3KVA - 1,500KVA THREE PHASE (AIR/OIL COOLED): 340 V - 470 V
• OUTPUT REGULATION: +/-1%
• RATE OF CORRECTION: 70 V / Sec Ph-Ph
• CONTROL: MICRO PROCESSOR
• DUTY CYCLE: CONTINUOUS
• COOLING: AIR / OIL COOLED

Excelon cvt consists of buck-bust transformer ,whose secondary is connected in series with the main input and the load. The primary is supplied by an auto-transformer driven by a servo-motor. The motor is driven by a solid state sensing and control which senses output voltage.

One of the reasons why it was not introduced earlier was the lack of suitable small and lightweight control and rectification equipment before the development of solid-state rectifiers and related technology. Another reason was the increased clearance distances required where it ran under bridges and in tunnels, which would have required major civil engineering in order to provide the increased clearance to live parts.

Used in areas or industries where very large spikes, noise or transients or harmonics have to be suppressed & to give a clean basically 1:1 transformer with galvanic isolation. It can also be used where extensive lightening occurs. A 100% solid state equipment with no moving parts and a life of over 25 years , Capacities vary from 1 KVA – 45 KVA in Single Phase.

We manufacture and supply superior quality LT main control panel with incoming ACB or MCCB and outgoing MCCB.

We are a trusted distribution transformer tanks manufacturer and supplier in karnataka. The distribution transformer tanks, supplied by us, are thoroughly tested on several parameters that make us ensure their durability, smooth performance and longer service life. The clients can avail the distribution transformer tanks from us in varied specifications as per the requirement.

• Cooling Type: Oil Cooled
• Capacity: 63KVA TO 2500KVA
• Mounting Type: Floor Mounted
• Speciality: Designed for trouble-free performance,High quality & reliability.,Energy Efficient
• Voltage Rating: 11KV/433V
• Phase: Three Phase
• Frequency: 50 Hz
• Material: Mild Steel
• Ambient Temp Degree Celsius: 50 to 60 Degree C
• Maximum Humidity: 95%

We design and manufacture a wide range of SMPS Ferrite Transformers that is ideal for use in various industries such as Engineering and Electrical. The components used in these transformers are procured from reliable vendors to ensure defined quality standards. Further, we also follow a strict quality management program to ensure compliance with the international quality standards.