Flush Doors Dealers in Cb Ganj, Bareilly

Plywood Flush Doors are made using a timber frame with plywood on the front and back surface. The doors are finished using paints or veneer to give it fine touch and appearance. Minimum efforts are required in their installation and maintenance as these have plain surface where dust is not accumulated. Besides, these are available in varieties of color shades, designs with accessories like handles, door stoppers, frames, viewers, door bells etc. Resistance to termite and borers makes these an affordable option for interior furniture or applications. 

• Moisture Content (%): 10 - 12
• Flatness of Shutter "(twist, cupping and warping)": not more than 1 mm
• Local Planess  (surface smoothness): not more than 0.5 mm
• Impact Indentation: not more than 0.2 mm by a weight of 0.5 kg
• Flexure Resistance  (residual deflection): not more than 2 mm
• Edge Loading a) Residual deflection b) Lateral buckling: not more than 0.2 mm not more than 1.5 mm
• Shock Resistance: no visible damage after 25 blows of 5 kg
• Buckling Resistance a) Initial deflection b) Residual deflection: not more than 40 mm not more than 5 mm
• Slamming of the Shutter: no visible impact after 25 impacts of 15 kg
• Misuse of the Shutter: no permanent deformation after the test
• Varying Humidity  (adverse weather condition): dimensional changes within 5%
• End Immersion: no delamination after immersion
• Adhesion of Plies: excellent
• Glue Adhesion: no delamination of the glue line
• Screw Holding Strength (kg): > 200
• Preservative Treatment: Two Tier Treatment: 1. Lumber and Veneers are treated with preservatives 2. Glue Line is fortified with non- leachable organophosphorous compound (USA technology)
• Specific Gravity: 0.60
• Water Absorption: < 2%
• Nail Holding Strength (kg): > 100

Plywood

Ply Wood