Transformers Dealers in Nandini Layout, Bangalore

Our Isolation Transformers have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

One of the reasons why it was not introduced earlier was the lack of suitable small and lightweight control and rectification equipment before the development of solid-state rectifiers and related technology. Another reason was the increased clearance distances required where it ran under bridges and in tunnels, which would have required major civil engineering in order to provide the increased clearance to live parts.

• Type: High Voltage Transformer
• Rated Voltage: 110kV
• Warranty: 2 Year
• Packaging Type: Wooden Box
• Accuracy Class: 0.1 to 1.0 & 0.2S, 0.5S
• Frequency: 50Hz
• Dimension: Customer requirement

The above-mentioned price is tentative only, the price will vary based on an actual technical specification

spherical silica gel beads, Silica gel Air Breather, Silica gel Air Breather

• Input Voltage: 110Vrms
• Output Voltage: 2.3 Volts
• Burden Resistance: 3.3Kv
• Turns Ratio: 48:1

Voltage transformers (VT), also called potential transformers (PT), are used for metering and are designed to present negligible load to the supply being measured . They have an accurate voltage ratio to enable accurate metering.VT1329 has the following specifications: 110 Vrms 2.3 V 3.3 k Ω 48 : 1 4.0 kV AC -10 ... +60° C Pin Terminals PCB  

• Enclosure: Closed Type
• Phase: Single Phase
• Input Voltage: 230V
• Winding: Toroidal
• Cooling: Oil Cooled
• Current Capacity: 20Amps
• Brand Name: Monarch controls
• Production Capacity: 1000 Units Per Month

We are specialized in the production and exporting of heavy duty Potential Transformer in the national as well as international markets. Potential Transformers are also known as Voltage transformers. The primary winding of the AC Potential Transformer is connected in the parallel with a circuit where the voltage of the system is to be measured or controlled. Our potential transformers are available with rugged construction that enables them for heavy duty performance. Further, we are reckoned as one of the ace Ac Potential Transformer Exporters from India. Features : Durable Strong and sturdy Rust free Dimensionally correct Types of Encapsulation : Enclosure (ABS/PC) Resin Cast

• Material: Copper
• Core Type: Ring Core Type CT
• Brand Name: Navago
• Features: Safe packaging, Easier maintenance

• Power: 2 amps
• Phase: Single Phase
• Brand Name: powertech
• Output Voltage: 12V TO 24V

• Frequency: 40-20,000 Hz
• Phase: Single Phase
• Input Voltage: 70.7 volt
• Secondary impedance: 4 or 8 ohms
• Power Source: Electric

• Efficiency: 98%
• Protection: HIGH VOLTAGE , LOW VOLTAGE , SINGLE PHASE and MOTOR PROTECTION
• Input voltage of 1KVA - 150KVA SINGLE PHASE: 170 V - 270 V
• Input voltage of 3KVA - 1,500KVA THREE PHASE (AIR/OIL COOLED): 340 V - 470 V
• OUTPUT REGULATION: +/-1%
• RATE OF CORRECTION: 70 V / Sec Ph-Ph
• CONTROL: MICRO PROCESSOR
• DUTY CYCLE: CONTINUOUS
• COOLING: AIR / OIL COOLED

Excelon cvt consists of buck-bust transformer ,whose secondary is connected in series with the main input and the load. The primary is supplied by an auto-transformer driven by a servo-motor. The motor is driven by a solid state sensing and control which senses output voltage.

Started our business operations as manufacturer, supplier, exporter and trader, we are engaged in offering TAP Position Indicator. Suitable for industrial environment, thee indicators are offered with potentiometer provision for trimming, in order to compensate the lead resistance. Apart from this, to ensure robust construction, these indicators are checked thoroughly. Features: Functional accuracy Precise reading Durable finish Details: Visual 7 segment digital display Onoff switch with lamp indication provided for power supply status Potentiometer provision for trimming to compensate the lead resistance Panel mounting with aesthetic value Robust & Rugged i.e. suitable for industrial environment Greater degree of accuracy & consistent reliability Specifications: Auxiliary Voltage 110 or 230 or 415V AC +15%, 50 Hz Resistance Tel-transmitter 1 kilo OHMS per step, 3 wire connection Display 1 to 99 positions 2 digit 7 segment LED display Accuracy Tolerance + 2% Lead compensation Trough a potentiometer adjustment in the front fascia Type of mounting Panel Mounting Operating temperature 0°C to 55°C Break down voltage 2KV, between all live terminal connected together and body for 1min Dimensions in mm 96 mmx96 mmx70 mm (Panel cutout size:90mmx90mm+0.1 -0.00) Applications: OLTC panel to indicate tap position

Used in areas or industries where very large spikes, noise or transients or harmonics have to be suppressed & to give a clean basically 1:1 transformer with galvanic isolation. It can also be used where extensive lightening occurs. A 100% solid state equipment with no moving parts and a life of over 25 years , Capacities vary from 1 KVA – 45 KVA in Single Phase.

• Capacity: 100
• Body Material: MS
• Winding Material: Copper
• Material: Copper
• Driven Type: Electric
• Cooling Type: Dry Type
• Operating Type: Manual
• Production Power: 2500
• Waveform Distortion: NA
• Usage: Industrial
• Feature: Distribution
• Hardness: NA
• Mounting Type: Ground Mounted
• Type: Power Transformers
• Weight: 5-10 Tons
• Frequency: 50 Hz
• Tensile Strength: NA
• Phase: Three Phase
• Efficiency: Greater Than 90%
• Warranty: 2 Year
• Cooling System: Air Cooling
• Country of Origin: India
• Enclosure: MS
• Relative Humidity: Less Than 90%
• Corrosion Resistance: Yes
• Energy Efficiency Level: 98%
• Max Ambient Air Temperature: 50
• CT Ratio: NA
• Class Of Insulation: F
• Coil Structure: Wound
• Tapping Range: +5 to -10%
• Maximum Ambient Air Temperature: 50
• Transformers: As desired
• Surface: Polished

• On Load Tap Changer: Two Earthing Terminals ,.and Lifting Lugs

We are highly established company engaged in manufacturing, supplying and exporting the highest quality Transformer, which is very important electrical machinery. While designing, manufacturing, testing and commissioning of these Transformer, we give utmost care to ensure complete satisfaction of the clients. Our range power distribution Transformers helps in converting low voltage into high voltage or visa-versa and accordingly the transformer is termed step - up or step-down. All Transformers manufactured by us work on the principle of electro-magnetic induction. In order to maintain our established quality trademark, we use refined raw materials and other kinds of modern machines

• Features: Ignition of oil and gas, High-performance and reliable ignition, Simple to use and installation, Robust enclosure for industrial use.

• Features: Accurate dimensions, Easy to fit, Ruggedness

• Material: Mild Steel
• Power: 2KVA
• Phase: ThreePhase
• Accuracy Class: 0.5
• Brand Name: Astron Electrik

We give utmost care to ensure complete satisfaction of the clients. Our range power distribution Transformers helps in converting low voltage into high voltage or visa-versa and accordingly the transformer is termed step - up or step-down. In order to maintain our established quality trademark, we use refined raw materials and other kinds of modern machines.

How safe your device would be if it were to purely run on the beast surge of Direct Current of electricity? Would you derive maximum utility from an Electrical appliance if it had to rely on the non-sustained charge of a couple of batteries? Regarded as one of the most influential electrical innovations of all time, E & I transformers have successfully almost reduced the safety concerns associated with alternating current to zero. Miracle’s E & I Transformers have the ability to do what is precisely required by them – lower the voltage exactly to a value that is required by the appliance and keep them running right and safe. Miracle Electronics’ E&I Transformers: Making the most of Electrical devices. Miracle Electronic’s E&I Transformers are extremely durable, come with superior wiring, varnishing, and connection terminators. Our E&I Transformers are indeed highly efficient and provide excellent regulation with minimal temperature rise. All our E&I Transformers are RoHS Compliant, High, and Reach Compliant. General Product Features & Inclusions CRGO core / CRNGO Round cores Cold Rolled Grain Oriented / Non Grain oriented steel cores Self Lead with Teflon PVC Cables Sleeves Connectors Thermal fuse Thermal switch Class B / F / H Insulation L Clamp / C Clamp / BOX Type Epoxy PCB Mountable Product Variants available: Range of 1 , 10, 20 , 25 , 50 ,100, 500 VA ,1 KVA and 5 KVA 20 KVA Air cooled 120 /240 V 1 Phase, 3 Phase 50 Hz – 60 Hz Miracle Electronics also undertakes requests for custom design and development of E&I Transformers. Please contact our Customer Support Team for more details.

We are one of the very few manufacturers of furnace transformers in India. These are very popular in the market due to its compact design, durability and efficiency. These are commonly used in induction furnaces. Furnace transformers are available in different sizes and capacities.

An Isolation Transformer is 1:1 ratio transformer. It has a copper foil shielding in between primary and secondary winding.FEATURES:It protects the output load from spikessurges or any other noise which occurs in the main supply.The spikes being high voltage transient should not be allowed to enter the load as it may damage the precious equipments.

We design and manufacture a wide range of SMPS Ferrite Transformers that is ideal for use in various industries such as Engineering and Electrical. The components used in these transformers are procured from reliable vendors to ensure defined quality standards. Further, we also follow a strict quality management program to ensure compliance with the international quality standards.

Bangalore based reputed manufacturer , supplier and service provider of a wide selection of excellent quality power & distribution transformers, air- cooled transformers, furnace transformers, etc...!!! We are highly established company engaged in manufacturing, supplying and exporting the highest quality Transformer, which is very important electrical machinery. While designing, manufacturing, testing and commissioning of these Transformer, we give utmost care to ensure complete satisfaction of the clients. Our range power distribution Transformers helps in converting low voltage into high voltage or visa-versa and accordingly the transformer is termed step - up or step-down. All Transformers manufactured by us work on the principle of electro-magnetic induction. In order to maintain our established quality trademark, we use refined raw materials and other kinds of modern machines.

As a leading firm, we are engaged in manufacturing and supplying Control Transformers that are offered at most competitive rates in market along with the facility of customization that enables our esteemed and highly respectable clientele to pick their desired or required option accordingly. We deliver our range within the committed time frame. Control Transformers are used to convert the electrical voltage to be suitable for the control panels. Control Transformers can be 1-phase or 3-phase solutions with or without enclosures.TS International manufacture 1-phase and 3-phase control transformers. The transformers can have multiple input voltages on the primary and secondary side or 2 or more secondary windings. Assembly of the transformer can be in vertical or horizontal to minimize the need of space.Features  dry type transformers 1-phase transformers 50VA and higher 3-phase transformers 50VA and higher Protection levels IP00 or IP23  Insulation class F/155°C (standard) or H/180°C Temperature rise class B, F (standard) or H 3-phase transformers 50VA and higher

Dry type Transformers, class 'H' insulated, have insulating materials which are with high dielectric strength and are capable to withstand high temperatures. The temperatures are generally made to comply with IEC-60076/IS-2026/IS-1171.Range up to 1600 KVA of 11 KV Class.   Advantages:     Use of non-biodegradable materials makes these suitable for strict   environmental conditions.   No fire or explosion hazards because of use of nonflammable   materials & absence of any liquid insulation.   Non-requirement of oil sump makes these ideally suitable for   installation near load centers thus reducing cabling costs and improving voltage regulation. Owing to adherence to International Quality norms and prompt customer services, VTST has an excellent brand image and an ISO 9001:2000 certified company with it’s headquarter in Bangalore (INDIA).     Zero Maintenance:       Drastically reduced maintenance and cleaner looks because of absence of any insulating liquid.   A lifecycle analysis would reveal the cost-effectiveness of Dry type Transformers in the long run   though these require higher initial cost.   Easy handling and access to active parts for inspection.   The Dry type Transformers are designed for required BIL values and are tested for dynamic short   circuit.

• Mounting Type: Indoor Panel Mounting
• Features: Less maintenance, Sturdy construction, Easy installation.
• Range: 11 kv, 22 kv & 33 kv
• Use: Used in power generation, power distribution, power transmission and other enterprise loads.

We offer tap position indicator. Designed to indicate the tap position of transformers 1-39 position user settable optional rs-485 modbus rtu communication