Pilling Tester Dealers

We offer a comprehensive range of Digital Pilling Tester that is used in textile industry for determining the tendency of the fabric to form pills. We manufacture, export and supply Digital Pilling Tester from New Delhi. Pilling is the formation on the surface of a fabric of small balls of entangled fiber. It is a fabric surface fault characterized by little pills of entangled fibers clinging to the surface. These are formed during wearing or washing by the entanglement of the loose fibers, which protrude from the fabric surface, and development of these into spherical bundle anchored to the fabric by a few unbroken fibers. These give a very unsightly look to the garments. The apparatus is beautifully finished in powder coated paint. The boxes are covered with a layer of matching laminated sheet.   Functioning :Test specimen is taken from the fabric sample and is sewn, so as to be a firm fit, when placed round a molded polyurethane tube. Four tubes are placed in each of the two Boxes provided in the Tester. The Boxes are set in motion for an agreed number of revolutions. After tumbling, the extent of Pilling is determined visually against photographic standards.   Equipment :The LABIN Digital Pilling Tester consists of two Wooden Cubic Boxes with inside surfaces lined with cork and outside surfaces beautifully laminated. These boxes are rotated about their central axis at a specified speed with the help of a motor and a gear box. A pre-settable DIGITAL counter stops the motor automatically after the desired number of revolutions.   The Equipment is supplied complete with : Main Unit with Two Cubic Boxes having Digital Pre-Settable Counter. Polyurethane Pilling Tubes (Set of 8 Tubes). PVC Tape Roll. Specimen Insertion Tool. Instruction Manual.

Our online payment transactions are safe and hassle free. We pay special attention to make payment procedures secure and sound. With strong industrial experience, we make sure that the packaging is done as per the stated norms, by this; the products that we deliver are absolutely safe from the getting damaged.

• Size of Boxes: 225 mm x 225 mm x 225 mm
• Thickness of Cork Lining: 3 mm
• Speed of Rotation of Boxes: 60 RPM
• Size of Test Specimen: 125 mm X 125 mm
• Size of Rubber Tubes: OD-32 mm, ID-25.5 mm, L-140 mm, Wt-52.25 gm.
• Motor: 1/4 H.P Single Phase 220 V AC

With the help of our efficient workforce, we are capable of providing our clients with a comprehensive range of Pilling Testers that help in knowing the pilling properties of fabric samples. In this tester, the test specimens are rubbed against each other under the controlled conditions for specified periods. After this, the appearance of the final samples is compared against standard ratings.

• Automatic Grade: Automatic
• Application: Industrial Use

• Type: Pilling Tester
• Certification: ISI Certified, ISO 9001:2008 Certified
• Condition: New
• Warrenty: Lifetime Buyback Warranty
• Brand Name: Paramount
• Country of Origin: India

Pilling Photographs ASTM Graded Photographs are widely used for evaluating surface change after pilling testing. ASTM Pilling Photographs are specially designed evaluating the specimens after pilling testing. The five photographs illustrate varying degree of pilling and related surface changes which could be encountered on a typical fabric. They vary from Grade 1-5. The photographs, according to personal preference, may be used as supplied or may be cut up and uses individually

  Test the pilling of the textile fabrics supplied with template, 8 rubber tubes and jig/fixture. Two box and four box models are available. The “NUNES” Pilling Tester consists of two cubical boxers inner walls of box are lined by 3mm thick cork sheet. The boxes are rotate by means of motor about the horizontal axis. A pre-set digital counter is provided for stopping the tester after pre-determined number of revolutions. A template, metal cylinder, comprising Jig and 8-rubber tuber are provided with the instrument. Instrument is finished by bright chromes plating & metallic painting for corrosion resistant finish.

THE PAV can be used for test methods including ASTM D3511 Arcadia AG26 ASTM D3512 Next TM26 ASTM D3514 SN 198525 ASTM D4970 Wool mark TM196   The pilling assessment viewer (PAV) for the textile market has been developed with the help of a major textile company in accordance to BN EN ISO 12945 standards incorporating all 3 part and adopting the following test methods…… Part Bs En Iso12945-1 : Pilling Box Method Part Bs En Iso12945-2 : Modified Martindale Method Part Bs En Iso12945-3 : Random Tumble Pilling Method The versatile nature of the unit includes a recess for the modified Martindale specimen head. This enables the fabric to be assessed during the test procedure , whilst still mounted on the head.

• Country of Origin: India
• Type: Pilling Tester
• Certification: ISO 9001:2008 Certified
• Color: Grey
• Feature: Easy To Use
• Condition: New
• Frequency: 45Hz
• Automatic Grade: Automatic
• Power Source: Electric
• Operating Current: Single Phase
• Warrenty: 1year
• Temperature Capacity: Low Temperature
• Puncture Voltage: 220V
• Power: 1/4 HP
• Quality: 1
• Certification: yes
• • Size of Wooden Boxes (Inside) : 235 x 235 x 235 mm: • Thickness of Cork Lining : 3.2 mm (As per standards)
• • Speed of Rotation of Boxes : 30 r.p.m. for snagging & 60 r.p.m. for illing: • Size of Test Specimen : 12.5 ´12.5 cm²
• • Size of Rubber Tubes : f 32mm (OD) x f 25mm(ID) x 140mm(L) (16 Tubes): • Motor : 1/8 H.P. Single Phase geared motor 220V AC

• No. of Heads: 4
• Working Pressure: 3 KPA, 6KPA, 9KPA and 12 KPA (4 Nos each)
• Exposed area: 6.45 cm2
• Maximum Available Pressure: 12 KPA (790 gms)
• Rotational Speed of Outer Peg: 48 ± 2 RPM
• Drive (Speed) Ratio of Outer and Inner Peg: 32:34
• Total Stroke of Outer and Inner Peg: 24 mm
• Pilling: 60 mm for Abrasion
• Power Supply: 230 V AC 50 Hz
• Power Consumption: 0.2 KWH
• Related Standards: ISO 5470, BS 3424, 5690, JIS L 1096, ASTM 4966 / 4970-99, DIN 53863, 53865, SFS 4328

• Condition: New
• Power Source: Electric
• Application: Household, industrial, Laboratory
• Material: Steel
• Finish: Polished

Digital Pilling Tester is used to check the pilling resistance of the fabric. Digital Pilling Tester manufactured by B-Tex Engineering is of fine quality and gives optimum performance. Pilling is a fabric surface fault characterized by little pills of entangled fibres clinging to the surface. Pills are formed during wearing or washing by the entanglement of the loose fibres, which protrude from fabric surface. To determine the tendency to form pills, test specimens taken from the fabric sample are rubbed against each other under controlled conditions. Features of Digital Pilling Tester: Consists of two wooden cubical Boxes with inside surfaces lined with special standard cork sheet and outside surfaces beautifully laminated. Consists of geared motor which rotates the boxes about their central axis Pre-set Digital Counter stops the motor automatically after the desired number of revolutions Can be used for all types of fabric and weave patterns. Eliminates subjective assessment. More accurate. User friendly. Adopted universal standard testing procedure. Specifications of Digital Pilling Tester: Size of Wooden Boxes (Inside) : 235 x 235 x 235 mm Thickness of Cork Lining : 3.2 mm (As per standards) Speed of Rotation of Boxes : 30 r.p.m. for snagging & 60 r.p.m. for pilling Size of Test Specimen : 12.5 ´12.5 cm² Size of Rubber Tubes : f 32mm (OD) x f 25mm(ID) x 140mm(L) (16 Tubes) Motor : 1/8 H.P. Single Phase geared motor 220V AC Counter : 5 DIGITS DIGITAL Pre-Set type counter Overall Dimensions of the Unit : 813 (W) x 482 (D) x 508 mm (H) Net weight : 35 kg (77 lbs.) How Digital Pilling Tester works? The very first step is to clean the boxes thoroughly. Then place four mounted test specimens in each box and close the boxes. Later set the pre-set counter at 18000 with the help of the Thumb Wheel setting provided on the Digital Counter. Press the start button. The machine would stop automatically after 18000 revolutions.

• Brand Name: NTF
• Features: Smooth finish, Unique look, Innovative design .
• Speed of Rotation of Box: 60 rpm
• Size of test specimen: 12.5 x 12.5 cm
• Rubber Tube: 31.5mm (OD) x 25.1mm (ID) x 140mm (L)
• Power Supply: 220 V AC 50 Hz
• Inner Dimension of box: 225 x 225 x 225 mm
• Thickness of Cork Lining: 3 mm
• No of Boxes: 2 Nos 0r 4 Nos

• Type: Pilling Tester
• Color: Sky Blue
• Condition: New
• Color: Sky Blue
• Power: 15 AMP
• Weight: 25 Kg
• Height: 18 Inches
• Operating Speed: 60 RPM
• Certificate: Traceable to NABL

ICI Pilling and Snagging Tester, used to determine the surface pilling and snagging pro both woven and knitted materials. It complies in full with the requirements of EN ISO 129 BS 5811, etc. Standards: GB/T4802.3, ISO 12945.1, BS5811, JIS L1076, IWS TM152Feature of ICI pilling tester Simplified designing, more convenient to operate, and easy to maintain. Synchronous speed motor drives the test boxes, ensuring constant speed of rotation

• Net weight: : 56kg
• Net Dimension: : length×depth×height 33”×21”×21”.

Pilling tester is used to replicate pilling in fabrics under standard test conditions as per ICI Method. Pilling tester with digital LCD controls. A Unit comes with 2 pilling boxes with standard cork lining fitted inside and 5-digit pre-set counter. The boxes are rotated about their central axis as per standard conditions. Accessories include specimen mounting jig, specimen inserting tool, tape, marker pen, test template, 8 nos of pilling tubes and scissor. Pilling photographs - ASTM OR IWS are available optionally. Inside, size of each box is 225mm x 225mm x 225mm and cork lining thickness of 4mm. Option of 4 stations also available.    

• Brand Name: PARAMOUNT
• Model Number: I2

We are offering Under the supervision of our experienced professionals, we are providing high quality range of Pilling Tester Machine. Specificationsusage: Usage: For testing pilling Condition: New Widely demanded in laboratories and textile industries Features: Strong construction Excellent performance Longer service life

Standards BS 5811, IWSTM 152, NEXT 19, M&S P18,P18A,P18B,P21A BS EN 12945-1 With 2 Wooden boxes Internal size 9"x9"x9". Best Quality rubberized Cork Sheet of 3 mm thickness. Fixed speed of rotation of boxes is 60 RPM. Size of Test specimen is 125.5mm x 125mm ID x 150mm long. Size of Pilling Tubes: 32mm dial x26mm x 150mm long having Shore Hardness of 65 degree Equipped with ¼ H.P. Single Phase Geared Motor. Pre-settable Counter having 5 digits(99999) sensed by best quality Proximity Switch Supplied with Specimen mounting Jig, Specimen Cutting Template & 8 Nos. Pilling Tubes

The Martindale Abrasion cum Pilling Tester measures the abrasion and pilling of the textile fabrics. It consists of four testing plates on which the abrading fabrics is attached, these four testing table are mounted on the base plate of the instrument. There is revolving plate, which revolves with the help of three cranks, pegs & motor. There are four sleeves attached on the revolving plate. The sample holders for abrasion & pilling testing are provided with the instrument. There is a set of weights for proper pressure on the test specimens. Templates for cutting the samples & abrading cloth and their mallet are also supplied as standard accessory. All parts of the instrument are metallic paint, chrome plating & zinc plating to give corrosion resistance finish.Technical specificationRelated standard: BS, ASTM, ISO, DIN

• Standards: BS EN ISO 129, 45-1, BS5811

We are one of the prominent manufacturer, exporter and supplier of an optimum quality ICI Box Pilling Tester that is extensively used in various industries. The offered machine is highly acknowledged for its better functional life, rust resistance and hassle free performance. Before delivering this at clients' end, our quality controllers test the offered equipment on various parameters in order to ensure flawlessness. Offered ICI Box Pilling Tester requires less maintenance and can be installed easily. Specification 2 Box Model with Digital Display

we are offering Random Tumble Pilling Tester. Standards: ASTM D3512, GB/T 4802.4, ISO 12945.3, JIS L1076-D Technical Parameters: 1. 4 test chambers; 2. Equipped with a rotating stainless impellers in each test chamber; 3. Reliably Sealing of the testing chambers; 4. A digital electronic counter; 5. A buzzer to remind the end of test; 6. Equipped with pressure gauge and the timer; 7. Dimension of Drum: 146×152mm; 8. Dimension of Cork liner: 452×146×1.5mm; 9. Rods: L=121mm; 10. Rotating speed: 1200r/min; 11. Compressed air: 0.014-0.021MPa.