Panel Air Conditioners Dealers

Ductable Panel Air-Conditioners are utilized when the volume of the panel to be cooled is large and the cooling requirement is high. Here the panel doors may not be able to host large capacity panel mountable coolers as they would weigh more. To offset this disadvantage a Ductable Panel Air Conditioner is recommended. A Ductable Panel Air-Conditioner with double inlet centrifugal blower cools the panel components uniformly and avoids hot pockets insidethe panel. These units are equipped with castors for mobility.    General Specifications : Compressor - Reciprocating. Hermetically Sealed Condenser and cooling Coil - Fin & Tube Type Condenser & Evaporator Fans - Backward / Forward Curved Blowers / Axial Fans Sheet-metal Body - Powder Coated CRMS Electrical - MCB as Mains : Digital Temperature Indicator cum Controller Lapp cables and Wago Terminal Connectors Standard Colour - Siemens Grey (RAL 7032)

• Type: Panel Air Conditioners
• Cooling Capacity (Watt): L35L35
• Power Consumption: L35L35, L35L50

Specially designed for telecom Outdoor application , this is an excellent product for all telecom Outdoor cabinets , battery chillers,BTS shelter. The 48VDC airconditioners are equipped to operate on direct 48VDC , 24 VDC voltage. The variable speed , compressor and product design provide highest level of performance ,efficiency and reliability. The unit is available in range from 300 W to 5000 W.Units are designed as wall mount , but options are available on other types on demand. PAC03-D PAC05-D PAC07-D PAC10-D PAC15-D PAC20-DFeaturesG1 Powder coated body High Sensible cooling High Static backward curved fan Fully programable micro-controller Inbuilt safety for High Low temperature & voltage Over Underload Protection. High Low Pressure switch Vandal proof for out door application Down discharge Alarms for critical failure Can connect to solar application High EER No need for inverter Variable speed compressor, fans and DC operation gives unmatched combination for high efficiency OPEX saving while free and active cooling

• Frequency: 50 Hz
• Usage/Application: For Panel Cooling
• Voltage: 120 /230V
• Power: Electricity
• Color: Silver Gray
• Mounting Type: Wall Mounting
• Surface Finished: Polished
• Material: Mild Steel

After giving tough competition to our contemporaries in Gujarat(India), we have now come forth to challenge the providers in other markets. We have a strong security system that helps us to make online transactions possible without getting worried about the security. You need to share your details with us and we make sure that the details are kept confidential.

Unique in the field of Air conditioning for residential, Industrial, privatecommercial maintenance services, Our firm has an integrated approach in the planning and providing good services to our clients. We provide Services and repairing on chargeable biases.We repair and Service only out of Warranty products. Ac repair service, Ac AMC, Ac Installation, Water cooler repair service, Deep freeze repair service, Fridge repair services, HVAC repair service, AHU repair service, Chillier repair service, Ducting work. Also we are providing multi brand Private out of warranty (on chargeable basis) Fridge Air conditioner Water cooler repair services

Himalaya’s panel air conditioner units are excellent match to your electrical and electronic panel cooling needs. These units are designed specifically understanding the high sensible cooling requirement and able to run non stop for long hours. High reliable components and electronics supported by high ambient design ensure your cnc machines work smoothly all year round. The model is available with various capacity ranged from 600 w to 5000 w on single chassis . The mounting options are available as door mount or side mount. Application: cnc machinerv textile machine telecom odc small server electronic panel telecom odc product range: pacs-500-ds pacs-1050-ds pacs-1550-ds pacs-2550-ds pacs-3500-ds pacs-5250-sp pacs-7000-sp

  Panel Air Conditioner Panel Air conditioner utilizes closed loop design to maintain clean and cooled air in electronic panel. To achieve this two entirely separate air circulation circuits are provided in Panel Air Conditioner. One circulation circuit sucks hot clean air from down of electronic control panel in to panel air conditioner and after passing it across evaporator of Panel Air Conditioner becomes cooled and dehumidified. Same cooled and dehumidified air is supplied to electronic control panel from top of the Panel Air Conditioner. The second circulation circuit makes use of ambient air to remove heat out of condensers and then to atmosphere from panel air conditioner. These two air circuit are separated by a partition in Panel Air Conditioner to ensure closed loop design and to keep electronic components of control panel away from dust and humidity present in factory shop floor. Application of Panel Air Conditioner CNC Machine Tools Robotics Control Panel Automation Equipments Food Processing Industry  

Electrical Panels in the industrial equipments like CNC machines, thermal Power Plants super computers etc., Dissipate heat during operation, if the working temperature of the electronic components goes beyond the tolerable limits, the components present inside the control panel could malfunction & deteriorate earlier than predicted, our panel air conditioners are designed to maintain 27 C. We have various modes and capacities to suit specific requirement. These air conditioners perform only on completely sealed / air tight cabinets.   Application : Industrial Computer Panels CNC Control Panels MCC / Distribution / Telecom Panels Programmable Controllers Motor Control Centers

we hold prominence in the field of the manufacturing panel air conditioners that are tested for performance. These panel air conditioners are precisely designed with closed loops to prevent dust and fumes from entering inside. Use of environment friendly refrigerant makes them the demand of the present time. We make available panel air conditioners with various mounting choices. We offer air conditioners in side mounting, top mounting and stand alone type to suit any type of panel. features high quality crca / ss 304 powder coated bodyhigh performance closed loop designenvironmental friendly 134a refrigerant is usedemerson or equivalent made compressors with high reliabilitymicroprocessor based  digital two set point temperature indicator cum controller (tic)potential free alarm for high and low temperature alerts ( optional )high / low pressure cut-off switcheslubrication free sealed ball bearing motors suited for cnc machine toolstextile machinesfood processing machinerytelecompower generationchemical plantssteel plants pancol mounting arrangement the choice of mounting depends obviously upon the space available for fitment on panel. We offer air conditioners in side mounting, top mounting and stand alone type to suit any type of panel. side mounted : control panels where there is an unrestricted flow of air from one end to other end this type is preferred, so as to ensure uniform cooling of panel. These panels are mounted either on the doors or sidewalls of control panelsstand alone type : the use of side mounted or top mounted panels is not suitable in some cases like for cooling of partitioned panels, where this arrangement is preferredtop mounted : this type is preferred when side mounting or stand-alone type is not suitable. This panel ac is mounted on roof of the control panel advantages of pancol over standard room air conditioners high shf : for panels, due to no occupancy and no positive fresh air intake, the latent heat component is almost negligible, resulting in nearly unity sensible heat factor. Thus the dehumidified air quantity required will be much higher than that available in a room air conditioner of equivalent capacitybigger evaporator coil and evaporator fan : to remove the high sensible heat load effectively, both the evaporator fan and evaporator coil need to be substantially oversized compared to room air conditioners. This increases the first cost of panel air conditioners compared to room air conditionershigh energy efficiency ratio : due to bigger evaporator coils, panel acs operate at much higher suction temperature (approx. 6 to 7oc than room acs) thus eer is improved. Generally energy saving due to panel acs is about 25%reliability : high priority is assigned during design and testing of panel acs to achieve a higher mtbf (mean time between failures)continuous duty operation : standard room acs is designed to run 8 to 10 hours a day whereas panel ac is designed for continuous duty operation round the clock, round the year technical specifications standard modelsrefrigerantcooling capacityratedoverall size wxhxd mmweight in kgwattskcal/hrpower (w)current (a)voltage (v)pancol-250-s-axr 134a2002141501.4230370 x 540 x 18027pancol-500-s-axr 134a5004283502.5230300 x 525 x 27038pancol-600-s-cer 134a6005144402.5230310 x 810 x 26043pancol-1000-s-cer 134a10008575852.7230375 x 950 x 23049pancol-1000-s-ce-1r 134a10008575952.7230395 x 710 x 25563pancol-1500-s-cer 134a150012858754.7230480 x 982 x 30065pancol-2000-s-cer222000171212806.0230440 x 982 x 30070 note : design specifications and technical characteristics are subject to change without notice.

• Nominal Cooling Capacity (Tonnage): 1 Ton
• Brand Name: Hexacool
• BEE Star Rating: 5 Star
• Type: Panel Air Conditioners
• Usage/Application: Panel Cooling
• Series Name: 3500 w
• Model Number: HC
• Refrigerant Type: R-22
• Cooling Capacity (Watt): 3450 Watt
• Condenser Type: Copper
• Voltage: 220V, 230V, 240V
• Frequency: 50Hz
• Phase: Single
• Noise Level Indoor (dB(a)): 38dB
• Noise Level Outdoor (dB(a)): 55dB
• ISEER Ratting: 3.04
• Moisture Removal (Litres/Hour): 50 degree per watt
• Remote Type: Yes optional
• Night Glow Function On Remote Buttons: Yes
• Remote Battery Type: Na
• Auto Restart: Yes
• Air Swing: No
• Power Consumption: Nominal
• Overall Weight: 45 kg
• Brand Name: Hexacool
• Model Number: 3500 w pac
• Tonnage: 1 ton
• Star Rating: 5 Star
• Tower AC Type: Non Inverter
• Power Consumption: Nominal
• Inverter Technology: Na
• Body Material: M.s
• Refrigerant: R22
• Airflow: High
• Area Upto Covered: As per requirement
• Input Power: 230 v
• Type: Panel mounted
• Compressor: Rotary
• Air Circulation: Linear
• Features: Turbo Cool, Energy Saver, 100% Copper, Fix And Lock, Smart Ready, High Energy Efficiency Rotary Compressor
• Size: As per drg
• EER: Na
• Warranty: 1 yr
• Width: Na
• Indoor Unit: Yes
• Operation Range: 15 degree
• Outdoor Unit: Yes
• Cooling Capacity: 3.5 kw
• Indoor Unit Colour: 7035
• Indoor Unit Sound Level: Less than 40db
• Indoor Unit Dimension: Na
• Indoor unit Machine Weight: Na
• Indoor Unit Certified Operation range Cooling: Ce
• Outdoor Unit Colour: 7016
• Compressor Type: Rotary
• Compressor Motor Output: Na
• Outdoor Unit Dimension: Na
• Outdoor Unit Sound Level: Na
• Power Supply: 230v
• Energy Efficiency Ratio: Na
• IDU Dim LxBxH: Na
• ODU Dim LxBxH: Na
• Usage/Application: Panel Cooling
• Country of Origin: Made In India
• Type: Panel mounted
• Brand Name: Hexacool
• Material: Ms

We provide all weather proof, cold rolled sheet steel AC Panel for yard light having digital timer, MCB, Indication Lamp, Push button and terminal connector.

We are offering panel air conditioner. he demand of high productivity has resulted in factory automation at every possible level incorporating cnc machine tools, cim/cam system, high performance industrial drive, robotics, material handling system, control panels, laboratory instruments and automation equipment using state of art electronic hardware. While high productivity level have been achieved, it is not possible to provide clean & controlled environment to the electronic hardware associated with factory automation. Every electronic control system generates heat during operation. Maximum problem occur when such electronic cabinet are placed in hot, dirty and humid area, panel cooler save and protect the costly electronic cabinet against heat, dust and humidity and assure fault free operation of your costly parts of electronic cabinet.

• Voltage: 220V
• Compressor Type: Rotary

I trust this message finds you well . It is my pleasure to introduce Ninaee Electrical and Engineering Pvt. Ltd , a pioneering force in the field of HVAC (Heating, Ventilation, and Air Conditioning) solutions, specializing in cutting-edge rooftop package units.   About Us: At Ninaee Electrical And Engineering Pvt. Ltd. we have established ourselves as industry leaders in designing and manufacturing high-performance rooftop package units Chillers and Panel Air-condition tailored for a diverse range of applications. With a steadfast commitment to innovation, energy efficiency, and customer satisfaction, we take pride in providing HVAC solutions that meet and exceed the evolving needs of our clients.   Panel Conditioning: We understand the critical role of electrical panels in ensuring the smooth operation of your facility. Our panel conditioning solutions aim to maintain the ideal operating temperature for your electrical components, enhancing their reliability and longevity. Custom Solutions: Recognizing that each project is unique, we work closely with our clients to develop customized solutions tailored to their specific requirements. Our team of experts is dedicated to providing comprehensive support from concept to implementation  

Our panel air conditioners are designed to maintain 27 ° c and 50 rh. We have various models and capacities to suit specific requirement. These air conditioners perform only on completely sealed cabinets.

• Brand Name: Advance Plus
• Country of Origin: Delhi  
• Type: Air Conditioner
• Type: Panel Air Conditioner
• Condition: New, Good
• Quality: High

Owing to our excellent Delhi(India), we efficiently make on-time deliveries to the customers. We are a quality driven firm ad thus make sure that the material used for manufacturing complies with high quality standards. As a result of which, the finished products have long service life. Our avant-grade panel air conditioner is available with a quality warranty of 12 months.

• Type: Panel Air Conditioners
• Features: Light Weight, Quick Cooling
• Warranty: 1year
• Body Material: M.s. Powder Coated
• Power Source: Electrical
• Cooling/Heating: Cooling Only

We are among the distinguished names in the industry for supplying and exporting high quality Panel Air Conditioners. The Panel Air Conditioners that we offer are sleek in design and are compatible with any control panel. Our Panel Air Conditioners are easy to maintain and install and are widely used in CNC machines, electronic cabinets and automation systems etc. available in wide range of models, these Panel Air Conditioners are tested by our quality auditors.