Slump Cone
Get Price Quote
We are offering slump cone.
Ecotab Digital Tablet Hardness Tester
Get Price Quote
Best Deals from Testing Equipment
Grammage tester
Get Price Quote
1 Piece (MOQ)
Short Span Compression Tester
Get Price Quote
The short span compression tester helps measure the compression strength of the routing and liner. The strength determines the ability of stacking of the corrugated boxes. If you aim to produce strong and quality boxes with minimum use of raw materials, use this machine. We at Premier International provide our customers with good quality products that will help to increase your production and quality of the products that you manufacture in your company. Our company manufactures its products under the supervision of experts and professionals who are working in this industry for a long time. There is no chance of errors in our machines as they are quality tested and approved by qualified engineers. There are several advantages of using our short span compression tester. Some are as follows. • Easy To Use It has an auto start and a photocell to detect the presence of the sample. It starts measurement and therefore it is a hands-free operation. • High Reproducibility And Precision The measurement unit is improved for better reproducibility and precision. • Last Production Feedback It has a moisture sensor for correct measurement value and to provide strength for the standardised moisture content. Therefore, get the best quality machines from our company as we are the best short span compression tester supplier, Uttar Pradesh, India.
CT Test Set (30 KA)
Get Price Quote
The CT Test Set (30 KA) can conduct on-site bus-type generator and current transformer testing, which are rated at 10-50kA. The indirect CT testing determines ratio and angle errors by comparing one test point. The other test point errors are tallied from CT running idle voltage-current curve with an open primary winding. The CT Test Set (30 KA) includes CT Test Set 5kA and CT VCC Converter. Steps : Determining ratio and angle error of the instrument-class current transformer (ICT) under test according to a standard test pro¬cedure, e.g. at a 20% of nominal current value. Constructing a Voltage-Current curve for ICT-under-test secondary winding throughout the whole current operating range from 01 to 120%. Determining the values of ICT errors from the Voltage-Current characteristics with consideration for the systematic error introduced into the ICT errors by transformer core material.
MELT FLOW mvr tester
Get Price Quote
As per ASTM D1238 - "A" & “B” Method and ISO-1133. MELT FLOW INDEX TESTER - Model: AE-MFI-A-MC Temperature Range: Ambient to 400 °C. Resolution: 0.1°C. Accuracy: +- 0.1°C. Timer Range: 999 Seconds. Resolution: 1 Second. Sample Cutting: Manually. Weights: 2.16 Kg, 5 Kg. (other optional). Accessories: Standard Accessories. Paint: Powder coated. Supply: 230 VAC 50 Hz.
Portable Hardness Tester
Get Price Quote
Portable Hardness Tester Leeb 180 can be widely used for measuring metal hardness of almost all ferrous and non-ferrous metal materials for scale of Leeb hardness, Rockwell C & B, Brinell, Vickers, Shore and Strength. Portable metal hardness tester model Leeb 180 is based on the principle of Leeb hardness testing theory, it can be used to detect a variety of metal materials. Leeb 180 portable digital metal hardness tester has accurate and stable measurement value. Leeb 180 hardness tester has new design, compact, lightweight hardness tester. Hardness tester has easy measuring in high altitude operations. Direct display of hardness scale, freely convert between HRB, HRC, HV, HB, HS, HL. Leeb Hardness Tester has LCD Screen, with high bright back light, easy operating in the dark and suitable for testing at any angle, even upside down. Digital Hardness Tester Leeb 180 is operated with 3.7V rechargeable lithium battery. Leeb Portable Hardness Tester can be used for continuous working period of 40 hours, standby time no less than 100 hours. It has low power consumption: Auto sleep, Auto power off to save energy.
DPM Module
480 Per Piece
1 Piece (MOQ)
digital temperature meter
Get Price Quote
We are offering digital temperature meter etc. the company is counted amongst the most credible suppliers of digital temperature meter from ahmedabad, gujarat. We offer handheld and contact type digital temperature meters that are sourced from the trusted manufacturers of india. Features such as easy to use, long life and reliable performance make digital temperature meter popular among clients. In addition, we offer the best deal to avail our digital temperature meter.
Phyzer Type Tablet Hardness Tester
Get Price Quote
1 Piece (MOQ)
horizontal tensile tester
100,000 - 250,000 Per Pcs
1 piece (MOQ)
Tensile strength, the maximum tensile force developed in a test specimen before rupture on a tensile test carried to rupture under prescribed conditions. Tensile strength (as used here) is the force per unit width of test speciman. Stretch, the maximum tensile strain developed in the test specimen before rupture in a tensile test carried to rupture under prescribed conditions. The stretch (or percentage elongation) is expressed as a percentage, i.e., one hundred times the ratio of the increase in length of the test specimen to the original test span.Tensile energy absorption (TEA) the work done when a specimen is stressed to rupture in tension under prescribed conditions as measured by the integral of the tensile strength over the range of tensile strain from zero to maximum strain. The TEA is expressed as energy per unit area (test span x width) of test specimen.Tensile stiffness, the ratio of tensile force per unit width to tensile strain with in the elastic region of the tensile strain relationship. The elastic region of the tensile strain relationship is the linear portion of the load elongation relationship up to the elastic limit. The elastic limit is the maximum tensile force above, which the load elongation relationship departs from linearity. (Tensile stiffness is numerically equivalent To E Where E is the modulus of elasticity and is sample thickness).Breaking length, the calculated limiting length of a strip of uniform width, beyond which, if such a strip were suspended by one end, it would break of its own weight.Horizontal Tensile Strength Tester meets the requirements laid down in the testing standards as per TAPPI standardsTechnical Specifications : Mains Supply - 220 Volts ±10%, 50 cycles (if not otherwise specified in your order and acknowledge by us) Load Sensor - 50.0 kg. or depend on requirment Measuring Range - 499.9N Accuracy - Better than ± 1% of force reading, but not better than ± 1 . Display - lcd display Clamps - Tightening clamps for 15 mm wide strips by pneumatic Strip Dimension - 15 x 180 mm Clamping length - 100 150,180 mm Instrument Air - 300 kPa Computer Output - com port to transfer the data on pc Power Requirement - Capacity 300 Watt Deformation Speed - Selected/Variable Automatic return of platens after rapture Electronic overload protection at load cell capacity.
DIGITAL PH METER WITH MANUAL TEMPERATURE COMPENSATION
3,900 Per Piece
1 Piece (MOQ)
Digital pH Meter With Manual Temperature compensation and combination pH Electrode, 3 ½ digit LED Display. Useful for pH and Redox potential measurement.(Table Model).
Panel Meter
Get Price Quote
We provide an ample range of panel meter that includes both Analog Panel Meter and Voltage Panel Meter. We are counted among the supreme Panel Meter Manufacturer and Exporters from India. General Information: - ME AC & DC Panel type Ammeter & Voltmeter panel meters are used on switch board motor and control gears and control panels for a measurements of electrical quantities like current , voltage, power ( Active , Reactive ) or the power factor of the meter These are light in weight and their construction permits them to left connected/wired in the circuits for continues use because of their negligible power loss and rugged construction. These instruments can be moving coil, Moving Iron or dynamometer type and have method of indication by means of deflecting pointer only. These instruments are manufactured to meet the requirement of IS 1248/83. Construction: - All the instruments are manufactured from the best quality material to give a satisfactory performance over a long period. These instrument either in Square Flush type, Round Flush type equipped with the dust & moisture proof casing. 144 Sq. mm Flush , 96 Sq. mm Flush , 72 Sq. mm Flush and 2.1/2 Round Flush , 4 Round Flush meters of moving iron, moving coil type have bakelite or ABS moulded case, base., these instruments are supplied with white dials and black scaling in order to easy legibility. The stamping is also adequate enough to read from reasonable distance. The moment is light in weight and is effectively secured between two saffire jewels. The precisely ground pivots are been used for minimizing the friction and sustain accuracy in vigorous field condition. The effective oil damping provides uniformly control torque and brings the indicating pointer to its final deflecting position without much oscillation. All the metal parts are adequately plated to suit the tropical condition. Instruments are effectively shielded from external magnetic effects and electrostatic influences. All the instruments have zero setting devices in the front except power factor meters. Calibration:- The quality control and inspection at every stage of manufacture at our works enables the meter to pass the Time Test. The qualified staff and the expert supervisors calibrate each and every instrument individually for the finest accuracy. The scaling and marking of the instrument are strictly as per the specified standards. The accuracy is corresponding to full scale deflection and is very effective up to 1/5th of the full scale deflection in moving iron meters and up to 1/10th of he full scale deflection in moving coil and dynamo meter type instruments.
ACCU PH-3 & ECO pH Meter
Get Price Quote
1 Piece (MOQ)
Accu pH - 3 is a micro-controller based bench top pH meter for measurement of pH, mV and temp. with graphic LCD display, easy to use operation ,making error free precision readings. It is advanced 5 Point pH calibration meter with auto buffer recognization & automatic temperature compensation.This is high resolution pH meter having pH resolution as 0.001 pH & the dimensions are just 14.2 x 19 x 5.3 cms. With PC connectivity facility & GLP compliant features it meets the requirements of all modern laboratories. ORP measurements can be done by connecting ORP electrode. In this case the pH meter will function as pH ORP Meter.
Vickers Hardness Tester
Get Price Quote
1 Set(s) (MOQ)
'VMC' Computerised Vickers Hardness Tester is a simple and accurate means to automatically measure the diamond indentation and give Vickers hardness number. The Computerised Vickers Hardness Tester are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These tester strictly confirm to IS 1754 - 2002. The operation of the Computerised Vickers Hardness Tester is automatic with motorized loading/unloading. The weight selection is by a mechanical dial. Technical Data Total Loads : 5, 10, 20, 30, 50, kgf (1Kg optional)Max. Test Height (mm) : 200Diagonal least count (mm)Diagonal measuring range (mm) : 0.001, 0.05 to 0.5Throat depth(mm) : 135Machine Dimension (Approx.)mm : L 585 x W 290 x H 860Weight (Approx.)mm : 70 kg.Power Supply : 220VAC, 50Hz, 1Phase The software includes Online indentation setting and focusing on PC monitorFacility for Auto / Remote Auto / semi Auto / Manual modes of operationWell managed database saves readings W.R.T. batch and certificateReport generation in the form of certificate and graph with variation and histogramFacility for calibration and check of calibrationAdvance image processing algorithm implemented for automatic measurementStatistical data is provided for a batch results and include standard deviation, mean, medium, minimum and maximum readingMeasuring scale Calibration / Verification on PC monitor PC requirements 2 gigahertz (GHz) or faster processor1 gigabyte (GB) RAM minimumMicrosoft Windows 7/Vista/XP operating systemDisplay screen resolution minimum 1024 by 768 pixelsTwo free USB 2.0 ports Accessories Standard Test Block 1 No.Diamond indentor 1 No.Weights 1 SetFlat Anvil 1 No.Vee-type anvil ( Small & Big ) 1 No. eachSpanners 1 SetElectric Cord & PC interface cord 1 No. eachUSB Video Capture 1 No.Software CD 1 No.Instruction Manual 1 Book.
Digital Bursting Strength Tester
Get Price Quote
Bursting strength tester is a most important product use in paper and board mills for show bf (paper strength), we use high quality pressure gauge and high quality electric motor, we are manufacturere so we give very competeive price, we provide calibrated aluminum foil and diaghpram. We assure we manufacturing all types of bursting tester use in pharma industry, paper industry, and fabric industry.
Friability Test Apparatus
5,200 - 8,000 Per Piece
1 Piece (MOQ)
DIGITAL SURFACE ROUGHNESS TESTER
111,000 Per Piece
Digital PH Meter
9,000 Per Piece
1 Piece (MOQ)
Post Free Ad
4.0
