ISO Certification Services

Why you would need ISO 450001 Certification ISO 45001 is a standard to prevent work-related injury and ill-health and to provide safe and healthy workplaces.   As an international standard, ISO 45001 crosses geographic, political, and commercial  boundaries. This sets a benchmark standard for the management of occupational health and safety. If your organization operates or trades internationally, you can work to a single standard rather than separate standards in each country, which can simplify your business.   The process As an organisation, the steps involved for you are:   Applying for certification: Review and accept our customised Proposal, and you’re underway! Achieving certification: Firstly, a pre-certification audit or “test run” will be conducted either on-site (at your premises) or off-site (at our premises) or both, to see whether your management systems are suitable. Areas of concern will be reported. Once concerns have been actioned, an on-site certification audit will be conducted, where we will examine the extent to which you address the program criteria. Areas of concern will be reported. Once we are satisfied there are no outstanding issues that present an unacceptable risk to you, your employees, customers, regulators, Equal Assurance or others, we can proceed to issue a Certificate of Confidence. Well done! Maintaining certification: Depending on the level of risk, we will conduct a series of surveillance audits (and in some cases special and follow-up audits) and tri-ennial re-certification audits, to examine the extent to which you continue to address the program criteria. Areas of concern will be reported. So long as we continue to be satisfied there are no outstanding issues that present an unacceptable risk to you, your employees, customers, regulators, Equal Assurance or others, your certification remains valid.

• ISO 17020 Accredited Inspection Agency: ISO 17025 Accredited Testing Laboratory

Iso 9001:2015 sets out the criteria for a quality management system geared towards companies who need to demonstrate their ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements. This standard is based on a number of quality management principles, which will allow organizations to enhance customer satisfaction and achieve top operational performance of internal and external processes through the upcoming fifth revision to iso 9001 provides further opportunity for organizations take stock of their current practices and use standards as the basis for the development of a business management system, to unlock the untapped value within their develop, maintain and support products* that enable organizations worldwide to improve their performance by establishing generic qms requirements providing guidance and support.

• Country of Origin: India
• Certification: ISO 17712
• ISO 17020 Accredited Inspection Body: ISO 17025 Accredited Testing Laboratory

CDG is an ISO 17021 accredited inspection body & ISO 17025 accredited testing laboratory for ISO 17712 standards. We provide accredited ISO 17712 certification services in Chennai.CIL provide ISO 17712 certification in India. CIL is an accredited certification in India. CIL is a supplier of high security seals for, amongst others, shipping containers and trailers. All our security seals are ISO 17712 certified. In this blog we will explain what ISO 17712 means. The International Organization for Standardization (ISO) is the global leading developer of voluntary international standards. ISO creates documents that provide requirements, specifications, guidelines or characteristics that can be used consistently to ensure that materials, products, processes and services are fit for their purpose. There are standards for a great variety of products, processes and services and ISO 17712 is a standard for security seals. ISO 17712 FOR SECURITY SEALS This ISO standard documents uniform procedures for the classification, acceptance and withdrawal of mechanical freight container seals. ISO 17712 defines 3 types of classes of security seal strength: “I” for indicative, “S” for security and “H” for high security, where H has the highest strength, also known as barrier capacity. Security seals has to be tested by an independent third-party laboratory to validate the security seal’s classification. The test laboratory must be accredited according to ISO 17025 for testing specific to ISO 17712. The ISO 17712 standard requires independent testing against three main categories: Security seals must be tested to determine its physical strength. Seals must be designed and constructed with tamper indicative features that generate tell-tale evidence of tampering. Manufacturer’s security-related business processes must be audited. More information and details about ISO 17712 can be found in ISO’s official documentation. CTPAT APPROVED SECURITY SEALS Customs Trade Partnership Against Terrorism (CTPAT) is but one layer in U.S. Customs and Border Protection’s (CBP) multi-layered cargo enforcement strategy. Through this program, CBP works with the trade community to strengthen international supply chains and improve United States border security. CTPAT is a voluntary public-private sector partnership program which recognizes that CBP can provide the highest level of cargo security only through close cooperation with the principle stakeholders of the international supply chain such as importers, carriers, consolidators, licensed customs brokers, and manufacturers. In order to verify that a High Security Seal is certified as ISO 17712:2013, contact your security seal supplier and ask them to submit the ISO certificates mentioned: The manufacturer of the seal has to be ISO 9001 certified. The manufacturer of the seal has to be ISO 17712:2013 Annex A (Best Practices) certified. The mechanical strength of the seal has to meet or exceed the requirements of ISO 17712 Clause 5 High Security Seal category. This is documented by a ISO 17712:2013 “H” laboratory report / certificate for the seal. ISO17712: 2013 Clause 6 Tamper Evidence Compliance Letter The test laboratory performing the strength tests must be ISO 17025 accredited to perform ALL 5 mechanical tests according to ISO 17712:2013 Clause 5.

Our ISO 14855-1:2012 Certification Consultancy Service ensures a streamlined process for environmental biodegradability testing. Our expert consultants guide your organization through the certification requirements, offering comprehensive assistance in protocol implementation, documentation, and audit preparation. We focus on aligning your practices with ISO 14855-1 standards, emphasizing environmentally responsible practices. Our service encompasses detailed training sessions, documentation review, and continuous support to guarantee a successful certification process. By choosing our consultancy, you gain a partner dedicated to enhancing your environmental footprint and ensuring compliance with ISO 14855-1:2012, fostering a commitment to sustainable and eco-friendly practices within your business.

ISO 9001 is also called as a complete business standard that reduces various risks and enhances overall profitability and also strengthens organization and customer relationship. Implementation of management system w.r.t. ISO 9001 standard requirement make every organization, small or big, a profit making centre in long run.  

We are providing fast, effective & economical iso certification. We are one of the leading iso consulting organizations. We render unbeatable iso certification consultancy for iso 9001 qms, iso 14001 ems, ohsas 18001, iso 13485,ce marking, isms 27001, iso 13485, ce marking, iso 50001, ts 16949, iso 28000, fssc 22000, organic certification, c-tpat, itsm 20000, iso 27001,haccp, iso 22000, brc & other food certification and sa-8000, sedex, bsci consulting services, etc.

ISO 27032 Cyber Security Certification focuses on protecting online information from cyber threats and securing cyberspace. This certification provides a framework for managing and improving your organization's cybersecurity posture, addressing risks related to internet-based threats such as hacking, phishing, and malware. Our certification services guide you in implementing best practices for cybersecurity, ensuring that your systems and data are secure. By achieving ISO 27032 certification, you demonstrate your commitment to safeguarding sensitive information, enhancing stakeholder confidence, and mitigating the risks associated with cyberattacks. Partner with us to fortify your cybersecurity defenses and achieve ISO 27032 certification with expert support.

• Certification Type: IIP Certificate and UN Certificate as per IMO IMDG Code & IATA ICAO
• Delivery time: 10 to 35 Working Days
• Mode Of Payment: Advance via Bank Transfers
• Mode Of Service: Online
• Service Location: PAN India
• Type Of Services: IIP Certification Consultancy
• Mode of Report: Digital
• Document Required: GST, Packing List, Package Specifications, MSDS, Mode of shipment, Manufacturer & Exporter details
• Brand: IIP
• Brand: UN
• Type: Online

Our ISO 27001:2013 Certification services help businesses protect sensitive information and ensure robust information security management. ISO 27001:2013 is an internationally recognized standard that provides a framework for establishing, implementing, and maintaining an Information Security Management System (ISMS). We guide your organization through the certification process, including risk assessments, policy development, and compliance audits. Our experts work with you to identify potential security risks, enhance data protection, and ensure compliance with global standards. Achieving ISO 27001:2013 certification strengthens your organization’s security posture, builds trust with clients, and demonstrates a commitment to safeguarding valuable information assets.

Founded in Hyderabad, Telangana, Mark certification consultants provide ISO 29990: 2010 Certification Services to our clients at economical rates. Our company offers IT certifications that help IT companies in sharing learning services for non-formal education and training. It specifies the basic requirements for the service provider and in addition to this, it enhances transparency which allows a worldwide basis of learning services. Our organization provides services to the customers who are flawless, transparent, and perfectly executed ISO certifications. ISO certification provides sharing learning services and it is internationally recognized. It helps to access worldwide markets and also helps in regulatory requirements. ISO 29990:2010 complies with overall performance, quality potential enhancement, and well-documented processes. We follow strict quality checks and high-quality work for our offered service. We are providing ISO certification service hassle-free and also quickly.

Chirag Group Of Company is a Kolkata (West Bengal, India) based company, which is indulged in providing superior class ISO registration services to the clients. To get your company registered under ISO and getting the certification of genuine standardization and quality assurance of your products & services, you need to register under ISO. Our team members are experts in assisting various clients in completing all the major operations to register under ISO.

What is ISO 22163:2017The International Organization for Standardization has published guidelines to bring a quality management approach to the rail sector.ISO/TS 22163, Railway applications – Quality management system – Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector, aims to help system integrators and equipment manufacturers in the rail sector make quality improvements through common best practices.The technical specification is a sector-specific application of ISO 9001:2015 and was developed in collaboration with the Association of the European Rail Industry to build on its industry standard.ISO/TS 22163 defines quality management system requirements for the rail sector that can be applied throughout the supply chain—including design and development, manufacturing, and maintenance.In October 2016, the Association of the European Rail Industry, UNIFE, announced the decision of Technical Committee 269 of the International Organization for Standardization (ISO) to replace the global standard for quality management systems in the rail industry – IRIS Rev. 02 – by a new ISO/TS 22163 version. Consequently, organisations certified according to IRIS Rev. 02 will have to undergo transition audits to update their certificates to ISO/TS 22163. ISO/TS 22163 will be based on the structure and requirements of the ISO 9001:2015 standard, which it will adopt in full, but comprises additional requirements for the rail industry. Deadlines and schedule Publication of the ISO/TS 22163 and the associated certification rules is scheduled for May 2017. Following the publication of the new standard, organisations are required to implement the changes in their quality management system prior to a transition audit. Certification auditors seeking to carry out audits according to ISO/TS 22163 are required to attend, and successfully complete, training supervised by UNIFE. On this background, July/August 2017 is a realistic timeline for the first transition audits. As IRIS Rev.02 certificates will expire after 14 September 2018, and all non-conformities need to be closed for all audits before a new ISO/TS 22163 certificate can be issued, the last transition audits should be completed by July 2018. Regulation for the auditing of remote locations/ support functions and extended workbenches/ site extensions Since the quality management system of ISO/TS 22163 takes an integrated approach to the organisations and/ or the production site, the transition of the quality management system to ISO/TS 22163 at remote locations/support functions and extended workbenches/ site extensions must be completed before the transition audit takes place. As was the case for former regulations, remote locations/support functions must be audited prior to the associated production site(s). This principle continues to apply for the transition phase from IRIS Rev. 02 to ISO/TS 22163.The new ISO/TS 22163: 2017 standard:Is published in May 2017 and replaced the existing IRIS Rev.2.01, till September  2018, covers all requirements of ISO 9001:2015 and has been built according to the High Level Structure, supplemented by existing and new additional mandatory and optional requirements of the rail industry especially also new KPIs,continues to be supported by the "IRIS Audit Tool" that is based on the new IRIS Assessment Sheet, composed by around 870 mandatory requirements, which are grouped into about 300 questions, as well as new KO-requirements (plus additional optional requirements), Requires the appraisal of the customer focus performance level,Requires introduction of turtle diagrams and applies the methodology of Process Effectiveness Assessment Reviews (PEAR) for some mandatory processes, Utilizes a maturity model for business management systems concluding your companies BRONZE-SILVER-GOLD rating.Role of ConsultantAssisting to client from beginning till certification that includes documentation, training and internal auditing.

Ours is a Thane (Maharashtra, India) based industry that is involved in offering ISO Certification Consultancy Services. We have a team of professional and experienced consultants that provide apt advice on any issue related to ISO certifications. Getting an ISO certification is important as it increases the Effectiveness of managing business processes and the credibility of an organization. Thus, we help in guiding you on how to follow guidelines of QMS, EMS, OHSMS & EnMS standards. We ensure complete satisfaction to the clients. Also, our services are nominally charged. We also get your organization certified to any of the above standards as per your preference on the certification body. We also audit organizations and give awards as best QMS/EMS/OHSMS/EnMS practicing organizations. For details contact. Our Speciality is Internal Auditor training

We offer iso certificate. This is now a iso 9001:2008 certified company.

E- Filling Infotech Private Limited is a known name, specialized in providing ISO certification services from Kolkata (West Bengal, India). With our services, we assist clients to prepare for the implementation of the ISO standards, filling & filing application, audits, and completing other related formalities in a careful manner. We majorly cater to ISO certifications requirements of clients across IT and Consulting, Manufacturing, Banking, and Finance sectors. To schedule an appointment with one of our consultants, ring us on the given numbers.

In agreement with the stellar reputation of ours, we offer our esteemed clients a varied range of services of ISO Certificate Registration Services. We are committed towards meeting our clients precise needs. Our service is far and wide availed for its consistency & affordability. Our accomplished staff provides consultation to the clients regarding the whole registration process. The service is provided as per the specifications given by clients. Other than that, our service is highly appreciated for timely execution among our clients. Details : ISO 9001 contains all of the requirements which an organisation must address within their Quality Management System (QMS) if they wish to be certified against the Standard. The majority of these requirements would be identified by many organizations as 'common sense' topics which they would want to address in order to run their business well e.g. sales, design, purchasing, training, calibration of test equipment, control of records. ISO 9001 is written by a committee (TC 176) and is designed for use in any type of organisation. This inevitably means that there are compromises in the wording of the Standard and some interpretation is often needed.

Listed amid the celebrated names in the industry, we are providing ISO certification consultancy services to the businesses in the city. Ours is a group of skilled professionals, who work together & with clients and provide solutions as per their needs. With this, we help them in completing the paperwork and other legal procedures. We are operating from Nanded (Maharashtra, India); clients can get in touch with anytime, through our website. Our service charges are also reasonable.

ISO certification helps to boost your business quality additionally the overall potency of thebusiness. ISO is an independent organization that gives standards in terms of quality, safety,and efficiency of products and services provided by businesses. With the increasingcompetition among the business, it’s top of the notch to deliver top quality of goods &services so as to sustain within the market.  ISO 9001 CERTIFICATION - QUALITY MANAGEMENT SYSTEM  ISO 14001 CERTIFICATION – ENVIRONMENTAL MANAGEMENT SYSTEM (EMS)  ISO 27001 CERTIFICATION - INFORMATION SECURITY  ISO 45001:2018 CERTIFICATION – OH&S CERTIFICATION (OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM)  ISO 22000:2018 CERTIFICATION – FOOD SAFETY MANAGEMENT SYSTEM (FSMS)- FSSC22000 Certification  ISO 20000:2018 CERTIFICATION – IT SERVICE MANAGEMENT SYSTEM Other Certification  CE certification for Medical Devices and Machines  BIS registration for Electronic and Electrical Devices  HACCP: Food Safety Management -- Hazard Analysis and Critical Control Points (HACCP)  KOSHER (Just as the Food and Drug Administration inspects the US food supply to ensure that it is safe to eat and free from contamination according to US laws, Kosher certification agencies like EarthKosher inspect and certify food as well, in keeping with Jewish dietary laws.) SEDEX Certification -is a globally recognized accreditation that signifies a company’s commitment to ethical and responsible sourcing and manufacturing practices. It is a mark of trust that indicates a company’s dedication to social and environmental responsibility. SA8000-- The SA8000 Standard is an auditable certification standard thatencourages organizations to develop, maintain, and apply socially acceptable practices in the workplace. It was developed in 1989 by Social Accountability International, formerly the Council on Economic Priorities, by an advisory board consisting of trade unions, NGOs, civil society organizations and companies.The SA8000's criteria were developed from various industry and corporate codes to create a common standard for social welfare compliance. The current (2014) version of the standard is built on earlier 2001, 2004 and 2008 versions.

Elevate your business standards with our ISO Certification service. We guide you through the certification process, ensuring compliance with international quality, safety, and efficiency standards. Our expert consultants provide comprehensive assistance, from documentation to implementation, ensuring a seamless ISO certification journey. Gain a competitive edge, enhance customer trust, and improve operational excellence with our tailored ISO solutions. We cater to various ISO standards, adapting our services to your industry-specific needs. Join the ranks of globally recognized, quality-focused businesses. Choose our ISO Certification service for a reliable, efficient, and strategic approach to demonstrating your commitment to excellence and continuous improvement.

ISO certification services validate an organization's commitment to quality, efficiency, and customer satisfaction. Achieving ISO certification signifies adherence to international standards, enhancing credibility and market competitiveness. These certifications cover various aspects, such as quality management, environmental practices, and information security. Organizations undergo rigorous assessments to meet ISO requirements, ensuring robust systems and processes. ISO certification is a globally recognized hallmark, attracting customers and stakeholders, and demonstrating a dedication to excellence in products or services.

Type of Certification Renewal Type Of Industry Manufacturing Type Of Service Provider Consulting Firm ISO 9000 is a family of standards for quality management systems. ISO 9000 is maintained by ISO, the international organization for standardization and is administered by accreditation and certification bodies. The rules are updated, as the requirements motivate changes over time. Some of the requirements in ISO 9001:2008 (which is one of the standards in the ISO 9000 family) include: A set of procedures that cover all key processes in the business; Monitoring processes to ensure they are effective; Keeping adequate records; Checking output for defects, with appropriate and corrective-action where necessary; Regularly reviewing individual processes and the quality system itself for effectiveness; and Facilitating continual improvement A company or organization that has been independently audited and certified to be in conformance with ISO 9001 may publicly state that it is "ISO 9001 certified" or "ISO 9001 registered". Certification to an ISO 9001 standard does not guarantee any quality of end products and services; rather, it certifies that formalized business processes are being applied. ISO 9000 series of standards ISO 9001 is one of the standards in the series of quality management system standards. It can help bring out the best in organization by enabling them to understand processes for delivering products/services to their customers. The ISO 9000 series of standards consist of: ISO 9000 - Fundamentals and Vocabulary: this introduces the user to the concepts behind the management systems and specifies the terminology used. ISO 9001 - Requirements: this sets out the criteria we shall need to meet if we wish to operate in accordance with the standard and gain certification. Only ISO 9001 is a certifiable standard.Who is it relevant to? ISO 9001 is suitable for any organization looking to improve the way it is operated and managed, regardless of size, type or product provided. However, the best returns on investment come from those companies that are prepared to implement it throughout their organization rather than at particular sites, departments or divisions. Benefits Competitive advantage ISO 9001 is a top-management led quality initiative, which ensures that senior management take a strategic approach to their management systems. Improves business performance and manages business risk ISO 9001 helps to raise the organization''''''''''''''''s performance above and beyond competitors who aren''''''''''''''''t using management systems. Certification also makes it easier to measure performance and manage business risks in a planned and better way. Attracts investment, enhances brand reputation and removes barriers to trade Certification to ISO 9001 will boost organization''''''''''''''''s brand reputation and can be a useful promotional tool. It sends a clear message to all interested parties that the company is committed to high standards and continual improvement. Saves money Evidence shows that there are significant financial benefits for companies that are certified for ISO 9001 as it leads to operational efficiencies, increased sales, higher return on assets and greater profitability. Streamlines operations and reduces waste The assessment of quality management system focuses on operating processes. This encourages organizations to improve the quality of products and the service provided and helps to reduces waste and customer complaints. Encourages internal communication and raises morale ISO 9001 ensures that employees feel more involved through improved communication. Continued Assessment visits can highlight any skills shortages sooner and uncover any teamwork issues.

Our ISO Certification Service empowers businesses to achieve international standards, enhancing credibility and operational efficiency. We guide clients through the ISO certification process, covering quality management, environmental impact, information security, and more. Our comprehensive support includes documentation, audits, and compliance assessments, ensuring alignment with global benchmarks. Attaining ISO certification signifies a commitment to excellence, fostering customer trust and opening doors to new opportunities. Join us to elevate your business standards and demonstrate a dedication to quality on a global scale.

• Type of Certification: New Certification
• Service Mode: Online
• Payment Mode: Online/Offline
• Type Of Ownership: Proprietorship
• Country of Origin: India
• Application: License

staffing solution, HR Consultancy, Recruitment Services