Plate Heat Exchanger Dealers in Kumbharwada, Bhavnagar

• Frame Types:: Industrial Painted Frames – Blue
•  : Hygienic Stainless Steel Frames
• Flow Type:: Most models parallel flow
• Connection Types:: Range of industrial and hygienic connections  

Plate heat exchangers or plate heat conductors serve to exchange and conduct thermal energy from one element to another. That is why they are used predominantly in heating, refrigeration and air conditioning systems. This catalogue lists spare parts for plate heat exchangers.Sealed models are bolted together and plates can thus be quickly and easily replaced. They are sealed with rubber seals between the two plates. These are vulnerable to aggressive media such as ammonia. For this reason welded or soldered plate heat exchangers are used instead. These can however only be replaced completely or in modules (cassettes).In our selection you will find suitable spare parts for every design of heat exchanger. Plate Heat Exchanger Advantages Easy to Remove and Clean You simply remove the tie bolts and slide back the movable frame.  The plate pack can then be inspected, pressure cleaned, or removed for refurbishment if necessary.  Expandable A significant benefit of the plate heat exchanger is that it is expandable, allowing an increase in heat transfer capability.  As your heat transfer requirements change, you can simply add plates instead of buying an entire new frame unit, saving time and money.  High Efficiency The pressed plate patterns and narrow gaps allow for very high turbulence at relatively low fluid velocity. Combined with counter directional flow results in very high heat transfer coefficients.  Compact Size The high efficiency requires less heat transfer area resulting in a much smaller heat exchanger than would be necessary for the identical effectiveness of other heat exchanger types.  Typically a plate heat exchanger requires 20-40% less space than required by a shell & tube heat exchanger.  Close Approach Temperature The same features that give the plate heat exchanger its high efficiency also makes it possible to reach close approach temperatures which is particularly important in heat recovery and regeneration applications.  Approach temperatures of 1ºF are possible.  Multiple Duties in a Single Unit The plate heat exchanger can be built in sections, separated with simple divider plates or more complicated divider frames with additional connections.  This makes it possible to heat, regenerate, and cool a fluid in one heat exchanger or heat or cool multiple fluids with the same cooling or heating source.  Avoid cross contamination Each medium is individually gasketed and as the space between the gaskets is vented to the atmosphere, cross contamination of fluids is eliminated.  Less Fouling Very high turbulence is achieved as a result of the pattern of the plates, the many contact points, and the narrow gap between the plates.  This combined with the smooth plate surface reduces fouling considerably compared to other types of heat exchangers.  Lower Costs High heat transfer coefficients mean less heat transfer area and smaller heat exchangers, and sometimes even less heat exchangers.  This and less space requirements, reduced flow rates, and smaller pumps means.  

We have well-connected and capacious warehouse that helps us in arranging products systematically to deal with urgent deliveries and orders. Our exceptionally good warehouse system helps us in keeping the products safe till the final dispatch. With our brilliant logistics network, we are capable to deliver the orders within the postulated time frame. The offered Marine Plate Heat Exchanger is available in different thicknesses varying from 0.3-6.0mm and more. 

A Plate Heat Exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluid. This has a main benefit above a square heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates. This facilitate the transfer of heat, and deeply increase the speed of the temperature change. Plate Heat Exchangers are now general and very small brazed versions are used in the hot-water sections of millions of arrangement boilers. Plate Heat Exchangers have a high temperature move speed compared to extra types of heat exchangers due to their large surface area. They are composed of a number of thin metal plates compressed together into a ‘cover pack’ by two force plates. inside a plate heat exchanger, the fluid paths rotate between plates allowing the two fluids to interact, but not mix, several times in a small area. Each plate is grooved to boost the surface area and maximize heat transfer. Plate Heat Exchangers have a number of applications in the pharmaceutical, petrochemical, chemical, power, industrial dairy, and food & beverage industry.

• Machine Type:  Plate Heat Exchanger
•  Machine Sub Type:  SWEP
•  Model:   –
•  Marine/Industrial:  Marine
•  New/Used/Recon:  New
•  Manufacturer:  SWEP
•  Fuel Type:  Diesel

• Plate Heat Exchanger Type: Gasketed Plate and Frame
• Heat Transfer Type: Condensers
• Brand: Alfa
• Model Number: M6

Be it online or cash deposit, the financial operations are carried out only under the stern management, supervision of professionals. To make our payment procedures highly secured, we make use of the leading technologies to avoid any fraud. Due to our streamlined packaging system, we are capable to fulfill bulk and customized packaging requirements of the clients. In addition to this, we ensure complete safety of the products.

Plate Heat Exchangers, Alfa Laval Purifier

Plate Heat Exchangers, processing machinery parts, Marine Valves

Heat Exchanger Plates, Heat Exchangers, Generator Air Cooler, Turbo Charger