Auditing Services

• Country of Origin: India
• ISO 17025 Accredited Testing Laboratory: ISO 17020 Accredited Inspection Agency

CIL provides workplace safety audit services in Ghaziabad, Uttar Pradesh, India. CIL is an ISO 17020 accredited inspection agency.  Workplace health and safety (WHS) audits are often dreaded, striking fear into managers and employees alike. But remember, audits aren’t trying to catch us out or expose our failings, their purpose is, ultimately,  to help protect our workers. The health and safety requirements of every business change over time (as do best practices), and audits allow workplace compliance to be checked, and, if necessary, brought back in line. By ensuring WHS compliance, we can make sure the right procedures and processes are in place to protect the health and safety of our employees and contractors.    There are three principal types of audits that businesses can undertake:  Compliance audit - ensuring that the workplace is free from recognized hazards and complies with WHS standards.  Program audit - to verify that the necessary programs are in place to dictate safety rules and regulations and reduce the number of safety incidents.  Management systems audit - to evaluate the effectiveness of management’s commitment to safety programs and their integration into safety culture.    What Does a WHS Audit Involve?  WHS audits involve three essential techniques: reviewing documentation, interviewing employees and observing the workplace. Audits can be internal or external, either conducted by a member of staff or independent consultants. To perform an internal audit, a member of staff needs to have the right training and qualifications, but it does give the company greater control over the process and the cost. An external audit, on the other hand, is the gold standard that allows organizations to benchmark themselves against others.  Some businesses will be subject to external WHS audits to comply with regulations. Criteria can seem pretty strict, but as long as businesses practice effective record keeping, they’ll have the documentation in place to provide the evidence needed.    How Often Are WHS Audits Needed? There isn’t a standard frequency for WHS audits; it comes down to each business, the level of risk of its activities and the relevant compliance regulations. As a minimum, every business should carry out annual audits of its WHS programs and systems to ensure safety is maintained. However, in some industries and for some activities, audits are required daily or even hourly. In this case, when there is a high level of risk, checklists are used to ensure work meets company and compliance standards.  Does Every Business Need WHS Audits?  The short answer is, yes. If you want to ensure your employees return safely to their families at the end of each workday, then you owe it to them to carry out audits.  Safety and well-being are one of the biggest issues facing employers today. WHS audits help to rate a business’s health and safety program, identify its strengths and weaknesses and show where improvements can be made. It is an ongoing and continual process that aims to keep everyone safe.  Audits should be integrated into every company’s business practices, something that both the business and its employees are aware of and prepared for. If an incident were to take place, audits prove that the systems and processes were in place to try to avoid it.  There really is no excuse not to undertake WHS audits; if you are a responsible employer who cares about the well-being of your employees, you owe it to them. 

Our Statutory Audit Service ensures your financial statements are compliant with legal requirements and accounting standards. We conduct thorough audits for businesses of all sizes, providing an independent assessment of your company’s financial health. Our expert team reviews your accounting records, internal controls, and financial statements to ensure accuracy and transparency. We help identify discrepancies, mitigate risks, and improve financial reporting processes. With a statutory audit, you can enhance your credibility, build trust with stakeholders, and ensure compliance with regulatory authorities. Let us take care of your audit needs so you can focus on growing your business. Contact us today

Energy Audit & Consultation Energy audit and consultation services are crucial for individuals, businesses, and institutions seeking to optimize energy usage, reduce costs, and enhance overall sustainability. These services are typically offered by specialized companies and experts in the field. Our team of seasoned experts employs cutting-edge technologies and multiple software tools, such as EnergyPlus, Modelica, and many other Energy Simulation softwares, to conduct precise energy simulations. Through these simulations, we gain invaluable insights into your energy consumption patterns, enabling us to craft customized and forward-thinking solutions that are both sustainable and cost-effective. Benefits of Energy Audit and Consultation Services: Cost Savings: Identifying inefficiencies leads to targeted improvements, resulting in reduced energy consumption and operational costs. Environmental Impact: Optimizing energy use contributes to sustainability goals by lowering carbon footprint and greenhouse gas emissions. Enhanced Equipment Performance: Identifying and addressing issues with equipment and systems to ensure they operate at peak efficiency. Regulatory Compliance: Meeting energy efficiency standards and environmental regulations.   Why Approach a Professional Company:   Expertise: Energy audit companies have specialized knowledge and experience in assessing energy consumption patterns across various sectors. Certifications: Reputable companies often have certified energy auditors who hold recognized qualifications, such as Certified Energy Manager (CEM), ensuring high standards of service. Customized Solutions: Professionals tailor recommendations based on specific facility needs, offering customized strategies for energy optimization. Advanced Tools and Technology: Energy audit companies utilize sophisticated tools and technologies for data collection and analysis, providing accurate insights into energy usage. Comprehensive Services: Beyond audits, many companies offer consultation services, assisting in the implementation of energy-efficient technologies and ongoing monitoring to ensure sustained improvements. Regulatory Awareness: Keeping abreast of changing energy regulations, professionals help clients stay compliant with relevant standards and requirements. Return on Investment (ROI): Expertise in calculating and demonstrating the potential return on investment for energy-efficient upgrades and implementations.   Why us? Advanced Energy Simulations: Utilizing sophisticated software tools, we conduct in-depth energy simulations to analyze your current energy consumption, identify inefficiencies, and propose targeted improvements. Customized Solutions: Our consultations result in personalized strategies tailored to your business's unique needs, ensuring sustainability and cost-effectiveness in every aspect of your energy management.   Innovative Technologies: We stay at the forefront of technological advancements, recommending and integrating innovative solutions that optimize energy efficiency and reduce environmental impact.    Approaching a professional energy audit and consultation company ensures access to specialized expertise, personalized solutions, and a strategic approach to achieving energy efficiency and sustainability goals. The investment in such services can result in significant long-term cost savings and environmental benefits, making it a valuable decision for individuals, businesses, and institutions.  

• Type: GST
• Location: Bihar
• Mode Of Service: Online
• Payment Mode: Online
• Type of Service: GST

Our Harmonics Audit Services offer a thorough analysis of your electrical systems to identify and mitigate harmonics-related issues. Our specialized team assesses equipment, measures harmonic levels, and recommends tailored solutions. By addressing harmonic distortions, we enhance power quality, improve equipment lifespan, and prevent disruptions. With our services, you can ensure a more stable and efficient electrical environment, minimizing downtime and maximizing productivity.

Specialised Company Income Tax Audit Services To offer reliable company income tax audit services, we at Raj Taxation Consultancy Services, maintain a dedicated and a personalised approach blended with detailed advice. We are credited as the prominent company involved in company income tax audit and our company is constantly striving to become the most trusted name in the world of consultancy service that offers unparalleled service to all our clients. Excellent Services We work predominantly with companies both in the charitable and voluntary domains as partners to assist them in achieving their desired results. Our team is committed to making way for a sustainable and long-term relationship that is based on our experience and skill to help our clients obtain real success.

Are you facing compliance or risk challenge? Do you seek compliance expert that understands your industry? or you just want consultancy to gain peace of mind that your business is meeting its compliance obligations? Well, we can help you in all such concerns. Ours is a Delhi, India based service provider agency, specialized in providing compliance audit and consulting services to SMEs and large enterprises. Our consultants work alongside, perform assessment of your business and provide analysis report detailing key finding and recommendations- essential information to improve and move forward. So, contact us anytime.

Boiler House Efficiency Improvement : Establish the present steam generation from the boiler and the steam loading pattern of the plant i.e. peak, average and minimum loads based on the metering and system at plant Evaluate the efficacy of the present operating practices and recommend any changes to ensure optimum boiler efficiency. Study the present blow down philosophy and suggest methods to optimize blow down and heat recovery from blow down. Study the present feed water management philosophy and same will be evaluated to ensure optimum feed water temperature to the boiler. Evaluate use for LP flash steam in the plant or take it back to feed water tank of boiler  Evaluate the efficacy / feasibility of using heat from available waste heat streams in the process towards heating the feed water   Quantify the potential for steam reduction in the plant : Evaluate the steam distribution network in the plant: Line sizing and routing Distribution with respect to pressure drop if any Type, quality & health of insulation. Condensate removal from steam mains. Establish % distribution loss on account of leakages and radiation and suggest methods to reduce the same Evaluate the desired vs actual parameters for steam as required by the process equipment Evaluate the plant historic data and observe the current operations for anomalies such as batch time / throughput variations and evaluate the impact of the current steam and condensate network on such variations  Evaluate the current steam supply parameters vis-à-vis the process recipe requirements including gradients etc. and evaluate gaps within the same Evaluate the plant for any throughput bottlenecks due to the steam system Evaluation of hot water generation and utilization in the process.   Key Takeaway Points : Avoiding clinker formation inside the boiler Increase the inlet air temperature to increase boiler efficiency Avoid High Negative Draft in Solid Fuel Fired Boilers Generate Steam at Higher Pressure Dissolved oxygen should be removed from the feedwater tank Injection of flash steam and condensate into the feedwater tank should be via a deaerator head Air to fuel ratio should be monitored and controlled to minimize unburnts Efforts should be made to minimize addition of surface moisture content in fuel. To deliver the same amount of energy, the flowrate of hot water will have to be 45 times than that of steam. Monitor flue gas temperatures to control stack loss. Using steam instead of thermic fluids for indirect heating is more efficient. Monitoring flue gas temperature gives a good indication of the boiler operating conditions Operating boiler closer to full load improves efficiency Higher feedwater temperature increases the boiler output Use saturated steam for indirect heat transfer applications. Every 6 DEG. C rise in feedwater temperature reduces the fuel bill by 1%.

• SEDEX: Amfori BSCI
• GRS: GOTS
• C-TPAT: ICS
• WCA: HIGGS
• FEM: SLCP

Sedex BSCI C-TAT GOTS GRS ICS WRAP FEM SLCP HIGGS Consultany services all over India. We are located in Mumbai, Maharashtra. More than 200 customers already complied

Our company has earned accolades in offering Auditing Services to the clients. Our well-experienced charted accountants enable us to render these services that cover all direct and indirect taxation, auditing and book keeping, corporate law, MIS reporting and many others. We have team of professionals to conduct such audits. These services for in depth checking of day-to-day transactions, large business

Corrosion Assessment by BENZ Packaging: Prolonging Asset Lifespan with Holistic Solutions Corrosion remains a persistent global issue, affecting various industries and infrastructure, and the substantial annual cost underscores the need for effective control measures. Managing corrosion proactively is crucial for safeguarding valuable assets. BENZ Packaging serves as an Integrated Service Contractor for Total Corrosion Management, providing a range of services to address this pervasive challenge. Primary Services:Comprehensive Corrosion Inspection: Our seasoned corrosion experts conduct a thorough examination of your assets, meticulously assessing corrosion risks. This detailed evaluation serves as the basis for crafting a personalized solution aimed at extending the life of your assets. Pre-Inspection: Prior to the comprehensive inspection, we perform a pre-inspection to gather essential information about your assets and operating environment. This initial assessment allows us to generate a detailed pre-inspection report, offering insights into potential corrosion risks and areas requiring attention. Prioritization & Budgeting: Recognizing the finite nature of resources and the need for strategic planning in corrosion management, we prioritize project milestones and meticulously prepare budgets tailored to your specific requirements. This ensures optimal impact from your corrosion mitigation efforts. Manpower Management: Our commitment to holistic solutions extends to managing manpower. We deploy, train, and replace an integrated team of highly skilled painters and specialists, ensuring meticulous care and attention for your assets.   Asset Management: Effectively safeguarding assets from corrosion demands a comprehensive approach encompassing preventive and corrective measures. We invest in equipment and training to ensure that your assets receive proper maintenance, shielding them from corrosion's relentless impact. Inventory Management & Reporting: To enhance efficiency and reduce inventory, we standardize your corrosion management program. This standardization fosters effectiveness, ensuring that your assets remain corrosion-free and operational for an extended period.   Controlling Corrosion through Education, Design, and Packaging Materials: We advocate a holistic strategy, including education on corrosion prevention strategies. Promoting corrosion-resistant design principles to mitigate risks effectively. Utilizing advanced packaging materials specifically designed to combat corrosion during storage and transportation. BENZ Packaging's Corrosion Assessment goes beyond inspection; it signifies a commitment to safeguarding your assets, ensuring longevity, and optimizing operational efficiency through comprehensive corrosion management.

• Location: All India
• Service Mode: Offline
• Payment Mode: Offline/Online
• Industry: Commercial

Analyzing the opportunities as well as risks of performing outbound operations is imperative for any business and forensic audit and investigation is one of the first steps of it. The forensic audit & investigation services that we are offering from our office in Delhi, India, have assisted many companies across the globe in performing risk-free operations. Our team of forensic accountants, auditing experts, and investigators enable us to assist the companies in any type of fraud-related incidences or investigation. Our team works swiftly in such situations to ensure speedy investigation and audit.

Auditors and accountants are responsible for deterring and detecting fraud by evaluating accounting systems for designing, weaknesses and monitoring internal controls, determining the degree of organizational fraud risk, interpreting financial data for unusual trends and following up on fraud indicators. 21MS Financial Service, Maharashtra provides you with the best auditing services. Our services help companies ensure their accounting records are an accurate representation of the transactions that they have made. We have professionals who assist companies with constructing compliant financial statements and communicating with investors or shareholders, banks and other financial partners that their finances are in order. Therefore choose us and get our service for your company. For more details call us and speak to our executives.

Our Road Safety Audit Service ensures thorough assessment and improvement of road safety measures. We conduct detailed evaluations of road designs, traffic flow, signage, and pedestrian safety to identify potential hazards and risks. Our expert team provides actionable recommendations to enhance road safety, reduce accidents, and comply with regulatory standards. Whether for new road construction or existing infrastructure, we prioritize safety and efficiency in every audit. Partner with us to create safer roads and protect both drivers and pedestrians with comprehensive road safety solutions.

We are a Chartered Accountants registered firm, under Rules 190 of Chartered Accountant Act, 1949 since 2002. We are based at Kolkata. H Saraogi & Associates caters to the needs of its customers to ensure that its customers keep pace with the rapid changing times. Based at Kolkata (West Bengal, India), we stand among dependable Auditing Services providers. We consider that providing Professional Auditing Services are top priority and that the firm does not view such services as a commodity. We do this by emphasizing the importance of audit quality in training programs and annual performance reviews.   Types of Auditing Services made by us : Statutory AuditsWe perform Statutory Audits of Public/Private Limited Companies in the Manufacturing/ Trading/ Assistance Areas, IT Companies, Nationalized Lenders, Economical Organizations, Non-Banking Finance Companies, Community Industry Venture (PSU), Non-profit Organizations, NGO, Resorts, Medical centers, Supportive Organizations and other little and medium-sized companies. Tax AuditsEvery company, Firm or Businesses whose income surpasses Rs.100 Lakhs or total claims from any occupation surpasses Rs.25 Lakhs in any previous year, is necessary to get its records precisely & punctually audited and obtain a review under the area 44AB of the Earnings Tax Act. We have a group of calm tax experts to perform such type of audits. Internal & Management AuditThe improving problem is to make sure awesome inner & handling management techniques to avoid unique or structured faults and omissions. Apart from, Protecting of valuable resources, sufficient department of power over key management places and strict conformity with the inner operating policies and corporate governance.

We are a trusted name, when it comes to reliable Internal Support Services for Auditing. Backed by a team of expert professionals, we offer perfect solution for assessing, designing, developing and implementing cost effective auditing process for corporate and business houses. We are preferred by clients because of the effective internal controls that guarantee smooth and efficient working of the organization. As part of our Auditing Services, we offer : Stock Verification Cost Control Audits System Designing Management Audit Due Diligenge Investigations Surprise Checks Why Us? Support Services for Auditing Auditing under various enactments as Income Tax, GST, and Company Tax etc. Online Library of forms, statements and declarations formats Compliances with Indian accounting and auditing standards and IFRS Auditing tutorials guidelines standards and information library

• Type Of Energy: Electrical
• Type Of Service Provider: Safety Audit Service
• Usage/Application: Industrial
• Service Location: Local Area
• Service Mode: Offline
• Features: Timely Rendered

Before starting any project we discuss with the Client the issues that are of main concern. At the end the Client receives a due diligence report containing all findings. Our approach is to save time, money and effort as well as to help in influencing the price at the outset of the deal. We assist clients in conducting financial, legal and accounting reviews in case of mergers, acquisitions and investments. A sound understanding of local laws, regulations and accounting practices enables us to vet all critical issues in detail.

In Transfer Pricing Audit (TPA) we examine the pricing of transactions between related two or more associates. By applying and documenting various test methods, it is determined whether the transactions are conducted under market conditions and survive the scrutiny of the IRS and other tax authorities. Section 92E of Income Tax Act, 1961 is applicable on the TPA. The TPA is applicable on every person who has entered into an international transaction and aggregate value of such transactions exceeds Rs. 1 crore and specified domestic transactions exceed INR 20 crore in a financial year. In case the aggregate value of such transactions does not exceed its prescribed limited then it is not mandatory to maintain the aforesaid information and documents