Transformers Dealers in Kamakshipalya, Bangalore

How safe your device would be if it were to purely run on the beast surge of Direct Current of electricity? Would you derive maximum utility from an Electrical appliance if it had to rely on the non-sustained charge of a couple of batteries? Regarded as one of the most influential electrical innovations of all time, E & I transformers have successfully almost reduced the safety concerns associated with alternating current to zero. Miracle’s E & I Transformers have the ability to do what is precisely required by them – lower the voltage exactly to a value that is required by the appliance and keep them running right and safe. Miracle Electronics’ E&I Transformers: Making the most of Electrical devices. Miracle Electronic’s E&I Transformers are extremely durable, come with superior wiring, varnishing, and connection terminators. Our E&I Transformers are indeed highly efficient and provide excellent regulation with minimal temperature rise. All our E&I Transformers are RoHS Compliant, High, and Reach Compliant. General Product Features & Inclusions CRGO core / CRNGO Round cores Cold Rolled Grain Oriented / Non Grain oriented steel cores Self Lead with Teflon PVC Cables Sleeves Connectors Thermal fuse Thermal switch Class B / F / H Insulation L Clamp / C Clamp / BOX Type Epoxy PCB Mountable Product Variants available: Range of 1 , 10, 20 , 25 , 50 ,100, 500 VA ,1 KVA and 5 KVA 20 KVA Air cooled 120 /240 V 1 Phase, 3 Phase 50 Hz – 60 Hz Miracle Electronics also undertakes requests for custom design and development of E&I Transformers. Please contact our Customer Support Team for more details.

• Type: Power Transformers
• Weight: 5-10 Tons
• Finishing: Polished
• Packaging Type: Wooden Box
• Speciality: Easy To Use, High Efficiency, Reliable
• Usage: Industrial
• Minimum Order Quantity (MOQ): 1 Unit

Apart from online payment processing methods, we also facilitate payment through offline mediums. We follow strict quality procedures that are as per the guidelines, help us in presenting dependable and cost-effective product range. We offer high quality three phase transformer.   Additional Information : Item Code - TPT-01

A ENERGX CVT, the AC mains powers the input which is widely separated physically from the solated output winding. The input winding normally runs at very moderate Flux linkage levels. The output winding exhibits energy characteristic and this energy storage operates in conjunction with mains capacitor to produce self generated AC flux field which is indirectly excited from the winding. The result is instantaneous voltage regulation and spikes. Sine wave output. A perfect answer for every electronic equipment.

Started our business operations as manufacturer, supplier, exporter and trader, we are engaged in offering TAP Position Indicator. Suitable for industrial environment, thee indicators are offered with potentiometer provision for trimming, in order to compensate the lead resistance. Apart from this, to ensure robust construction, these indicators are checked thoroughly. Features: Functional accuracy Precise reading Durable finish Details: Visual 7 segment digital display Onoff switch with lamp indication provided for power supply status Potentiometer provision for trimming to compensate the lead resistance Panel mounting with aesthetic value Robust & Rugged i.e. suitable for industrial environment Greater degree of accuracy & consistent reliability Specifications: Auxiliary Voltage 110 or 230 or 415V AC +15%, 50 Hz Resistance Tel-transmitter 1 kilo OHMS per step, 3 wire connection Display 1 to 99 positions 2 digit 7 segment LED display Accuracy Tolerance + 2% Lead compensation Trough a potentiometer adjustment in the front fascia Type of mounting Panel Mounting Operating temperature 0°C to 55°C Break down voltage 2KV, between all live terminal connected together and body for 1min Dimensions in mm 96 mmx96 mmx70 mm (Panel cutout size:90mmx90mm+0.1 -0.00) Applications: OLTC panel to indicate tap position

• Power: 2 amps
• Phase: Single Phase
• Brand Name: powertech
• Output Voltage: 12V TO 24V

Silica Gel Breather, spherical silica gel beads, Silica Gel

Three Phase Transformers, Auto Transformers, CONTROL TRANSFORMERS

Resin VOLTAGE TRANSFORMER which is available in various dimensions and specifications to cater to the varied requirements of clients. These are developed using innovative techniques of production to ensure international quality standards, widely known for high efficiency, low maintenance, durability and low power consumption. These can be used in Metering& protection purposes. Our range of H.T. Indoor Resin Cast VOLTAGE TRANSFORMER includes following: System voltage: 3.36.6112233 KV Indoor VOLTAGE Transformer

• Features: Longer working life, Quality tested, Rugged design.
• Window Shape: Square / Rectangular Window
• Use: Majorly used for economical transmission and supplying of electric power.

Types: Using Crgo/crno Grade Various Sizes Depending On Customer Requirements Any other Customers Made Types Applications : Used in Various Power Supply Applications for Electrical, Electronics & Telecommunication Industries.

Applications Metering & Relaying Energy meter panels or Metering cubicles Medium voltage switchgears and control panels Medium voltage vacuum circuit breaker panels Pcc Panels Motor Control Panels

• Efficiency: 97% typical.
• Nominal AC Output Voltage Ratings: 120/240VAC or 120/208/240 VAC, single phase, 60 hertz.
• Output Impedance: 3-4 % typical.
• Harmonic K-Rating: K-4, K-7, K-13, or K-20 rated in accordance with : K = Σ Ih(pu)2 h2
• Basic Impulse level: No less than 10,000 Volts.
• MTBF: ≥ 200,000 hours.
• Transformer Steel: Grain oriented, M6 grade, silicon steel.
• Flux density: ≤ 15k gauss.

Single Phase Isolation Transformer is available in variegated technical specifications. We hold expertise in manufacturing, exporting and supplying quality transformer that are used on all systems that require grounding on the load. Our isolation transformer is a copper wound, multi-shielded, single phase, K-factor rated, high efficiency, power conditioning isolation transformer. It is duty rated and belongs 600 volt class. This isolation transformer supports harmonic rich non-linear loads while maintaining safe operating temperatures. Easy to install and maintain, this isolation transformer is reckoned for its high quality, efficiency and reliability. Standards : The power conditioning system is designed in accordance with applicable portions of the following standards: American National Standards Institute (ANSI C57.110 & C62.41-1991) Institute of Electrical and Electronic Engineers (IEEE 519-1992) National Fire Protection Association (NFPA) 70, National Electrical Code (NEC) Federal Information Processing Standards Publication 94 (FIPS Pub 94) UL Listed to Standard 1561 C-UL listed to CSA Standard C22.2, No. 47-M90  Input Specifications : Nominal AC input voltage ratings: 480 VAC, 240 VAC or 208 VAC, 1 phase, with sufficient margin to sustain a constant input of +10% without saturation. The nominal operating frequency: 60 hertz + 3 hertz. The power conditioning system’s primary is configured single phase, two wire, plus ground, and includes full capacity taps at 2½ % increments, two (2) above and four (4) below the nominal voltage tap. Energizing inrush current will not exceed 10 times the full load input current for ½ cycle. Performance Specifications : Load Regulation : Maintained within +2.5% or less of nominal, from no load to full load. Overload : 500% for 10 seconds, and 1,000% for one cycle. THD : ≤ 1% added to the output voltage waveform under a linear load. Output Voltage : Sinusoidal with no flat topping when high crest factor (3.0 : 1), non-linear loads are present at the output. Audible Noise Measured at 1 Meter from the Unit : ≤ 50dBA Electrostatic Shielding : Incorporates two, or an optional three, solid copper foil electrostatic shields which minimize inner winding capacitance, transients, and noise coupling between primary and secondary windings. Common Mode Noise Attenuation : 126 dB with two shields, or 146dB with optional three shields. Transverse Mode Noise Attenuation : 3 dB down at 10kHz, decaying 20 dB per decade. Optional TVSS : Incorporates a fused (with front panel mounted, blown fuse lamp indicator), secondary connected, 3 mode spike suppression network. The TVSS is comprised of high energy metal oxide varistors with less than a 5 nanosecond response time and a maximum peak current handling capability of 40,000 amps (8x20μsec) per mode. Thesuppression network system will remain functional when subjected to ANSI/IEEE C62.41 Category B-3 waveforms. The spike suppression network increases the transverse mode noise attenuation to 3 dB down at 10kHz, decaying 40 dB per decade.   Main Transformer : Transformer Windings : All copper conductor construction, with separate primary and secondary, isolated windings. The transformer conforms to NEC article 250, that specifies a separately derived power source. The neutral conductor is sized for 200% of the ampacity of the phase conductor.Terminals are provided for isolated single phase output conductors, neutral conductor and ground. All leads, wires and terminals are labeled to correspond with the circuit wiring diagram. Basic Impulse level : No less than 10,000 Volts. MTBF : ≥ 200,000 hours. Transformer Steel : Grain oriented, M6 grade, silicon steel. Flux density : ≤ 15k gauss. Core losses : ≤ 0.6% of the KVA rating. Insulation : Class N, 200OC with a maximum temperature rise of 115OC above ambient, not exceeding 130OC under nonlinear loading per UL 1561. Cooling : Natural convection.   Cabinet : Enclosure : NEMA type 1, floor mounted, and indoor enclosure. Construction : Cabinets are manufactured from 14 gauge steel with base sub-structure suitable for fork lifting. Paint : Baked on, powder coat paint finish with proper pre-treatment. Provisions exist to hardwire input and output power connections to terminals located within the unit enclosure. Input and output conduit landing locations are available on the rear of the unit enclosure.   Environment : Operating Temperature Range : -20OC to +40OC. Humidity : 0 to 95% non-condensing. Altitude : Up to 5000 feet above sea level without de-rating.   Warranty : Manufacturer guarantees equipment to be free from defects in material and workmanship for a period of 2 years following shipment from the factory

• Features: durable and corrosion resistant, compact .

smps ferrite high frequency transformer, conventional transformers

We have multiple slitting lines to facilitate burr-free slitting of mother coils as wide as 1,200 mm down to 5 mm with precision in width to the order of a few microns. The core is manufactured on fully-automatic Core Winding machines ensuring high stacking factor. The core is then annealed in an inert atmosphere for relieving any stress. The result is a core in which all molecules are aligned in the direction of flux, thus ensuring the desired electrical characteristics.We maintain an extensive stock of the electrical steel required in various grades of CRGO and CRNGO, with thicknesses ranging from 0.20 mm to 0.35 mm. With a range of mandrels, from 10 mm to 150 mm, we are able to manufacture a wide range of cores with a maximum OD of 200 mm.

Prok dv’s make TAP POSITION INDICATOR (TPI) uses state-of-the-art dedicated hardwareto indicate the transformer tap position through two digit Seven segment LED displays, whileconnected to a remote transformer work, Tap position from 1 to 99 steps will be indicated bythe unit, increment of the readings will be in steps of one (each step represents 1 k- ohm),A potentiometer has been provided in front fascia of the unit, which can be used tocompensate the connecting lead resistance at site, ON/OFF switch provided in the front fasciawhich indicates the power on status of the unit.Note: If Terminal point 17- Variable point of tap position is open shows decimal point in theSeven segment displayPotentiometer shall be set to marking in the front faciaTAP Specification Transformer TAP- Steps Indication by means of 2 digit,Seven Segment Display. ON/OFF Switch in the Front facia with lamp indication to display the power input status Leads compensation through Potentio meter fine adjustment in the front facia Flush mounting Robust and rugged design, suitable for industrial environment

Features: * Complete electrostatic shielding &grounding. * Reduces power line noise, spikes & transients. * Total isolation from input and output. * Three phase to single phase conversion. Applications: * Analytical and Bio-Medical equipments. * CNC processors and peripherals. * Computer and peripherals. * Digital communication equipments. * Instrumentation and Telemetry. * Special purpose machinery. * Telecommunication equipment.

halogen transformers, Electronic Chokes, pulse ignitors, open type ballast

• Features: Ignition of oil and gas, High-performance and reliable ignition, Simple to use and installation, Robust enclosure for industrial use.