Under Crank Shearing Machine Dealers in Gt Road, Batala

Spring loaded mechanical hold-down pads hold the sheets securely to avoid slipping and bowing result in clean square cut. Hold down units are provided with oversize pads to avoid impression on sheet metal.

We bring forth Under Crank Shearing Machine which is highly demanded in the market for its better functionality and higher efficiency. These Under Crank Shearing Machines are manufactured with the use of best quality raw materials that impart strength and durability. These Under Crank Shearing Machines are easy to operate and are very economical as well. Parts and Functioning : Side Frame : The side Frames are steel fabricated. These are well reinforced to achieve minimum deflection and maximum rigidity by providing ribs where-ever required and keeping the proper metal thickness. Its interlock design gives support to the tableTable : The strong bed box type of steel plate’s fabrication having suitable section forms a rigid back-bone for the plate shears and it gives proper support to the lower knifeBeam : The upper beam is of steel well designed by keeping the required metal thickness and providing ribs required to eliminate deflection. The beam is designed in such a way that it maintains uniform knife clearance throughout the full length of knife. The upper beam travels in long broad faced flat guides which provide sufficient bearing area. This helps is maintaining uniform knife clearance during the reciprocating motion of the upper beam knife the beam is provided gun metal wedge bars on front and back side so that friction is minimizedHold Down : The hold down is spring loaded giving sufficient pressure on plate to be sheared which result in firm gripping and accurate shearing width of plateSlitting Unlimited Length : Gaps are provided in the side Frames due to which trimming of the sides of sheets longer then the shears length can easily be done. The upper beam stroke can easily be adjusted so that the knives do not cross completely at the high end and the plate is trimmed in successive cuts by progressively moving it through the throatClutch Brake Drive : Revolving key clutch linked with the main gear engage every time when the foot pedal is pressed. Drive is through ‘v’ belts and gears. Moving shaft and big gear are mounted on gun metal bush bearings. Brakes are adjustable one incorporated on the end of crank shaftBlades : Blades material is high carbon and high chromium steelStandard Equipment : Back gauge manually operated , front gauge, front extension bracket, one set of blades fitted with machine, gears and ‘v’ belts pulley guard and manual lubrication pump Specifications ModelSear Length (inches / Mm)Shear Capacity ( in Inch & Mm)Size of Blade Blade SegmentsH.p. Requried StrokesDepth of Gap Maximum BackHeight of Table Rpm 1440Per MinuteIn Frame Adjustment From Floor ENG-UC-25A25 / 6101/161.6660X65X13124065600800ENG-UC-25B25 / 6101/83.2660X65X13134065600800ENG-UC-40A40 /10161/83.2104X65X13134075600800ENG-UC-50A50 / 12701/161.61320X65X13134075600800ENG-UC-50B50 / 12701/83.21320X65X13154075600800ENG-UC-50C50 / 12703/1641320X75X16154075600800ENG-UC-60A60 / 15241/83.21575X75X16153575600800ENG-UC-60B60 /15243/1641575X75X1617.53575600800ENG-UC-72A72 / 18301/83.21880X75X1617.53590600800ENG-UC-72B72 / 18303/1641880X75X1617.53590600800ENG-UC-80A80/ 20301/83.22080X75X161103590600800ENG-UC-80B80 / 20303/1642080X75X161103590600800ENG-UC-100A100 / 25401/83.22600X76X162103090600800ENG-UC-100B100 / 25403/16 42600X76X162103090600800ENG-UC-120A120 / 30501/83.23100X75X1621030100600800ENG-UC-120B120 / 30503/1643100X75X1621030100600800