PLB HDPE Pipes Dealers

• Color: MULTI
• Country of Origin: india
• Brand: ARI
• Size: 25

• Brand Name: Ambika
• Material: HDPE
• Thickness: 0.17--0.7 Mm
• Length: 10m-30m
• Color: Available In Various Colors
• Shape: Round

Construction : Ambika Permanently Lubricated HDPE Ducts are formed by co-extrusion technique and are used for laying Optical Fiber Cables as under ground ducting / conduits.Material : The base raw material being used for the manufacturing Permanently Lubricated Ducts is High Density Polyethylene. The grade of raw material is Ultra Violet grade and is confirming to IS:7328-1992 & ISO : 2523-1974 or ISO : 1183 & ISO : 1133 and is designated as PEEWA-50T-012 (CACT Approved) and inner layer permanently lubricated material DOW CORNING grade- 50MB002.Characteristic : All the Compatible Fabricated fittings are offered to address system Requirment Available in Orange , Yellow, Red, Voilet, Grey ,Green , Blue, Brown & Black Colors for easy Denitrification . Offered in coils of 200 , 500 & 1000 mtrs length thus reducing the number of joints in network which enables to reduce the cost & times of installation Other coils length & color are available as per customer specification.

HDPE PLB duct pipes are designed and engineered to house the sensitive nerves of Information technology i.e. optical fibers thus enabling information transfer across the globe. Available as per Indian, International Standards or Customers requirements Most Suited for Pulling Optical Fibre Cable (OFC), Telecom, Electrical Lines etc. Size Range: 32/26 mm, 40/33 mm, 50/42 mm Color: Orange, Green, Brown, Blue, Black or as per Customers requirements. Available in Coils upto 1000 Meters Length. Available as per TEC Specifications or Customers requirements Material : Permanently lubricated HPDE Telecom Ducts are manufactured with the superior grade of High-Density Polyethylene materials. HDPE pipes manufactured meets all the requirements of TEC Specifications as well as IS 4984-1995.Lubrication : Permanently lubricated HDPE Telecom Ducts have special lubricated compound on Inner Side for Conveying Optical Fiber cables with extremely low friction. Coefficient of Friction between the inside of the HDPE Duct and the outside of the inserted communication cable does not exceed 0.06. Properties of Lubricant: Is strongly locked into HDPE. It has same physical/mechanical properties as HDPE except low Coefficient of Friction value which is less than 0.06. Is evenly distributed around the bore and along the length of duct. Does not react with water, hence it is possible to clean the duct by water stream in case of any obstruction/accident. Have same frictional properties during life of the duct.   Salient Features of HDPE Duct: Environment Stress Crack Resistance (ESCR) Impact Resistance Crush Resistance Low Coefficient of Friction Temperature Resistance Ultraviolet (UV) protection   Product Applications:HDPE Ducts are suitable for installation in the field dirt trenches, under sidewalks, roads, within communication networks, between communication centers and between cities. They can also be used in branch networks between cells, distribution cabinets, poles, in walls and within subterranean networks of homes, allowing the insertion of optical or copper communication cables, as well as TV/cable aluminium co-axial cables. Cables can be inserted in through the pipe by blowing, with an internal air-pressure up to eight bars.

• Color: Orange
• Size: 33-40
• Product Name: PLB PIPES

Established as a Partnership firm in the year 2013, we “Signor Polymers” are a leading Manufacturer of a wide range of HDPE Pipe, HDPE Coil Pipe, Polyethylene Pipe and MDPE Coil Pipes. Situated in Rajkot (Gujarat, India), we have constructed a wide and well functional infrastructural unit that plays an important role in the growth of our company. We offer these products at reasonable rates and deliver these within the promised time-frame. Under the headship of our mentor “Mr. Sanjay Indrodia”, we have gained a huge clientele across the nation.

Polyethylene formed by the polymerization of ethylene, are tough, waxy materials of varying flexibility. For pipe applications, they are generally formulated with only an anti-oxidant and some pigment or other substance designed to screen out ultraviolet radiation in sunlight.Polyethylene pipe products are protected against deterioration from exposure to ultraviolet light and weathering. Black pipes contains 2 to 3% carbon black to protect them from UV deterioration.

• Material: HDPE
• Color: Orange, Green, Brown, Blue, Black
• Application: Telecommunication,Computer Network,Automatic Signaling,Railways Information Network
• Size Range: 32/26 mm, 40/33 mm, 50/42 mm

We undertake online payment procedures which are completely safe and hassle free. The online transactions are supported by advanced security features. In our well-structured warehouse, we store the entire lot in a secured manner under the strict supervision of our expert warehouse personnel. Moreover, our facility is installed with all required amenities needed for safe storage.

• Type: HDPE PLB Duct
• Brand Name: Kundir, Kuber
• Material: HDPE
• Thickness: 3mm
• Length: 500 meter
• Application: Telecom Duct
• Color: Blue, Orange, Green
• Outer Diameter: 40mm
• Country of Origin: Delhi, IINDIA
• Model Number: HDPLB
• Green: Blue

• Country of Origin: India
• Length: 4000-5000mm
• Application: Undergrounding
• Grade: IS
• Feature: Excellent Quality
• Finishing: Polished
• Type: Plb Hdpe Pipes
• Material: HDPE
• Shape: Round
• Certification: ISI Certified
• Color: All
• Thickness: 3-6mm
• Grade: IS
• Certification: 9001:2015

• Material: HDPE
• Finishing: Non Poilshed
• Shape: Round
• Country of Origin: India
• Color: Multicolour
• Wire Size: All Size

• Material: HDPE
• Shape: Round
• Color: Available in many colors
• Finishing: Polished
• Length: 6 m
• Grade: PE 100
• Diameter: 32 mm
• Pressure Rating/ PN Class: PN 8

• Material: HDPE
• Finishing: Polished
• Shape: Round
• Color: Black
• Application: Pipe Fittings
• Thickness: 5-10mm
• Country of Origin: India
• Fitting Type: Tee

• Material: HDPE
• Shape: Round
• Color: Black
• Application: Agriculture
• Certification: ISI Certified
• Length: 100 to 300 mtr
• Feature: Perfect Shape, High Strength, Fine Finishing, Excellent Quality, Crack Proof
• Thickness: 4 kg to 10 kg
• Country of Origin: India

jain hdpe pipe size available 32 mm to 200 mm

Our product range includes a wide range of HDPE PLB Duct For Networking, HDPE Telecom Duct and HDPE PLB Duct.

HDPE PLB Ducts are manufactured using high grade of HDPE with inner layer of Anti Oxidant content and other recommended additives. The inner layer is silicon coated which minimizes the friction between OFC and the duct during the process of blowing the cable into the ducts, thus providing smooth installation. PLB HDPE duct consists of two concentric layers, the outer layer being HDPE; co-extruded with an inner uniform layer of solid silicone permanent lubricant, to reduce the internal co-efficient of friction.PLB Duct Pipes are used as underground cable conduits for optical fiber cables, communication cables etc. and are suitable for cable installation by blowing tor pulling by rope techniques.

In recent times, the communication sector calls for uninterrupted and reliable service for continuous transmission of data. Hence quality cable duct systems, that encase these vital links are the need of the hour. Kisan brings to you the best quality PLB cable ducts to ensure highest consumer experience.   ACCESSORIES End plug Cable sealing plug End cap Duct cutter Plastic coupler   Regular Inspection :The ducts are regularly inspected by BSNL QA staff to ensure quality of the ducts. The ducts are dispatched after approval from the certifying agency for the quality.  

• Feature: Crush resistant,Reliable,Long life
• Brand Name: Berlia
• Length of Pipe: 6 m
• Usage/Application: Drinking Water
• Duct Size: 50/42 mm
• Outer Diameter: 50 + 0.5 mm
• Ovalty: 1.4 mm
• Wall Thickness: 3.7 + 0.6 mm
• Minimum Order Quantity: 2000 Meter

With advances in technology in modern day Telecommunications, over a period of time, it became very important to upgrade the HDPE pipes to be used particularly for Telecom applications. The Optical Fibre Cables used for Telecommunications being very delicate and sensitive, it became necessary to modify the HDPE Pipes to be used as conduits for optical fibre cables. This led to the development of Permanently Lubricated (PLB) HDPE Telecom Ducts. 'Veer Visions' was one of the first very few manufacturers to acquire technology and equipment for establishing complete manufacturing facility for PLB-HDPE Telecom Ducts. At 'Veer Visions', PLB-HDPE Telecom Ducts are manufactured using ultra-violet (UV) stabilized grade of HDPE with required Anti Oxidant content and other recommended additives. The inner layer of ducts is duly silicon coated which minimizes the friction between OFC and the duct during the process of blowing the cable into the ducts, thus providing smooth installation of OFC in the duct without damaging the cable fibres.

• Material: HDPE
• Application: Agriculture
• Country of Origin: Made in India
• Brand Name: Kailash Poly Plast
• Size: 20 mm to 315 mm
• Usage/ Application: Agriculture
• Connection: Fusion joint