Jacketed Hoses Dealers

• APPLICATION: For Blending, Heating & Cooling
• CONSTRUCTION: Vertical, Cylindrical, Top & Bottom Dished End Jacketed, Insulation, Agitation, Leg Supports
• CAPACITY: From 100 Liters To 10000 Liters
• MOC: Contact Parts S.S.316, S,S,3161 Jacket, M.S., S,S, 304
• FINISH: 220 Grit lnside & 150 Grit Outside
• DESIGN: Internal, Atm, External: 3 Bar @ 150°
• AGITATOR: Propeller, 6 Bladed Turbine, Off Center With Single Baffle Or Nil
• RPM & SEAL: 500, 750, 1440, Stuffing Box Or Mech. Seal with Cooling Pot
• SPEClAL FEATURE: Low Power Consumption No Coupling Inside Or Outside Top Cover welded Or Bolted with
• ACCESSORIES: Spray Ball Thermowell with Dial Gauge Safety valve Pressure Gauge On Steam Inlet Connection Level Indicator

Hydroflex Pipe Pvt Ltd. is manufacturing jacketed flexible hose assemblies. The Inner annular corrugated stainless steel flexible metallic hose conveys the fluid and jackets annular corrugated stainless steel flexible metallic hose for heating or coolant fluid or protective the hose and both Inner and jacketed hoses are highly flexible.We are using our annular corrugated stainless steel flexible metallic hoses ANSI 321 / 316L with ANSI 304 single wire braiding. We will provide both the end flange fittings swivel or fixed type and for inlet & outlet heating or cooling fluid end connection we will provide flange end or threaded end at an offset angle of 180°, Hoses conform to BS 6501, Part-1:2004 / ISO 10380:2012.Application: Fertilizer Industries, Refineries Industries, Petrochemicals Industries, Chemical and Pharmaceuticals Industries

• Core & Jacket: : SS 304 /321 / 304L /316 /316L
• Braid of Core & Jacket: : SS 304 / 304L / 316 /316L.
• Operating Temperature: : 400ºC max.600ºC is possible as a special design.

For the Internal hose and the Jacketed hose our stainless steel corrugated hoses used, In each case with stainless steel Braiding. The internal and the Jacketed hose are joined with pressure tight fit.   Application : When ordinary insulation is not sufficient for certain applications, or when specific minimum temperatures are needed to convey viscous substances, traced piping is generally used; this consists of two tubes, one inside the other, with various differences in cross-section. One of the tubes, generally the inner one, carries the medium, and the other one carries a heating or cooling agent ; sometimes it is the other way around .In other cases, the external tube is used as a safety measure. Occasionally, such traced piping has to be flexible. It is for such applications that we supply our Jacketed hose. It's high flexibility makes this hose very suitable for angular and lateral (offset) movements. The Jacketed hose is pressure-and vaccum-proof and, due to the materials used in its manufacture, resistant to temperature and corrosion. The large surface area of the corrugated section results in particularly high heat transfer efficiency, the hose combining the functions of a flexible conduit and a highly efficient heat exchanger in the simplest possible form.    

• Hose Material: Core & Jacket: S.S 304, 316, 321
• Braiding: S.S 304
• Operating Temperature: 400°C max.
• End Connection: Core Hose: Male/Female/Flange fittings
• Jacket Hose: Female union / Flange. Offset by 180° to one another
• Consumers: Mainly for used in chemical, pharmaceutical, petroleum and engineering industries

For heat treatment to any fluid (in internal hose) with steam or hot oil (in the jacketed hose) these assemblies are used. This raises the temperature of the fluid in the inner hose, thereby lowering its viscosity and permitting free flow of the liquid. The high flexibility of the hose is apt for angular and offset movements. These can also be used as coolant hose in compressor and engines. The large surface area of the corrugated hose results in a higher heat transfer efficiency

• Material: Stainless steel
• Size (Inches): 1/4
• Working Pressure: Vacuum Upto 200kg/cm2
• Temperature Range (Degree Celsius): 269C to 800C
• Single Hose Length: 1m-6m

Construction: Twill woven 100% polyester filament yarn jacketed fire hose with seamless EPDM rubber lining. Performance & salient feature: > Very high kink resistance > Widely approved and standardized by Fire Brigades. > Light Weight and flexible fire hose – ideal for hose cabinets > Suitable for use in Power Plants, Steel Plants, Railways, Mines and other industries. > Fungus, Heat & Ozone resistant. > Very compact an ideal for hose cabinet/rack Approval : > ISI marked under IS:14933 Type A > DG-Shipping (MMD approved) for   use on Merchant navy Vessels > TAC approved >Manufactured under    ISO:9001:2008 quality systems > Lloyd’s approved to BS:6391    Type 1 > UL Listed under UL-19 by    Underwriters Laboratory U.S.A. Application: > For multistoried buildings > Power Plants > Steel Plants > Railways > Mines and other industries.   Standard Length : 7.5mtrs, 15mtrs, 18.3mtrs, 22.5mtrs and other length upto 30 mtrs

• Core & Jacket: SS 304 /321 / 304L /316 /316L
• Braid of Core & Jacket: SS 304 / 304L / 316 /316L.
• Operating Temperature: 400ºC max.600ºC is possible as a special design.

APPLICATION :   When ordinary insulation is not sufficient for certain applications, or when specific minimum temperatures are needed to convey viscous substances, traced piping is generally used; this consists of two tubes, one inside the other, with various differences in cross-section. One of the tubes, generally the inner one, carries the medium, and the other one carries a heating or cooling agent ; sometimes it is the other way around .In other cases, the external tube is used as a safety measure. Occasionally, such traced piping has to be flexible. It is for such applications that we supply our Jacketed hose. It's high flexibility makes this hose very suitable for angular and lateral (offset) movements. The Jacketed hose is pressure-and vaccum-proof and, due to the materials used in its manufacture, resistant to temperature and corrosion. The large surface area of the corrugated section results in particularly high heat transfer efficiency, the hose combining the functions of a flexible conduit and a highly efficient heat exchanger in the simplest possible form.   For the Internal hose and the Jacketed hose our stainless steel corrugated hoses used, In each case with stainless steel Braiding. The internal and the Jacketed hose are joined with pressure tight fit.

Jacketed Hoses, mechanical track jack, Fuel Dispensing Hose, hot water hose

S S Jacketed Hose, Corrugated Metallic Hoses, Teflon Smooth Hose

Jacketed Hoses, charging hose, Interlock Hoses, PVC Duct Hoses

SS jacketed Hose pipes, titanium bolt, Metal Clamps, Sheet Metal Fittings

Jacketed Hose, standpipe

Jacketed Hose

Jacketed Hose Heat - And Coolant - Traced Hoses, standpipe

Jacketed Hoses, Gents Jackets