Zeus Controls Pvt. Ltd. Hosur, Bangalore, Karnataka

ZEUS presents PTR_0X , a very stable, reliable and optically isolated Timer which has 4 digit Timer which is fully programmable. This can accept different type of inputs like NPN-proximity switch, PNP-proximity switch, infrared sensors, magnetic sensors or contact closers. The different ranges can be programmed with OFF delay/ON delay and this can be used as a cyclic timer (equal time / unequal time). This timer can be used in different modes like power ON start, start with external trigger, keep start till external trigger is available & it goes off when trigger is removed, Timer stops and it restarts when trigger (input) is available again. Feature Fully programmable. Optically isolated inputs and outputs. Auto / manual mode available. Programmable ON delay / OFF delay. Different type of input can be configured. Cycling Mode possible. Isolated input (External Trigger) Application For all process control application To Control Time Base Application.

Country of Origin : India

Type : Digital Timers

Length : 10-15cm

Display Type : Digital

ZEUS presents PSI_01, a very stable, reliable and optically isolated Speed Indicator which has 4 digits as indicator which is fully programmable. This can accept different type of inputs like NPN/PNP-proximaty switch, infrared sensors, magnetic sensors, contact closers. This inputs can be scaled with multiplying and dividing factors. This Speed Indicator can be used as RPM indicators, Meter per Min(MPM) Indicator or no. of counts per minute etc. Feature Fully programmable. Optically isolated inputs and outputs. For speed indication auto sampling time. Programmable input scaling. Different type of input can be configured. Application For rate of Production Indication. Speed Indication. R. P. M. Indication.

Zeus presents a latest technology Micro controller based dedicated Singale Channel Open loop (% Output based) Controller which can be use as a nozal / manifold Temp. controller where sensor fixing is not possible The SCR output (optional) can be used in Vibrator controller for packaging Industry. This has a 2 set (PV & SV) of 3 digite 7 segment display with 4 keys. Feature 1 Channel Thyristor 2 A (Traic) output (Thyristor external optional) Linear output Digital setting 2 set (PV & SV) of 3 digite 7 segment Display User Friendly Size : 48 mm x 48 mm x 110 mm Application Heater Control Power Control Fan / Light Control Plastic Industries (mold heater) Packaging Industries Models Single Zone open loop controller for phase angle control output (2 Amp. at 230V AC) Size 48 x 48 x 110 mm – (DEOL_01)   Single Zone open loop c ontroller for phase angle control output (Thyristor / Traic external) Size 48 x 48 x 110 mm – (DEOL_01TW)

ZEUS presents PCR_0X, a very stable, reliable and optically isolated counter which has 6 digit single counter which is fully programmable. This can accept different typr of inputs like NPN-proximaty switch, PNP-proximity switch, infrared sensors, magnetic sensors, encoders or contact closers. This inputs can be scaled with multiplying and dividing factors. This counter can be used in UP counting made, Down counting mode, UP-DOWN counting mode. It has got relay operations and relay outputs which are fully programmable for different conditions as explained further in manual. This can be used as a small PLC for different applications like batching, Counting, printing, etc. Feature Fully programmable. Optically isolated inputs and outputs. 3-different output modes (count less than set value, more than set value and l to set value.) Auto / manual mode available. Programmable input scaling. Different types of inputs can be configured. Application For production counting / measuring Batching.  

Zeus presents a latest technology Micro controller based dedicated 4 Channel PID Controller which can be use as a Multipoint Controller or Humidity Cum Temperature Controller. This has a 2 line16 character LCD display with 9 keys, 8 Digital Output and 4 Analog (Differential ) Input. Feature Multipoint Output Control (Heat): SSR (24V DC), Relay (relay card to be put extra) Or 4 to 20mA (optional) Output Alarms : 4 Nos. ( one each for each channel Programmable(16 modes of Alarms of each channels.)) Output Alarms : Alarm output common: 2 nos. 24V Dc Output(SSR) 1 for interlocking & 2 for O/P short/ open & sensor short/open Alarm. Analog Input : 4 numbers universal (incase of temperature with Linearization) it can accept Thermocouple, RTD & Linear (4 to 20mA, 0 to 10V or 0 to 5V)(selectable) Resolution: 16 bit/± 0.1°C Communication: RS 485/ RS 232 Mod bus RTU communication. Application Plastics Rubbers Chemicals Textiles Furnaces Heat Treatment Pharmaceuticals R & D Laboratories

Zeus presents a latest technology Micro controller based dedicated 4 Channel Open loop (% Output based) Controller which can be use as a nozal / manifold Temp. controller where sensor fixing is not possible The SCR output (optional) can be used in Vibrator controller for packaging Industry. This has a 2 line 16 character LCD Display with 9 keys . Feature 4 Channel Thyristor 2 A (Traic) output Linear output Digital setting LCD 2 lines 16 Character Display User Friendly Size : 96 mm x 48 mm x 110 mm Application Heater Control Power Control Fan / Light Control Plastic Industries (mold heater) Packaging Industries

Zeus presents a latest technology Micro controller based dedicated 8 Channel, Open loop (% Output based) Controller which can be use as a nozal / manifold Temp. controller where sensor fixing is not possible  The SCR output (optional) can be used in Vibrator controller for packaging Industry. This is available whith display & keyboard OR only RS 485 / RS 232 communication. Feature 8 Channel Thyristor 2 A (Traic) output / SCR output (optional) can be used in Vibrator controller for packaging Industry Linear output Digital setting 4 Seven Segment LED Display User Friendly Card Type Application Heater Control Power Control Fan / Light Control Plastic Industries (mold heater) Packaging Industries

ZEUS presents DSC-0X a very stable reliable synchronize clock with status indicator for Pharmaceutical Industries, Hospitals and warehouses. This is required in FDA approval under 21CFR part- 11 rule. This is an intrinsically safe housing in SS304 enclosure which can be concealed in the wall. Available in three different models. Master and slave arrangement with status indicator. Only synchronize clock with master and slave. Synchronize clock to be opted through computers RTC. Feature Master timing is tamper proof setting; it can be done only through password. Slave communicates with master and opted as per master. 24volt pluses input for alarm status. Input supply 24volts AC/DC or 5volts AC/DC. Applications Pharmaceutical Units Hospitals School&college Industries Overview Synchronize clock is enclosed in SS. enclosure with weather proof enclosure which can be concealed. These clocks can only be programmed through password because law required it should be temper proof.

Zeus presents a digital pot / pulse width to analog output (voltage) Controller, which is very stable, reliable and optically isolated. Feature Optically isolated inputs and outputs. External PWM (Square wave) Input. External inputs for up and down key. Application It found use in AC/DC Drives,PLCs, Thyristorised Temperature Controlling, Power Controlling etc.

ZEUS Data Logger is a State-of-Art with a latest technology micro controller based instrument & finds use for monitoring, storing and getting hard copy of different process parameters like temperature, pressure, conductively, pH, Rh, current, voltage etc. This record can be used for analyzing the yield of the plant as per variation in plant parameters. It can also give a common programmable (16 mode) alarm output or individual programmable (16 mode) alarm outputs. The data logger has programmable universal input having linearization for all temperature sensors/ RTD and can also accept 4 to 20 mA, 0 to 10V as input. It can also have RS 232/ RS 485 port, which can be used to connect with PCs/ PLCs. The Data Logger can also be connected to Dot Matrix / DeskJet / Lesser printer using Centronics Parallel Port (optional). Feature Parameter of different channels with channel no. and the unit of measure is displayed/ recorded or printed. Manual scanning of channel is possible through scan and hold key. Print / recording interval programmable. Automatic Ambient Temperature compensation for thermocouples. Auto /Manual printing facility. Real time displayed. Optional individual programmable alarm (16 modes). All type of thermocouple user selectable at site. 4 to 20 mA, 0 to 10 V DC full scale range of 0 and span are field programmable by user. Very high accuracy better then 0.5% with software linearistion to get Constant accuracy over full range. Temp. Sensor break or open indication, under & over range indication for 4 to 20mA, 0-10V I/P available. Field programmable channel scan time. Very compact in size, easy to handle & install on field. Individual channel skip and hold facilities. Optional RS 485 /RS 232 port for computer interface. Optional centronics parallel port for dot matrix printers. Common audio alarm (Buzzer is provided). Hystersis: 1 to 99 unit programmable for alarms. Optional online data acquisition computer software available. Optional Higher memory(4000 records) available. Online data acquisition computer software available.  

"DAA" controller series is designed and manufactured by ZEUS, It has features of advanced technology, high quality etc. All injection molding process of this controller is centralized and controlled by Prosessor. It provides quick action, high efficiency, power saving, safety and reliability. For the purpose of using and better maintenance of this machine, this operation manual will provide detail information and instructions as well.    

ZEUS presents PCR_0X, a very stable, reliable and optically isolated counter which has 6 digit single counter which is fully programmable. This can accept different typr of inputs like NPN-proximaty switch, PNP-proximity switch, infrared sensors, magnetic sensors, encoders or contact closers. This inputs can be scaled with multiplying and dividing factors. This counter can be used in UP counting made, Down counting mode, UP-DOWN counting mode. It has got relay operations and relay outputs which are fully programmable for different conditions as explained further in manual. This can be used as a small PLC for different applications like batching, Counting, printing, etc. Feature Fully programmable. Optically isolated inputs and outputs. 3-different output modes (count less than set value, more than set value and l to set value.) Auto / manual mode available. Programmable input scaling. Different types of inputs can be configured. Application For production counting / measuring Batching.

ZEUS presents PCR_0X, a very stable, reliable and optically isolated counter which has 6 digit single counter which is fully programmable. This can accept different typr of inputs like NPN-proximaty switch, PNP-proximity switch, infrared sensors, magnetic sensors, encoders or contact closers. This inputs can be scaled with multiplying and dividing factors. This counter can be used in UP counting made, Down counting mode, UP-DOWN counting mode. It has got relay operations and relay outputs which are fully programmable for different conditions as explained further in manual. This can be used as a small PLC for different applications like batching, Counting, printing, etc. Feature Fully programmable. Optically isolated inputs and outputs. 3-different output modes (count less than set value, more than set value and l to set value.) Auto / manual mode available. Programmable input scaling. Different types of inputs can be configured. Application For production counting / measuring Batching.  

Zeus Presents a latest technology micro controller based and dedicated Auto Clave Unit which can bewidely used in microbiology, medicine. A notable growing application of autoclaves is in the pre-disposal treatment and sterilization of waste material, such as pathogenic hospital waste. Machines in this category largely operate under the same principles as the original autoclave in that they are able to neutralize potentially infectious agents by utilizing pressurized steam and superheated water. Autoclaves are also widely used to cure composites and in the vulcanization of rubber. The high heat and pressure that autoclaves allow help to ensure that the highest possible physical properties are repeatably attainable. Feature Digital Output( 24v) : 2 Nos . 1) for Heater 2) for Solnoid Digital Input ( 24v) : 2 Nos – Low water Level , Start trigger Analog Input : 1 No ( Thermocouple , Rtd , Linear) Level Warnings Settable Sterlisation Time and Temperture Sterlisation temp and Time Indication on LCD Preperation or Preheating Stage Indication