Heat Resistant Paint Dealers

A single pack high performance heat resistant aluminium paint based on silicone resin medium for protection of steel surface operating between 400˚C – 600˚C dry heat.

• Finish: High Sheen
• Surface of Application: Concrete roof top, metal sheet, cement sheet
• Shelf Life: 5 years
• Flash Point: This product comes waterproofing content
• Construction temperature: 20 degree
• Coats required: 3 coats
• Coverage (Sq. feet/Litre): 75-80 sqft/ kg depends on surface

• Certification: ISO9001:2008
• Packaging Type: Can
• Country of Origin: India

manufacturer of heat resistant specialty coating : corro tech hr 650 – high temperature heat resistant coating designed to withstand upto 650 deg. c.  this is a silicon resin based coating with aluminium flakes. it meets eil specifications f-12.  this product is eil approved chemi tech 450 ht-  two component high performance heat resistant coating for protection of metal surfaces from film integrity, corrosion and weathering resistance operating at temperatures upto 400ºc.  low dft corrosion resistant, heat resistant coating based on hybrid silicon resin technology chemi tech ht 200 – heat resistant coating - multipurpose epoxy coatings provides hard wearing chemical resistant, easy to clean surface. it has outstanding adhesion, film integrity, up to 175˚c temperature . it can be applied to horizontal as well as vertical surfaces to forms a very thick film. cerami tech htx- ceramic enhanced high temperature service epoxy ceramic coating - high performance ,solvent free, two component ceramic reinforced composite modified blend of epoxy resins, fine ceramic reacted with a curing agent to produce excellent resistance to erosion and corrosion combined for high temperature immersion subjected to extreme corrosive or severe fluid flow condition with optimum physical and mechanical strength. designed to protect chemical and corrosion attack in high temperature surfaces such as pipes, tank linings, pumps, impellers, valves, heat exchangers dealing in hot water, steam, hydrocarbons, acidic and alkaline solutions. it can also be used  for internal tank coating for storing refinery intermediate/ petroleum products / hydrocarbon . corro tech hrp 100 (s) – third generation single component high performance, high build coating based on methoxy functional inorganic copolymer.  it can be applied on st2 surface and can withstand upto 380 deg.c.  

• Color: Blue, Bronze, Copper, Gold, Orange, Pink, White
• Application: Brush, Roller, Spray Gun

  • Product Description   A two pack high luster Aluminium paint excellent durability and weather    resistance properties. The product is designed on oil modified synthetic    resin and aluminium pigment base. Heat resistance upto 240°C.• Uses   Recommended for use outside storage tank, funnels, chimneys, Industrial    plants, pipe lines, electric polls.

We are Pune(India) based entity and actively involved in offering nothing short of the best quality products in the market. Buyers are free to place orders and can expect timely deliveries of the same.   Trade Information Product Code -  H R 400 Brand Name - UGAM Minimum Order Quantity - 10 Unit of Measure - Liter/Liters Main Domestic Market - All India   Highlights The Ugam H. R. Paints are provided by us is capable of withstanding high temperatures. UGAM H. R. Paint Products are having wide range of heat resistance ranging from 400, 600, 1200 to 1800 degree Celsius It is mainly used as heat resistant paint up to 400 degrees Celsius. Ordinary paints do not withstand the temperature up to 400 degrees Celsius and hence application of All products are being used by major industries for ovens and furnaces Heat resistant paints is required for such hot surfaces. It is used as heat resistant coating suitable upto 400 degrees Celsius. It is suggested mainly for continuous temperatures between 160 and 360 degrees Celsius. In case of humid and salty weather special PRIMER FOR UGAM Heat Resist 400 is used. This is having silver colour and is widely used in industries for chimney paintings and exhaust pipes painting. This special coating is generally for exterior of furnaces to achieve proper heat despation of exterior surface thereby providing increase life furnace. Then this coating is applied for protection of primer as well as aesthetic look to the surface. These are unique range of products and are import substitutes saving almost 50 percent cost. UGAM H. R. PAINTS are being used by major companies like Mahindra and Mahindra Ltd., Bharat Forge Ltd. Tata Yazaki, Tata Toyo Radiators Ltd etc. UGAM H. R. PAINTS can be designed to your use and requirement The Heat Resistant Paint is formulated in tune with the laid international quality standards. Our Ugam Heat Resist 200 is accurately prepared in accordance with the laid international standards. We not only say but in literal sense execute timely deliveries without any delays. Our Heat Resistant Paint (UGAM Resist 400) is economically priced! The technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use. Additional Information: Item Code: UGAMPUSICOMPOSITEHR400

• Type: Heat Resistant Paint
• Color: Multicolor
• Application: Interior Use, Painting Use
• Application: Brush, Roller
• State: Liquid
• Packaging Type: Can, Plastic Bucket
• Packaging Size: 1-5 L, 10-15 L, 15-20 L, 20-25 L, 200ml, 300ml, 5-10 L

Supported by an industrious network, our organization is able to serve to patrons all over Mumbai(India) and other marketplaces without problem. Product packaging is done using industrial grade materials by us to ensure safe and undamaged delivery of consignments. Further, we provide tailored packaging solutions. These Solvent Based Heat Resistant Paints are largely appreciated for their mesmerizing shades.  

• Country of Origin: India
• Color: Silver
• Packaging Type: Can
• Finish: High Sheen, Mild Sheen
• Speciality: Heat Resistant
• Packaging Size: 4-20 LTR
• Brand Name: SHALIMAR PAINTS LTD.

• Country of Origin: India
• Type: Heat Resistant Aluminium Paint
• Application: Brush
• State: Liquid
• Packaging Type: Can
• Finish: High Sheen
• Speciality: Heat Resistant

It is single pack Aluminum Paint based on special resin. It has good anti -corrosive properties along with dry heat resistance up-to 400°c.

• Type: Heat Resistant
• Quality: High
• Durability: Long Life
• Maintenance: Low
• Shelf Life: 5 Years
• Construction Temperature: 20 Degree
• Coats Required: 3 Coats

• Type: Heat Resistant
• Application: Industrial
• Pigmentation: Aluminium
• Durability: Long Life
• Maintenance: Low
• Resistivity: Corrosion & Chemical resistant

A single component, high temperature coatings, based on moisture curing silicone binder. On offshore facilities there is a continuous demand for coatings that maintain their performance despite exposure to a variety of environmental conditions and various temperature fluctuations from the substrate. The company has developed a range of heat resistant, high performance, high quality coatings meeting the latest requirements of the offshore industry. The coatings can be applied on pipes and steel surfaces as well as on process equipment. The coatings protect the steel from the influences of thermal cycling, which is one of the most extreme challenges faced by coating systems. For the protection of steels from corrosion on areas including flare stacks, chimneys, exhausts, vents, and pipework temperature upto 600©. Some of the most challenging coatings situations that exist in industry today concern heat resistance. There is a continuous demand for coatings that can maintain their function despite exposure to the extremely high operational temperatures found in the power, offshore and petrochemical processing industries. We offers a range of high quality, high performance heat resistant coatings developed specifically to meet this challenge, able to cope with extremes of temperature and deliver a dependable long-term performance for both new construction and maintenance alike.   Product Features : A heat resistant moisture curing silicone aluminium Finish meeting all maintenance requirements up wide range of temperature. One component Aluminium Pigmented Heat resistant on SA 2.5 blasted Steel Heat resistant on ST3 powertool cleaned steel No post-cure required Application direct to metal or zinc silicate primer   Applications : The products is widely used and respected in all key industry sectors, meeting the very demanding challenges required to protect major assets. Performance you can trust All our coatings are manufactured to world-leading standards. So you can rely on a consistent performance from each and every coating. Petrochemical : Piping, Heat Exchangers, Maintenance, Process equipment Power : Piping, Stacks, Process equipment Offshore : Piping, Heat Exchanger, Maintenance, Flare Stacks

• Brand Name: DESAI COAT
• Form of Paint: Liquid
• Application Surface: Metal

• Packaging Type: Tin Bottle
• Packaging Size: 430 Ml

Features of HR 567 Heat Resistant Spray HR 567 Heat Resistant Spray is High heat resistant coating, For all exposed metal surfaces, especially where extreme heat resistance is required, air dries quickly on application to form long lasting finish resistant to surface temperatures reaching as 700°C. Rapid drying to a very tough finish Very good resistance to moisture and chemicals good anti-corrosion characteristics Excellent adhesion to composites and aluminium   Application of HR 567 Heat Resistant Spray Heat resistant paints are designed to withstand high temperatures of up to 700°C, Which makes them ideal for use on fireplaces,  chimneys, pipes,  engines,  exhaust pipes, log-burners and many more metal / metallic items requiring heat proof treatment.   Direction of HR 567 Heat Resistant Spray Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. Sand intact coatings to roughen the surface slightly. The surface must be clean and dry during application. Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Hold can approx. 30 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply several thin layers at a few minutes interval to achieve adequate coating thickness. After use turn can upside down and press spray button for 2 – 3 seconds to clean valve.   Precaution of HR 567 Heat Resistant Spray Contents are Extremely Flammable and Under Pressure, Do not punctured ,may explode if heated. Do not apply while equipment is energised,Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Prevention : Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Pressurised container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source,live circuits. Harmful in contact with eyes. Prolonged exposure may cause chronic effects. May cause drowsiness and dizziness Response : IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. IF IN Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.   Storage of HR 567 Heat Resistant Spray Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122 °F. Store in a well-ventilated place. Keep container tightly closed. Keep Out of Reach of Children.

• Application: Brush, Roller, Spray Gun
• Finish: High Gloss
• Packaging Size: 1-5 L
• MOQ: As per requirement
• Shelf Life: Longer
• Quality: Unmatched Quality
• Durability: Long Life

• Packaging Size: 10 Liters & 20 Liters
• Color: Aluminimum
• Packaging Type: Bucket
• Application Surface:: Metal
• Coverage (Sq. feet/Litre): 80
• Waterproof: Yes

We offer an array of Heat Resistant Paints that is available in different colors and shades as per the demand of the valued clients. These Heat Resistant Paints are extensively used in different industries for coating machines and equipment such as exhaust systems of automotive sectors, chimneys, silencers of D. G. Sets and tankers to control loss of evaporation. The paints can resist the temperature up to 600oC apart from offering resistance to different kinds of chemicals.

We offer optimum quality Heat Resistant Paint in India that can resist heat up to -250oC to 600oC Our paints can be used as heat resistant coating for chimney stacks, pipes, petro-chemical & water tanks, boiler fronts, duct work, piping and furnace structure. These paints give good performance in external and internal application in offices, buildings, factories, warehouses and industrial plants. Due to its higher reflectance value, this paint has special use in coating exterior of storage tanks in oil industry. Properties :Heat resistant up to 250oC to 600oC CelsiusExcellent performanceDurableWater resistantColor retentionCorrosion resistance Applications :Chimney stacksPipesPetro-Chemical & water tanksBoiler frontsDuct workPipingFurnace structure

Heat Resistant Aluminium Paint 600°C is an advanced high-temperature coating designed to withstand extreme heat conditions up to 600°C (1112°F). This specialized paint offers exceptional durability and thermal stability, making it ideal for protecting metal surfaces exposed to intense heat in industrial, automotive, marine, and residential applications. Formulated with premium heat-resistant resins and aluminum pigments, it provides superior heat reflection and protection against corrosion, oxidation, and thermal degradation. Key Features:- Extreme Heat Resistance:-Capable of enduring continuous exposure to temperatures up to 600°C (1112°F) without degradation. Heat-Reflective Properties:-Formulates a protective barrier with aluminum pigments to reflect heat away from surfaces, reducing thermal stress. Durable Protection:-Provides a tough and resilient coating that safeguards metal surfaces from corrosion, UV rays, and chemical exposure. Versatility:-Suitable for various high-temperature applications including exhaust systems, engine components, industrial ovens, furnaces, and more. Long-Lasting Performance:-Ensures longevity and reliability in demanding environments where heat resistance is critical. Ease Application:-Applies smoothly with brush, roller, or spray equipment, ensuring uniform coverage and adherence to metal substrates.

• Type: Heat Resistant Roof Paint
• Brand Name: Excel Coal Coat
• Place of Origin: Udumalpet  
• Quality: High
• Condition: New, Good

Get in touch with us, if looking for a high quality EXCEL CoolCoat Heat Resistant Roof Paint at moderate prices! We are counted among top-notch Manufacturers, Exporters and Suppliers of EXCEL CoolCoat Heat Resistant Roof Paint from Tamil Nadu, India. Being a client-centric firm, we strive to deliver the best in line Roof Paint to our valued patrons. For this, we check it for quality prior to final dispatch.   More About EXCEL CoolCoat Heat Resistant Roof Paint The built environment includes large areas of roof surface which can absorb the Sun's radiation to act as solar radiators. It makes sense to design a barrier that combats the specific Heat Source, and that means reflecting the Sun's rays BEFORE they're absorbed as heat. By reflecting more of the Sun's radiation, Dulux Cool Roof with InfraCOOL Technology can keep surfaces cooler to help reduce heat build up in roof spaces that can filter into living zones The extent to which InfraCOOL® may translate to internal benefits in warm conditions will depend on variables such as colour choice, building design (including roof pitch, materials & window placement), insulation, ventilation, occupancy use, shading, location, climate and ratio of exposed roof area to floor area. Colour choice can still make a difference. Cool Roof White and Pastel shades are the coolest choice overall.

Ours is a quality-driven organization that is engaged in offering only high-quality products. Thus, we use superior grade raw materials for the fabrication of our entire range. Buy the best quality Heatguard Heat Resistant Paint at rock-bottom prices from us. We are a reckoned name in the town.   Details : Product - Heatguard ( Black & Silver ) Product Description - Room temperature cure heat resistance paint. Application Segment - Chimneys, Mufflers, Ovens, Barbeques, stoves, heat exchangers, Klins, boilers Coverage - 120 - 150 Sq. Ft /Ltr

Heat Resistant Paints are single component, high temperature coatings, based on moisture curing silicone binder. On offshore facilities, there is a continuous demand for coatings that maintain their performance despite exposure to a variety of environmental conditions and various temperature fluctuations from the substrate. The Heat Resistant Paints are high performance coatings that effectively meet the latest requirements of the offshore industry. The coatings can be applied on pipes and steel surfaces as well as on process equipment. The Heat Resistant Paints protect the steel from the influences of thermal cycling, which is one of the extreme challenges faced by coating systems. For the protection of steels from corrosion on areas including flare stacks, chimneys, exhausts, vents, and pipework temperature up to 600°C. Some of the most challenging coatings situations that exist in industry today concern heat resistance. There is a continuous demand for coatings that can maintain their function despite exposure to the extremely high operational temperatures found in the power, offshore and petrochemical processing industries. We offer a range of high quality, Heat Resistant coatings developed specifically to meet this challenge, able to cope with extremes of temperature and deliver a dependable long-term performance for both new construction and maintenance alike.Highlights Heat resistant moisture curing silicone Aluminium Pigmented finish Applicable in wide range of temperature One component   Heat resistant on SA 2.5 blasted Steel Heat resistant on ST3 powertool cleaned steel No post-cure required Directly application on metal or zinc silicate primer ApplicationsThe product is widely used in all key industry sectors, meeting the very demanding challenges required to protect major assets. All our coatings are manufactured in compliance with world-leading standards. Therefore, you can rely on a consistent performance from each and every coating. The application areas of Heat Resistant Paints are: Petrochemical : Piping, Heat Exchangers, Process equipment, Maintenance etc. Power : Piping, Stacks, Process equipment etc. Offshore : Piping, Heat Exchanger, Maintenance, Flare Stacks, etc.

• Type: Paint
• Certification: ISO9001:2008
• Application: Brush, Roller
• Color: Blue, Bronze, Copper, Gold, Multicolor, Orange, Pink, White
• State: Liquid
• Packaging Type: Can
• Finish: High Gloss, High Sheen, Mild Sheen, Soft Sheen
• Packaging Size: 1-5 L, 10-15 L, 15-20 L, 20-25 L
• Brand Name: Avudai
• Country of Origin: India

• Packaging Size: 400 L
• Packaging Type: Drum
• Form Of Paint: Liquid
• Dry film thickness: 20-30 Micrometer
• Wet film Thickness: 45-65 Micrometer
• Theoretical spreading rate: 22.5 m2/l

• Brand Name: Para Fine
• Grade: Industrial Grade
• Appearance: Black
• Packing Type: Can / Barrel