Water Well Drilling Equipment Dealers in Chikkabanavar, Bangalore (55 products available)

Our Twin Rough Boring tools are very economical .They are easy to set the required diameter & saves a lot of time in machining . The tools also save tooling cost . If used before finishing operation it gives a consistent bore stock for finishing thus improving the quality of finish boring . The tools are made of good quality tool steel & heat treated .The L/D ratio is designed to avoid vibrations during machining.

Country of Origin : India

Type : Vertical Boring Machine

Warrenty : 1year

We manufacture a wide series of highly durable and economical Fine Vertical Boring Machine. Our product has been designed and developed after thorough research work and market studies. Vertical Boring Machine offered by us is known for the below advantages:   Sturdy structure Smooth functioning Low maintenance Longer functional life

Distance Between Spindle Center to Vertical Guideway : 175mm

Table Size : 1370x360mm

Spindle Taper : Iso50

Spindle speed : 58-1800 Rpm

Table Travel : 800 (750) X300mm

Overall Dimensions : 1900x1720x1750mm

Universal Milling and Boring Head The Precitec UABMH-150 attatchment is specially designed for heavy duty horizontal moving column boring machines which can take heavy attatchment. the unit facilities various activities like milling, boring, drilling etc ate any given angle. for this unit has a provision for alignment of the head in any direction (Universal). The best part of the unit is,it has an additional quill movement of up to 250 mm after titling to any angle. This facilities easy drilling, boring, tapping, reaming etc. in the required angle without having to tilt the job . This movement can either be manual or power fed for boring. Hence this unit becomes a must for all the floor boring machines greatly enhancing their machining capabilities.

We have a spacious warehouse that is well designed and properly maintained wherein the entire range is securely stored. Our unit is installed with all required amenities essential for safe storage. Capitalizing on an efficient industrial network, our organization has made coalitions with numerous reputed logistics solution sources. Thus, we can ensure on time distribution of consignments.Optional Accessories : Boring Spindle Dia 36, Dia 46, Dia 75, Head Dia 120 & Dia 140 V' type Cylinder block Clamping Fixture Control Signal Tower Light DRO System (3 Axis) Undependable Feed Variable Motor Control Touch Screen Depth Measuring Device Two Wheeler Clamping Device Quick Clamping Device Tool Grinder Main Features : Well balanced and rigid design Base, column, cross slide, table and gear box are of fine grind alloy casting, stress relief after rough machining ensures rugged and vibration free operation of the machine Spindle speed and feed combination to achieve better surface finish and fast boring operation Job facing and chaffering controlling fine feed hand wheel located on the right hand side of the boring head for easy operation Tappered gibs used for gear box fixing alignment, for avoiding vibration and achieve better boring accuracy Auto stop of spindle rotation and rapid return of boring head after completion of boring operation is depending up on of the setting of jobs In case of power variation MCB will be tripped off automatically Push button switch starter on the working side of machine Gear box and cross slide guide always fully covered by below and metal covering In the time of setting of bore center, the reading will be automatically displayed on the dial

Voltage : 415V

Dimension(L*W*H) : 3000*1500*1900

After-sales Service Provided : Engineers available to service machinery overseas

Certification : IEC

Lead Time : 45 Days

Warranty : 12 Months

Supply Ability : 1 Piece/Pieces per Month

Place of Origin : Karnataka, India

Rated Power : 10KVA

operation : pipe boring, facing, chamfering

We are engaged in manufacturing and exporting of superior quality multifunctional portable line boring machines. Our range of Boring Machine caters to the requirements of various industries such as engineering, automobile, construction etc. Further, these portable boring machines are manufactured using highest quality raw material which are procured from trusted vendors and are known for their robust design, high performance and low maintenance. Our boring machines are offered in various technical specifications to meet the customer's specific requirements and demands. Our machines are exported to USA, Germany, Italy, Brazil, UK, Canada, Australia, South Africa, UAE, Saudi Arabia, Denmark, Dubai, Kuwait and many other countries across the globe.

We are one of the leading traders and suppliers of Collet jig boring machine

Features Holytek brings you a world of practical, efficient technology with high productivity and flexibility above and beyond what you’ve come to expect.  Our current line-up sports an array of features to meet the most stringent boring requirements.  This expanded range of models allows you to choose from both solid wood and panel line boring functions with the finest attributes and excellent value – all at reasonable prices.

Back Boring Tools are a combination of Back Boring, Facing & Chamfering tools which are custom built for specific applications. They are developed with Rhomboidal & Triangular inserts with Screw-on Type Clamping.

We Offer Liner Boring Machine is equipped with LM Guides, servomotors, HMI and hydraulic Clamps. This machine can gives a high rate of production

This machine chamfers the bore on connecting rod’s small end. The client used to do this machining operation on an VMC, which was a time consuming process. In order to reduce the time and deliver an output of 4 component every 20 seconds, we proposed a pendulum type loading unloading concept. Basic features and sequence of operation is given below: FEATURES & SPECS: Rigid, stress relieved and fabricated structural. Atop the base, two fixtures are mounted side by side along the length. Each fixture has hydraulic clamping and can hold 4 components at a time. Adjacent to these fixtures, a servo driven longitudinal slide is mounted with approximate slide stroke of 600mm. Atop this slide a chamfering head with servo driven vertical movement is mounted. The chamfering head will be mounted with a chamfer tool. The chamfering head, at start of each cycle, will be positioned at the center, in between the fixtures. The machine will be provided with a recirculating coolant system. The machine will be provided with complete machine enclosure. LM guides will be used for slideways. Machine will be provided with centralized lubrication system for sliding surfaces. Machine will be provided with touch panel HMI, for easy parameter setting of feed and positions. SEQUENCE OF OPERATION: Load the component onto one of the fixture and press auto-cycle. The components at 1st fixture get clamped. The longitudinal slide moves the unit head top the 1st component of the 1st fixtures and vertical head plunges the chamfer head into the component to chamfer. The chamfer head then retracts and moves to the next component and repeats the above steps for the rest of the component. While chamfering is going on at the 1st fixture, the operator has to load components onto 2nd Now after chamfering components at 1st fixture, the chamfer head returns home and stops inbetween two fixtures. The operator has to press-autocycle. Steps 2 to 5 is now repeated at 2nd fixture, while the operator unloads chamfered component and loads new component at 1st

We are engaged in making available feature packed Water Well Drilling Rig. Water Well Drilling Rig, offered by us, is highly acclaimed for its cutting edge performance in Water Well Drilling. We make use of premium grade components in fabrication of Water Well Drilling Rig, that we provide. This Water Well Drilling Rig is known for its high performance. Product Description Description : JCR – 600 DTH Rotary combination Drill Rig mounted on 6 X 4 carrier truck with top head drive, Hydraulics driven by Deck Engine, capable of drilling 500 Mtrs.Capacity : The rig is capable of drilling 300mm dia hole in overburden by Air RotaryDTH drilling to a depth of 120 mtrs in softunconsolidated formation and 150mm–165mm dia hole to a depth of 600 mtrs by DTH method in hard rock and abrasive formation.Direct Rotary Drilling : 311mm (12 ¼”) dia hole by mud rotary (Direct Rotary) method by reaming in alluvial sandy, soft medium and collapsible formation upto depth of 500 mtrs. Note : Above drilling capacities are possible under favourable drilling conditions only. Mast : The mast is of Box type structure and made of heavy duty welded construction, reinforced with suitable cross members, capable of withstanding all types of drilling loads. The Mast is capable of handling 6 mtrs (20’) long drill pipe and 6mtrs long casing pipe. The rig is provided with the level indicators for proper leveling. The mast is raised and lowered by means of suitable capacity hydraulic cylinders. The Mast is equipped with sufficient lighting arrangements to help night drilling.Top Drive Rotary Head : Hydraulically operated top drive rotary head powered by two Hydraulic motors and having variable speed range of 0-150 rpm and capable of giving a torque of about 60,000 in-lbs. Suitable arrangement is made on the rotary head to absorb shocks while drilling and also to avoid damage to drilling pipespindle tool joints (threads).Mud Swivel : A separate airmud swivel is provided to prevent the accidental entry of airmud in rotary head. Feed System : Heavy duty, high strength, hydraulic cylinders are provided to accommodate 6 mtrs (20feet) long drill pipes and to handle 6Mtrs casing pipes. The pull back is of about 17438 kg and the pull down capacity to be 10232 kg. The feed system is actuated using hydraulic cylinder and wire rope system. The feed system incorporate arrangement to control and limit weight on the drilling Bit. Rapid and slow feed speed arrangement is provided to measure the down feed and hold back pressure of the system.The pull backHigh speed up-about : 7 MtrsMinHigh speed down about : 12 MtrsMin

Type : Deep Hole Grinding Spindles

Material : Stainless Steel

Application : Grinding Use

Color : Silver-grey

Condition : New

Application : Boring

Feature : High Performance, Rust Proof

Motor rpm : 2800 rpm

Net weight : 30 kg

For re sharpening of cutting edges of tools used in machines like Line Boring, Cylinder Boring, Valve seat Cutting and others by grinding and lapping to correct angles with required clearances. Separate wheels for grinding and lapping.

Backed with industrious professionals, we keep a stern check on the products to ensure that the range is commensurate to international norms. Sternly packed and delivered safely to the customers' provided address and that too in the committed time span.

Rated Power : 10KVA

Brand Name : Brisk tech

Condition : New

Certification : IEC

Weight : 2300

Voltage : 415V

operation : pipe boring, facing, chamfering

Warranty : 12 Months

Dimension(L*W*H) : 3000*1500*1900

Model Number : PIPE BORING MACHINE-BTEL 1500

Material : HSS

Country of Origin : Made in India

Color : Silver

Features : Elevated durability , High strength , Strong construction

Brand/Make : Omicron

Size : Customize

Weight : 300 kgs

Voltage : 420V / 50C / 3P

Overall Dimension : 1200 x 900 x 1350 mm

Maximum Drilling Diameter : Max 35 mm, D. 13 mm

Maximum Drilling Depth : H Max 60 mm

Total Number Of Drilling Shafts : 21

Installation Pitch Of Drilling Head : 10 mm

Spindle Speed : 2840 rpm

Air Pressure : 5

Total Power Of Motor : 1.5 kw

Machine Name : Floor Boring Machine-CWB - ALF 147,5

Manufacturer : Innocenti

Model : CWB - ALF 147,5

Country : Italy

Stock-no. : S02032113

Travels x 6500 mm y 3000 mm Boring Spindle diameter 150 mm Milling spindle diameter 204 mm Spindle taper SA 50 Spindle speed 2,6 - 640 rpm Spindle travel 1500 mm Ram travel 750 mm Total Ram + Spindle 2250 mm Spindle motor 30/40 HP Distance between Spindle-Floor Plate mini/maxi 870/3870mm Ram Type Floor Boring Accessories: 4 Axis DRO Face plate 1 milling heads Rotary table 2000 x 2000 mm / 15 tons load cap. Floor plates 2500 x 8000 mm