Electric Hammer Drill Bits Dealers in Bhavnagar

• all geared radial : drilling machine

We are offering Salient Features of the machine are as under: � Heavy Duty �50mm drilling in steel. � 16 Spindle speeds and 4 auto feeds for drilling, tapping, reaming operations. � This machine may be Capable of drilling, milling, tapping, honing, counter-boring, spot-facing, reaming, and boring and other similar utilities. � Speeds can easily change. � Thread tapping operations can be done in either rotation and working depth can be controlled using a positive stop gauge. � Double Column Construction for Rigidity and effortless centering. � �Generously Proportional & Well adequately ribbed base plates, column and arm for Maximum Rigidity and Minimum deflection. � The high quality of this machine and its ease of operation make it suitable for use by students, amateurs� and home hobbyists, as well as skilled technicians. � Tapper Roller facility for better sliding of drill head on arm guide � Hardened and ground gears for minimum wear and tear � Precision hardened and ground spindle.

• Automatic Grade: Manual
• Hole Diameter: 0-25 mm
• Number Of Shaft: 8
• Max Spindle Speed (rpm): 77-1440 RPM

We have the moat upgraded machines and technology to make sure that the raw material is completely in compliance with the set standards. This helps us in presenting good quality and defect free products. We are highly concerned towards providing the top-notch array of products to the buyers and thus, check the lot at different levels for quality assurance.   Details : Size - Length - 85 -112 inch (Main frame ) Single Hopper / Double Hopper Weight - 310-335 Kg / 350 Kg No. of Tines - 9-17 Tines Capacity of Hopper - Approx 35 kg power Source - 35-45 HP

• radial drill: 84000

Heavy duty & precision all types of drilling machine radial & pillar drill machine. drill machine cap 19 mm to 40 mm all model.

• Type: manual heavy duty
• Brand Name: shakti
• Certification: isi
• Voltage: 440 volt
• Condition: new
• After-Sales Service Provided: as per norms
• Drilling Speed: 100 to 2400
• Model Number: sjp 25
• Place of Origin: Bhavnagar Gujarat

Drilling cap. In steel 25 drilling cap. C. I. 32 tapping in m. S. 12 spindle center to col. 230 spindle travel 145 spindle nose to base 1000 dia. Of column 90 dia. Of ram 72 size of round table 365 overall base size 570 x 345 no. Of spindle speed (8 speed) 105 to 2650 taper in spindle base mt-3 machine area of base 260 x 350 drill motor (gear drive) 1 hp 1440 rpm total height of machine 1625 v-belt size b-49 net weight 200 kgs.

• Type: Drill machine
• Certification: CE Certified
• Color: Blue
• Voltage: 110V
• Warrenty: 1 Year
• Features: Easy to operate, Excellent functionality

• Material: Metal
• Usage: Drilling
• Thickness: 20-40mm
• Length: 15-20cm
• Color: Metallic
• Surface Finishing: Non Coated
• Specialities: Heat Resistance, Rust Proof

We are offering radial drill machine, all type manufacturing drill machine and special purpose machine .

• Brand Name: SP
• Country of Origin: INDIA
• Warranty: 1 Year

25 mm capacity Pillar type Drilling Machine with SGI Steel Gears and compete electricals

• Warranty: 1year
• Color: Blue,Green,White,Other
• Automatic Grade: Automatic,Semi Automatic
• Certification: Other
• Condition: New
• Driven Type: Electric,Mechanical
• Weight: 100-200kg
• Voltage: 220V
• Type: Pillar Drilling Machine
• Country of Origin: India
• Power: 1-3kw,Other
• 1/2' to 25 mm CAPACITY: Customize REQUIRED

• Automatic Grade: Automatic
• Power: 240 Volt AC
• Range of Spindle Speed: 400 RPM
• Base Size: 460mm
• Type of Drilling Machine: Pillar
• Table Size: 330 x 330mm
• Main Motor Power: 0.5 HP

• Type: Hand Drill Machine
• Voltage: 220V
• Automatic Grade: Automatic, Manual
• Power: 1-3kw
• Driven Type: Electric

Drilling Capacity In Steel 25 mm, Spindle Travel 170 mm, Taper in Spindle Mt-3, No of Speed 8 Speed, Spindle Speed Rang 70 RPM to 1980 RPM, Column Diameter 89 mm, Center of Spindle to Column 250 mm, Square Working Table Dimension 340 mm x 340 mm, Center of Spindle to Column 250 mm.

• Brand Name: PILLAR DRILLING MACHINE

We offer Pillar Drill Machine. DESCRIPTION CAPACITY & SIZE Drilling Capacity In Steel 19mm Column Diameter 74mm Center Of Spindle To Column 200mm Max. & Min. Distance From Spindle To Table 500mm & 700mm Maximum Distance From Spindle To Base 925mm Taper In Spindle (Moser Taper) MT-2 Spindle Travel Maximum 125mm Number Of Spindle Speed 87 TO 3200 RPM Table Size 260 X 260mm Base Size (Machine Area) 260 X 235mm Overall Base Size 480 X 300mm Overall Height With Guard 1475mm V-belt Section A-42 Electrical Motor 0.5 HP, 50 Cycle, 1440 RPM (LUBI BRAND) Wooden Case Size ( LXWXH) 700 X 400 X 1300mm Standard Equipments: Motor Pulley, Drift key. Optional equipments: Electric Motor, Reversible Switch & V-Belt,

Heavy Duty - 50-mm drilling in steel. Wide range of 8 spindle speeds for drilling, tapping, reaming and boring operations. Five auto power feeds: 0.05 to 0.25-mm per revolution. Auto feed disengages at preset depth as well as too high or abnormal drilling pressure. Hardened and lapped alloy steel gears fitted on splined shafts in main drive gearbox runs in an oil bath. Hardened and precision ground spindle sleeve. Double column construction for rigidity and effortless centering. Arm and drill-head guide ways are precisely hand scraped for minimum play and rigid clamping of drill-head with the arm. Well adequately ribbed base-plate, inner column & arm for maximum rigidity and minimum deflection.

We are the manufacturer of our product All Geared Heavy Drill Machine 40mm Drilling Capacity with high auto speed.

• Color: Blue & Gray

We are offering pillar drill machine. Model no: cmt-25lps drilling capacity (in steel) : 25mm column diameter : 90mm center of spindle to column : 230mm max. Spindle to table : 700mm max. Spindle to base : 1100mm tapper in spindle : mt-3 spindle travel : 150mm table size : 320*320mm no. Of speed : 8 speed range of speed : 80 to 2350 rpm base size (machined area) : 315*290mm overall height with guard : 1675mm v belt section : b-49 electric motor - 1440 rpm : 1 hp wooden case size l*w*h : 950*500*1575mm weight (apx.). : 180 kg.

We offer radial drill machine. A well known radial drill machine supplier company.

• Model: 20mm (MT-3) Drill Machine
• Drilling Capacity in Mild Steel: 3/4" - 19 mm
• Spinddle Centre to Column: 8" - 203 mm
• Spindle Travel: 5(1/2)" - 140 mm
• Size of table square: 11" - 280 mm
• Over all-Height of machine: 52" - 1320 mm
• Max distance Spindle to base: 34" - 864 mm
• Coloumn Diameter: 2(7/8)" - 74.15 mm
• Machine Base: 19" x 13"
• Speed Range: (8) 86 x 3360 R.P.M.
• Spindle Nose Bore: MT-3
• Motor Speed: 1440 R.P.M.
• Motor: 0.75/1 H.P.
• V-Belt: A - 42
• Weight of machine without motor: 106 kg. (Approx)

•  : MM
• Drilling Capacity in M.S.: 25
• Drilling Capacity in C.I.: 32
• Tapping in M.S.: 12
• Spindle Hole Taper: MT-3
• Spindle Travel: 150
• Spindle Speeds (RPMxStep): 105-2650x8
• Diameter of RAM: 72
• Max. Dist. Spindle Nose to Table: 560
• Spindle center to column: 225
• Table Size: 336 sq. 300x300
• Column Diameter: 90
• Dist. from Spindle Nose To Base: 1000
• Motor 1440 RPM: 1 HP
• V-Belt: B 46
• Weight Approx: 200 KG.

We are offering 25mm heavy duty pillar drill machine with fine feed.