Sump Pump Dealers

• Capaicty: Up to 300 M3/hr
• Head: Up to 35 mtr
• Discharge Size: Dn 25 to 125 mm
• Temperature: Up to 50c
• Speed: Up to 2900 rpm

• Pump Size: 25 mm. to 350 mm
• Discharge: 2 to 1400 m3/hr.
• Permissible Solid: 5 to 150 mm.

The easier automatic operation of the pump is possible with the use of the float switch or automatic level control unit. The pump is available in oil, grease and water lubrication system.

•  :  
• Weight (Kg): 16
• Air Consumption (m3/min): 2.63
• Hose size (mm): 19
•  :  
• Fluid Inlet Hose Size: screen
• Fluid Outlet Hose Size: 2"NP

• sump pump: 15000

Vertical Centrifugal process pump can be used in any installation or specially where the saving of space is important factor and most important where liquid is difficult to lift because of nature like temp , corrosiveness etc These pump are designed for use where the liquid handled to be is of highly corrosive Nature or where non � adherence of product or zero metallic contamination is must These pumps are equally ideal for continuous or intermittent service for handling Corrosive as well as ultra pure chemicals without fear of corrosion or contamination High Temperature services : Maximum working temperature is 110 C / 200 C. Length : Pumps lengths available from 1� to 12� with flow rate up to 50m3/h or 120 meter head. Higher capacities and head available on request and even multistage pump can be also made . Models : Available in conventional or tailor-made configuration. Several models such as suction extension with float switch, duplex pumping station with float switch (auto on/off device) also available. Special Features

• Application: Ground Water Supply
• Color: All Color
• Condition: New
• Pressure: 0-10bar, 10-20bar, 20-30bar, 30-40bar
• Warranty: 5 Years
• HP Range: 0.5 HP to 2 HP

Buy a range of flawless Vertical Sump Pumps at cost-effective prices from us! We work at full throttle to serve the countrywide market with high-performance Vertical Sump Pumps. We are reputed to be among the notable Manufacturers and Suppliers of Vertical Sump Pumps in Haryana. We are quite particular about quality; that is why, we maintain strict quality guidelines and a team of quality controllers to ascertain each product’s efficiency and reliability.

vertical centrifugal process pump can be used in any installation or specially where the saving of space is important factor and most important where liquid is difficult to lift because of nature like temp , corrosiveness etc these pump are designed for use where the liquid handled to be is of highly corrosive nature or where non – adherence of product or zero metallic contamination is must these pumps are equally ideal for continuous or intermittent service for handling corrosive as well as ultra pure chemicals without fear of corrosion or contamination. high temperature services : maximum working temperature is 110 c / 200 c. length : pumps lengths available from 1’ to 12’ with flow rate up to 50m3/h or 120 meter head. Higher capacities and head available on request and even multistage pump can be also made . models : available in conventional or tailor-made configuration. Several models such as suction extension with float switch, duplex pumping station with float switch (auto on/off device) also available.   special features • bearing free design for handling abrasives in solutions. • motors are flange mounted single or three phase tefc from 1 hp to 100 hp . • epoxy / polyurethane paints are used on metallic bearing housing. • radial vanes on backside of impeller increase flow or fluids through the sleeve bearing preventing overflow at top of column. • lubrication of bearings by product itself or by fresh water. • all models operate at 1450 rpm / 2900 rpm (variable speed motor available ) • specially designed vapor seal provided to protect bearing from corrosive fumes • dynamically balanced impeller.   application fields these pumps are in extensive use in the fields of • pollution control. • filtration . • transferring corrosive chemicals . • slurries . • bio gas plants. • sewage. • waste water treatment plant. • phosphoric acid plant. h,po,h2sifs,h2so4,hf and . their mixtures. • gas washing plant . • scrubbed liquids containing , f,cl,so2,ammonia • water treatment plant . • any types of acidic water lifting . • m.s vertical pump are used for transfer of sulphuric acid 98 %. Olum,cloto,neptha   advantages of vertical submerged pump • no mechanical seal or stuffing box required • construction withstand corrosion & erosion • no foot valve required to lift from negative suction • no leakages problem just like gland or mechanical seal • normal maintenance • easy alignment    

System involve excavation of temporary pit & installation of sumps within the excavation, from which water entering into the excavation can be pumped.The number of location of sump pit should be determined & place on the erosion & sedimentations control plan.

We are one of the leading Manufacturers, Exporters, and Suppliers of PVDF Sump Pump. Our PVDF Sump Pumps possess heavy-duty design with thick walled volute casing and back plate. There is no requirement of shaft sealing in our PVDF Sump Pumps. The specialized bush bearing at the bottom end of the shaft minimizes the shaft deflection. All the hardware is of Polypropylene with metal insert. The available submerged Length of PVDF Sump Pump is 0.5 mts, l.0 mts, 1 .5 mts, 2.0 mts & 2.5 mts. Heavy Duty Engineered Polyproylene/PVDF Sump-Pump for primary Effluents/Corrosive Liquid and Scrubbing System : Heavy duty designThick walled volute casing & Back plateSemi-open Impeller with large metal insertShaft sealing not requiredSpecislized CFT bush bearing at bottom end of shaft to minimize to shaft deflectionAll hard ware are of polypropylene with metal insertAvailable submerged Length : 0.5 mts, 1.0 mts, 1.5 mts, 2.0 mts & 2.5 mtsMaximum head-30 mts, Maximum flow-30m3/hr *Technical Details Available on request Warantee Clause : We stand guarantee only the genuinety of PVDF Resign in our pumps but not stand gaurantee for any king of chemical, physical & toxicological effects on the same by the liquid handled with our pumps. Since the conditions of handling and useare beyond our control, we make no guarantee of results. We assume no liability for injuries, damages or penalties resulting from its use whether or not our recommendations are followed. Our recomendations are only on the basis of our past experienceand should be taken as guarantee. Part List for VSP Pumps No.DescriptionM.O.C.Qty.1Voute CasingPolypropylene1 No.2Back PlatePolypropylene1 No.3ImpellerPolypropylene1 No.4Cage RingPolypropylene2 Nos.5Back Plate BushCarbon Filled Teflon1 No.6Shaft SleeveHast-B/Ceramic1 No.7Shaft with HDPE SleeveEn8 / HDPE1 No.8Column PipeHDPE1 No.9Discharge PipeHDPE1 No.10Discharge FlangePolypropylene2 Nos.11Discharge ElbowPolypropylene1 No.12Elbow FlangePolypropylene1 No.13Pump Support PlateM.S. with PP Lining1 No.14Motor Support Stool - BottomC.I.1 No.15Motor Support Stool - TopC.I.1 No.16Bearing Cover - BottomC.I.1 No.17Bearing Cover - TopC.I.1 No.18Ball BearingSKF - 62071 No.19Ball BearingSKF - 73061 No.20Oil Seal (35x60x10)Neoprene3 Nos.21Oil Seal (25x40x10)Neoprene1 No.22Flexible CouplingC.I.1 Set23Lock NutSteel2 Nos.24Motor25Eye BoltsSteel2 Nos.26Back Plate FlangePolyproplylene1 No.27StrainerPolyproplylene1 No.28Hardwares for Clamping Cage RingSteel / PP8 Nos.29Hardwares for Clamping Casting & Elbow FlangeSteel / PP4 Nos.30Hardwares for Clamping Column Pipe & Back PlateSteel / PP6 Nos.31Hardwares for Clamping Column Pipe & Pump Support PlateSteel / PP6 Nos.32Hardwares for Clamping Discharge Pipe FlangeSteel / PP4 Nos.33Hardwares for Clamping Bearing CoverSteel8 Nos.34Hardwares for Clamping Motor & Motor StoolSteel12 Nos. Note : The pumps are available in five standard vertical length, 500mm, 1000mm, 1500mm, 2000mm, 2500mmAt he time of ordering spare parts please specify submerge depth size of the pump.The pump is designed up to 1.5 mts. submerge depth single column pipe and from 2 mts. to 2.5 mts. submerge depth the pump is designed with double coulmn pipe.The submersible depth is measured from the pump support plate.

• Item Code: V-S
• Immersion length: 400-2500mm at 1440 rpm, 400-1800mm at 2900 rpm
• Capacity range: Up to 150 m cubic/hour
• Head range: Up to 60 mt.

We offer a wide range of Vertical Sealless Sump Pumps that are designed in accordance with the well known two pipe principle. These are provided with shaft guide bearing bush to ensure a continuous pumping of abrasive & corrosive fluids. We offer these in varied dimensions as per the requirements of the clients. The vertical sealles sump pumps offered by us are used for pumping both chemical and industrial fluids in various sectors.  Some of the specifications of these vertical pumps are mentioned below:

• Brand Name: RMT
• Model Number: RMT 10 [CP 10]
• Place of Origin: India

Rmt 10 [cp 10] rmt 10 submersible pumps are ideal for removing water from trenches, ditches, manhole, industrial sumps and excavations. It has small cross section and can be lowered into areas having small access hatches. Used mainly in industries like construction, de-watering, marine etc. Technical details model # rmt 10 technically equivalent to cp 10 of chicago pneumatic weight 19.5 kg 43 lb overall height 445 mm 17 12” air consumption 22 ls 47 cfm minimum water depth 22 mm 910 ” water discharge 50

• Automation Grade: AUTOMATIC
• Voltage: 380 V
• Features: Heat resistant, Fine finish, Durable
• Power Source: Electric

• Pressure: 25 bar (365 psi)
• Color: Grey
• Flows to: 1400 m3/h (6160 US gpm)
• Heads to: 250 m (820 ft)
• Temperatures: -40°C (-40°F) to 350°C (660°F)
• Speed: 4700 rpm

API 610 ConfigurationThe Flowserve CPXV vertical sump pump is also available in an optional API 610 compliant model, specifically engineered for the hydrocarbon and petrochemical processing industries. Rectangular or circular soleplates are standard. A full ANSI 150/300 lb RF soleplate is optional.Standards ComplianceThe CPXV is CE marked and compliant with applicable European directives, such as ATEX.Modular Construction ensures installation flexibility with a standard column length of 0.5 m (1.6 ft), which equates to a minimum sump depth of 0.7 m (2.3 ft) Additional Column Lengths are provided up to a maximum of 10 m (32 ft) Heavy-Duty Thrust Bearings with axial adjustment made at soleplate level Recessed Impeller version is available for enhanced solids handling capability. Suction Strainer optional Fully Jacketed version is available for molten sulfur applications.

• Pressure: Medium Pressure
• Application: Liquid Delivery

• Flow: 500 m3/hr
• Head: 150 m
• Sp. Gr.: 1.9
• Temperature: Upto 350 deg. C
• Viscosity: Upto 20 cp
• DN sizes: 32 - 250 mm
• Installation Depth: upto 8 m

The vertical centrifugal sump pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water.Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.Versions: Seal-less pump Pump with dry mechanical seal (vapour seal) Pump with gland packing Pump with steam jacketing Material of Construction CASING  : CI, Ni-Resist, WCB, ARIC, DIN 4136, C 3C, CF 8, CF 8M, CF 3, CF 3M, CN 7M, CD 4MCuN, CE 3MN, others on request IMPELLER     : CI, Ni-Resist, WCB, ARIC, DIN 4136, C 3C, CF 8, CF 8M, CF 3, CF 3M, CN 7M, CD 4MCuN, CE 3MN, others on request SHAFT : SS 410, SS 316, UNS 32760, Alloy 20, Teflon lined, others on request Features SHAFT-- Different lengths of pump drive shafts are available to meet your working condition requests. LARGE PARTICLE IMPELLERS-- Large particle impellers are also available and enable passing unusually large solids. BEARING ASSEMBLY--Maintenance friendly Bearing Assembly has heavy duty roller bearings, robust bearing housings, and a massive shaft. CASING--The metal pumps have a heavy walled abrasive resistant chrome alloy.  The rubber pumps have a molded rubber casing. COLUMN AND DISCHARGE PIPE-- The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered. UPPER STRAINERS-- Snap in polyurethane strainers fit in column openings on the smaller sizes and steel strainers on the larger sizes. LOWER STRAINER-- Bolt on steel strainers on the metal pump and molded snap on polyurethane strainers on the rubber pumps Applications: Acids, alkalis, dyes, paints, petrochemicals, intermediates, seawater, molten sulfur, crystallizing liquids, hydrocarbons, hot water, clear effluents ​Industries: Fertilizer, Petrochemicals, Refineries, Textile, Water treatment, Wastewater treatment, Steel, Power Generation, Pharmaceutical, Acid, Caustic Soda, Soda Ash, Adhesives, Paper & Pulp, Distillery, Sugar, Seawater Desalination

In order to ensure the safety of the products, we carefully store the lot under hygienic conditions and safe environment. Moreover, the lot is stringently and regularly checked by the experts. To avoid any type of mechanical and biochemical harms, we pack our products in high-grade packing items that are sturdy as well. Moreover, we provide product details on it as well.   Features : Long functional life Non-interrupted performance Low operational cost Hydraulic efficiency Long Term Dependability Range sewage and Drainage Pumps Drainage Pit Pump Full Stainless Steel Sewage And Grinder Pumps Cast Iron Sewage and Sludge And Grinder Pumps

The pump are applied to open well or sump, agriculture, sprinklers, drip Irrigation etc.

Vertical wet pit volute pump with Dry motor Stage: Single Closed impeller Oil lubricated bearing arrangement antifriction bearing Mechanical seal/ gland packing Application Emergency oil pump Dewatering Special features / product benefits Technical data Qmax: 750 m3/hr Hmax: 220 m Temperature: up to 80°C Delivery Size: DN 32 – DN 200