Photoelectric Detectors Dealers

System Sensor Filtrex Smoke Detector provides early warning smoke detection in difficult environments where traditional smoke detectors are not practical. Filtrex provides protection in dirty, dusty environments that tend to cause false alarms with standard smoke detectors. Operation: Using a small air intake fan and a high density replaceable filter, air and smoke are drawn into a photoelectric sensing chamber while airborne particulate and water spray are removed. When the filter becomes too clogged to draw adequate air into the sensing chamber, power is cut from the detector, causing a trouble signal at the fire alarm control panel. When the filter is replaced, power-up is automatic. Applications Animal research facilitiesInstitutional laundry facilitiesAmusement parksZoosPerformance theatresLoading docksPaper millsTextile mills Product Overview Intelligent communicationsHigh density filter removes particulate down to 32 micronsAir delivery system is separately powered and fully supervisedFilter is easily field replaceableResistant to water spray in applications where occasional hose-down cleaning is performedOptional remote LED accessoryRotary decade address switchesCompatible with 200 and 500 Series products̢۪ protocolNo modification required to panels compatible with System Sensor intelligent photoelectric smoke detectors Specification Size : 3.5" 8.9 cm) H x 6.1" (15.5 cm)diams in B5016-FTX base. Weight : 7.3 oz (207 grams). signaling Line Circuit Supply Range : 15-32 VDC Detector Current (Max. Avg.) : 250 pA @ 24 VDC (without communication) & 360 pa @ 24 VDC (one communication every 5 seconds with LED enabled) External / Auxillary Power Supply Voltage Range : 15.30 VDC (filtered) External / Auxillary Power Supply Maximum Current : 123 mA Temprature Rating : 32-1220F (0-500C) Relative Humidity : 10-93% Noncondensing Air Intake Fan : On 5 seconds every 30 seconds Filter : Air flow checked every 4 hours.

• Type: Photoelectric
• Material: Plastic
• Color: Brown
• Application: Smoke Detecting
• Power Source: Electric
• Warranty: 1 Year
• Certificate: CE Certified
• Mounting Type: Roof Mounting

We Offerphotoelectric Smoke Detectors, Offered By Us, are Hugely Popular among Clients, Which Made Us Capable to Deliver Clients’ Desired Products in Markets. for That, We are Trusted as the Prime Manufacturer and Supplier of Photoelectric Smoke Detectors. characteristicsphotoelectric Detectors Operate On the Light Scattering Effectsalight Source is Beamed in to An Area Mot Normally Seen By Photosensitive Elementpreferred to Detect Large Particles of Combustionassured & Accurate Resultseasy to Use applicationsresidential Sectorsindustrial Sectorscommercial Sectors Please Contact Us.

We offer 2351e photoelectric smoke detector forms part of the series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the series 300 is a detector which ‘acts conventionally, thinks intelligently. key features: low profile design low current draw backward compatible with series 100 detector range of bases wide operating voltage 8 to 30vdc bi-colour led detector status indicator automatic drift compensation programmable sensitivity addressable feature advanced maintenance features via remote hand-held test unit range of detector bases available tested and approved to en54 – 7:2000.

• Condition: New
• Warranty: 1 Year
• Color: White (Do not color)
• Voltage: 9–33 V DC

We are a trustworthy name, involved in offering excellence in the form of Photoelectric & Heat Sensor. We have an association with respected vendors from whom we source the raw inputs at very affordable charges. Additionally, the inputs are stringently checked before procurement.

We are a leading company offering a wide assortment of photoelectric smoke detectors. These products are highly efficient and reasonable. Further, these products are designed and developed under strict supervision of experts with innovative technology and latest machines. Features: latest technology economical damaged resistance

• Operating Voltage: 9.5 - 30 Vd.c.
• Quiescent Current (typ): 35m A
• Maximum Current Alarm: 40mA
• Remote Indicator Drive: 20 mA(max) / 9.5 - 14mA (typ)
• Operating Temperature Range: –10°C to +50°C,
• Storage Temperature Range: –30°C to +60°C,
• Maximum Humidity: 95%RH - Non- Condensing (at 40°C),
• Ingress Protection Rating: IP42,
• Colour / Case Material: Ivory White / ABS
• Weight (g): 95, Compatible Bases
• Base Heights (MM): 8, 13
• Base Fixing Centres (MM): 48 – 74
• Approvals: LPCB EN54

• Country of Origin: Made in India
• Brand: Agni Suraksha
• Alarm Sensor Type: Photoelectric
• Automation Grade: Automatic
• Voltage: 9 V Eveready make Battery (included)
• Temperature: 40 degree F to 100 degree F
• Led Indication: Green-Blink in Normal condition, Red-Steady Red in Alarm condition
• Size/Dimension: 105 mm diameter X 59 mm depth

CONVENTIONAL PHOTOELECTRIC SMOKE DETECTOR   Low profile design Low current draw Backward compatible with Series 100 detector range of bases Wide operating voltage 8 to 30V Bi-colour LED detector status indicator Automatic drift compensation Programmable sensitivity Addressable feature Advanced maintenance features via remote hand-held test unit Range of detector bases available Tested and approved to EN54 part 7 (2000) Extended warranty RE - 150   Confirms IS 2189 norms. Rugged CRCA sheet with powder coated finish. Modular Construction. Operates on 230 VAC, 24 VDC. Standby Battery backup with build-in charging. Fire / Fault status in unambiguous coloured LED. System On, Main, Standby ON status indication. Low Battery visual warning with audible buzzer tone. Earth fault indication with audible buzzer tone. RS485 for repeater/slave communication (Use shielded or twisted wire (CAT5E or CAT6)). Relay Outputs for actuators. Lamp test facility. One man walk test facility. Zone Isolation facility with loop voltage cut off. RS 232 Communcation for PC Software (Optional) Compatible to all types of conventional detectors.

The Photoelectric Smoke detector manufactured by us is best suited for detecting optical dense smoke, which involves fire materials like- soft furnishing, plastic, foam or any other such material that produce a large and visible smoke particles. This uniquely designed device helps in preventing false fire alarms with its fast responsive flaming fires or smoldering fire.  

The Wired Smoke & Heat Detector is an INPUT DEVICE used for fire detection which is triggered by Smoke & Heat. The SM-04 is Photoelectric type. It can use independently or as a front-end detector of an alarm system. Upon detection of Smoke & Heat, the SM-04 automatically generates an alarm signal to control panel and Led indication alarm. The unit is RF and EMI Immunity to interferences produced by radio device.

• Model No: QT 222-WSD

Made of poly-styrene plastic -No wiring is required for any connectivity -Area covers 4.5 mtr. with 10 to 11 feet height -Operates on 9V Alkaline Battery -Comes with TEST button -Blinks in every 35 seconds -Has connectivity with TX Booster

We provide Photoelectric Smoke Detector, which is based on an advanced system of fire detection. Tolerant towards impurities that may hamper its performance, the Photoelectric Smoke Detector is designed to function effectively for a long time. SpecialtyAdjustable alarm sensitivityResistant to contaminantsResistant to dust build-upsEnhanced detector sensitivityAutomatic drift compensation Demanded forOfficesCinema hallsMallsHotelsColleges

• battery: 9 V battery
• Radii: 315 m & 433 m
• Radio distance: More than 100 m(open area)
• Alarm volume: More than 85 dB/m

• Power Source: Electric
• Material: Plastic
• Usage/Application: Office Buildings
• Alarm Sensor Type: Photoelectric
• Voltage: 220 V
• Automation Grade: Automatic
• Alarm Current: 56 mA
• Operating Humidity: 50 Hz
• Shape: Round

• Power Source: ELECTRIC
• Color: WHITE
• Country of Origin: Made in India
• Product Type: SMOKE DETECTOR
• Brand: FYRAX , MORLEY, RAVEL, AGNI
• Usage/Application: Office Buildings
• Alarm Sensor Type: Photoelectric
• Automation Grade: Automatic

Aadarsh Technologies is Leading Gloss meter Supplier in India We are complicatedly engaged in offering a commendable range of Gloss Meter. Besides being manufactured from high-grade raw material and latest technology, the offered chamber is inspected properly by our expert professionals. Owing to features like durability and sturdiness, the offered range is exceptionally valued by our precious clients. The offered chamber is available with us in various sizes and shapes at affordable price.

The S2351E photoelectric smoke detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With it’s multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The S2351E photoelectric detector incorporates an Application Specific Integrated Circuit (ASIC). Combined with the latest state of the art optical chamber the detector provides efficient and accurate detection of fires with a high level of resilience to non-fire environmental influences. The S2351E and other detectors in the Series 300 range are backward compatible with the Series 100 detector bases, thus providing the capability to upgrade, extend and maintain existing Series 100 installations.   Features :   Low profile design Low current draw Backward compatible with Series 100 detector range of bases Wide operating voltage 8 to 30V Bi-colour LED detector status indicator Automatic drift compensation Programmable sensitivity Addressable feature Advanced maintenance features via remote hand-held test unit Range of detector bases available Tested and approved to EN54 part 7 (2000) Extended warranty

• Country of Origin: Made in India
• Warranty: 1 Year
• Alarm Sensor Type: Photoelectric
• Brand: Samex Fire Protection Engineers
• Led Indication: Red
• Usage/Application: Office Buildings
• I Deal In: New Only
• Sensitivity: m=0.15- 0.5dB/m-1
• Voltage: DC 12-32V
• Alarm Current: 40-50mA

• Voltage: 12 V
• Body Material: Plastic
• Power: 4 W
• Wireless Frequency: 50 Hz
• Alarm Current: 35mA
• Shape: Round
• Weight: 100 to 200 gm
• Noise Level: Max. 75 dB
• Working Temperature: -15 to +50 degree C