TS International Peenya, Bangalore, Karnataka

Our design is one of the top most product with high efficiency to provide a Sine Wave output voltage when driven from Variable Frequency Drives or other types of PWM inverters with switching frequencies from 2kHz to 8kHz. These filters are low pass frequency filters, which convert the rectangular PWM output signal of motor drives into a smooth sine wave voltage with low residual ripple. We, TS International are recognized as sine wave filter reactor manufacturers in Bangalore, India. Variable Frequency Drive (VFD) applications, Sine Wave Filters eliminate the problem of motor/cable insulation failures, heating, and audible noise. Sine Wave Filters also reduce electromagnetic interference (EMI) by eliminating the high dV/dt associated with inverter output waveforms.In Bangalore, with over 5 decades of experience in electrical domain, we have the expertise to design and manufacture sine wave filter reactor which are highly reliable, sturdily constructed, perfect on finishing, advance in technology, user friendly, effective to use and many more features. APPLICATIONS  For alternative energy applications, such as wind driven generators, where an inverter is used to return power to the utility distribution system through a step-up transformer, these filters meet the standards. 

DISCHARGE REACTORS Over 5 decades, we at TS International have been involved in manufacturing discharge reactors in Bangalore. Our range is known for its unique features such as: sturdiness, perfect finish, anti-corrosive, high grade raw material employed, durability, reliability, longer functional life and many such. Discharge Reactors satisfy the requirement for permanently connected discharging devices and for a discharge time of a few seconds. Bangalore based company called TS International is a dedicated manufacturers of discharge reactors with over 50 years. These reactors are known for their uses in different applications across varied sectors. We are renowned for best quality discharge reactor manufacturers in Bangalore, India.Features: Because of its high AC resistance Discharge Reactors generates extremely low loss during operation of the capacitor. When Capacitors are turned off there is very fast discharge over the low DC resistance . Fast discharge for fast reconnection of capacitors.  Reduced losses and Shockproof case for din rail mounting.We have developed a reputation as the most capable manufacturer of discharge reactors in Bangalore, India. We are committed to offer technically proven, reliable and world class reactors (detuned reactors, block reactors, and discharge reactors) by applying our rich domain expertise.We are the most preferred choice for discharge reactors manufacturers in Bangalore, India. As per the current trends, we keep upgrade our products. At present, we are the top manufacturers of all types of transformers, reactors and chokes in Bangalore, India. Moreover, we supply and export all our products to the most valuable clients all around the world.

ISOLATION TRANSFORMER Our technical team is engaged in manufacturing a wide spectrum of Isolation Transformer, ultra Isolation Transformer and electrical Isolation Transformer that is meant for protecting the sensitive equipment from spikes , surges and noises. These are manufactured using superior quality raw material and are known for their capacity to alter the frequency. The range is widely useful for DVD’s, computers and CNC machines. We customize and manufacture upto 2000KVA as per clients requirements.   Features  The AC Isolation Transformer has been created with split winding structures and bifilar linkages to lessen the over all capacitance of the winding. The usage of high isolating substances and special defending procedures result in easing out the common mode and reducing transverse mode noise. 

DETUNED REACTORS Since 5 decades, TS International is a well recognized company for detuned reactors manufacturers in Bangalore. Detuned reactors are specific three phase inductors dedicated to attenuating the amplification of harmonics on highly polluted networks and to protecting the different components of the installation. These are used in series with capacitor banks in power factor correction units.   By using these types of detuned reactors it is possible to avoid following negative effects on system. Choosing the correct detuned filter reactor and capacitor value on detuned power factor correction systems is very important. To obtain optimum performance form a detuned power factor correction system following criteria must be controlled and met during the pairing of the reactors and capacitors.   We have built an enviable reputation for outstanding quality detuned reactors to diminish or eliminate the harmonic that are present in the electrical system. We manufacture detuned reactor in tune with the international standards. Today, TS International is recognized as one of the leading manufacturers of detuned reactors in Bangalore, India.   Applications: In Bangalore, we have well-equipped manufacturing unit with modern processing and quality testing facilities. Our thorough understanding of different applications of detuned reactors enables us to manufacture to any specification you may require and hence we are noted as the best detuned reactor manufacturers in Bangalore, India.   Better impedance behaviour of mains supply. Protection of capacitors against harmonics and improvement of systems power factor Protection of switchgear and contactors used in capacitor panels.   Technical Data Specification :   IS-5553-1990/IEC – 60289 (1988)   Range :   Output up to 100KVAR   Filter factor 7%,14%   Rated voltage -440V.550V.690V   Type :   Detuned, copper wound-iron core dry type    Features: Detuned reactors are widely utilized across a broad range of sectors and are highly appreciated for their precise fabrication, sturdiness, robust construction, reliability, longer service life and superior performance.    Linearity more than 160%.  For Triplen and Non-Triplen Harmonic suppression though PF Capacitors.   Copper wound reactors with 150% continuous RMS rating with 100% current THD-F factor.  Line Voltage for series combination of Reactor & capacitors : 380V, 415V, 433V, 440V , 690V AC.50Hz   Current : Continuous RMS value: 150% of the rated current.   Winding : Electrolytic grade copper winding.  Operating ambient temperature -10 to +50 Deg C.  Supply frequency : 47Hz to 53Hz.  Coil wound with multiple conductor to reduce skin effect.  Gives harmonic free supply to your equipment's :  Mechanical sturdy design to withstand vibrations keep low noise level and.   ensure performance guarantee.   Noise level less than 60dB at rated load.

We are the Bangalore's leading manufacturers and suppliers of a wide range of high-quality(encapsulated) DC chokes. Our DC chokes are available in wide range of currents-10A to 5000A for use in extreme environmental conditions.This allows for much smaller filter component values than used for 50/60Hz mains supplies. Since the DC flux does not generate core loss, the primary concern is saturation and copper loss. For this reason an iron powder core is often used. CURRENT RATING:10A - 5000A  Power range : upto 1000KW.We at TS International are the premium quality DC chokes manufacturers in Bangalore, India. DC chokes helps in protecting the DC load from high voltage current and thereby ensures the hassle free performance. The complete range of DC chokes which we manufactures in Bangalore are made up of top-notch raw materials. These are widely used in diverse industrial applications for its features like: simple to use & operate, longer functional life, high durability, compact design, reliability and etc. DC-LINK REACTORS The purpose of a DC-link reactor is to reduce the harmonic currents on the DC side of the converter and to reduce the risk of commutation failures by limiting the rate of rise of the DC line current at transient disturbances in the AC or DCsystems. Small losses and small size and weight in relation to capacity are typical features for smoothing reactors. We are known as DC-link reactors manufacturers in Bangalore, India.Key features  Single phase reactors : Power range : upto 1000KW Inductance tolerance : 0%+10% Insulation class : Standard F (155°C) Protection class : Standard IP00 Manufacturing standards : IEC76, IEC289

As a leading firm, we are engaged in manufacturing and supplying Control Transformers that are offered at most competitive rates in market along with the facility of customization that enables our esteemed and highly respectable clientele to pick their desired or required option accordingly. We deliver our range within the committed time frame. Control Transformers are used to convert the electrical voltage to be suitable for the control panels. Control Transformers can be 1-phase or 3-phase solutions with or without enclosures.TS International manufacture 1-phase and 3-phase control transformers. The transformers can have multiple input voltages on the primary and secondary side or 2 or more secondary windings. Assembly of the transformer can be in vertical or horizontal to minimize the need of space.Features  dry type transformers 1-phase transformers 50VA and higher 3-phase transformers 50VA and higher Protection levels IP00 or IP23  Insulation class F/155°C (standard) or H/180°C Temperature rise class B, F (standard) or H 3-phase transformers 50VA and higher

BLOCK REACTORS For over 50 years, we have been well-known for block reactors manufacturers in Bangalore, India. Blocking Reactors are used for reactive power compensation. Their main function is to protect the capacitor unit from the excessive level of power harmonic in the electrical network. Small losses and small size and weight in relation to capacity are typical for Blocking Reactors. Features: Inductance tolerance : ±3%. Serial numbering : Each reactor is tested and approved in compliance with the relevant requirements.  Outlets : Standard aluminium /copper bus bars. Protection class : standard IP00. Block reactors are designed and manufactured to suit different applications in varied sectors and known for its attributes like: excellent durability, superior performance, easy installation, rust proof body, shock-proof, low noise, high resistance to harmonics, very low losses and etc.Our offered range is basically used for the purpose of saving power. Block reactors which we manufacture are widely demanded for reducing, blocking and providing low impedance path for the harmonic currents in varied electrical systems. We at TS International are the specialized manufacturers of top graded block reactors in Bangalore. Moreover, we are also recognized as detuned reactors and discharge reactors manufacturers in Bangalore, India.

AC CHOKES We are the AC chokes manufacturers in Bangalore, India. Yes, we provide advanced AC Chokes that provide hight levels of performance and withstand the toughest of conditions at all times. These chokes save about 50% of electricity as compared to the regular chokes and are easy to install.The chokes are light in weight and guarantee a longer tube life. With easy maintenance and affordable pricing, these chokes are gaining popularity. Our clients can avail from us an assortment of AC Chokes that is fabricared using premium quality raw material and is widely appreciated for its hight performance and durability. The important features of AC Chokes: Long fuctional life  Safe to Use  Compact design  High performance  Overload capacity We T. S. International provide highest rated and technically advanced AC chokes. We are noted as one of the prominent company for ac chokes manufacturers in Bangalore, India. Since our inception in Bangalore, we have been able to meet the diverse requirements of the electrical industry and accordingly modify our entire range of transformers, reactors, and chokes from time to time, so that they meet the specifications of our clients to the maximum