EK Engineering Old ginani, Bikaner, Rajasthan

-hd52 comes with standard configuration with wind direction, wind speed and compass and offer two analogical output, both for wind speed and for direction, factory configurable among 4-20ma (standard) or voltage (optional). Optionally available, (accredia) ilac-mra traceable factory calibration. Key features: 1.ultrasonic detection technology 2.multi-parameter monitoring 3.no effects of humidity, moisture, temperature, radiation, vibrations etc 5.bms, plc integration key specifications: 1.measuring parameters: wind direction, speed and compass (standard), optional: relative humidity, temperature, barometric pressure, solar radiation 2.measuring range: -wind direction: ultrasonic sensor, 0 ~ 360°, 0.1° resolution -wind speed: ultrasonic sensor, 0 ~ 60 ms, 0.01 ms resolution -compass: magnetic, 0 ~ 360°, 0.1° resolution -air temperature: pt100, -40°c to +60°c, 0.1° c resolution -relative humidity: capacitive sensor, 0~100 % rh, 0.1% rh resolution -barometric pressure: piezoresistive sensor, 600~1100 hpa, 0.1 hpa resolution -solar radiation: thermopile, 0~2000 wm2, 1 wm2 resolution 8.output: 2 x linear, proportional analog (4-20ma) standard 9.communication protocol: nmea, modbus rtu serial interface rs485, rs232 10. Ip66 ingress protection applications areas: 1.environment monitoring 2.weather stations – tunnel, industries, chemical plants, petrochemicals 3.agriculture 4.marine and harbour application 5.airports, defense facilities 6.hvac, construction

Fischer MS10 is rugged, industrial performance grade pressure switch with onboard dial indicator. It is suitable for monitoring overpressure and vacuum pressure of liquids and gaseous media. MS10 combines high sensitivity, vibration resistant, corrosion-resistant metal diaphragm with 2 x change over micro-switch. This enable to employ the pressure instrument in variety of industrial and commercial applications.   Working Principle: The measuring system of MS10 consists of two encapsulated and hydraulically coupled metal diaphragm. When the instrument is subjected to pressure, it causes a deflection proportional to the strength of pressure. Opposite side of the medium-touching diaphragm, a tappet returns the deflection to a motion work and the operating elements of the micro-switches. When excessive pressure is applied, each metal diaphragm touch and limit itself to chassis of the capsule. This protect the transmitter from overpressure.   Key Features: 2 x change-over microswitches High repeatability of micro-switches Vibration resistant Long service life Rugged diaphragm system Overpressure protected Key Specifications: Measuring range: -200 ~ +200 mbar to -1 ~ +24 bar Nominal pressure: 25 bar Max. pressure: overpressure proof to nominal pressure (all measuring ranges), vacuum proof up to fine vacuum 10-2 mbar Leakage rate: ≤ 10-5 Pa.m3/s Permissible ambient temperature: -10° C ~ +70° C Permissible media temperature:  + 70° C Protection class: IP54 per DIN EN 60529 Accuracy: ± 2.5% full scale Output contacts: 1 or 2 micro-switches, 1-pole changing contacts, adjustable Switching hysteresis: approx. 2.5% full scale Electrical connection: cable terminal box Pressure connection: KF10 small flange pipe connection DIN 28403 and ISO 2861 Measuring system: metal diaphragm measuring system, welded Pressure chamber: stainless steel 1.4404 Measuring diaphragm: 1.4571, DURATHERM Materials, wetted inner parts: stainless steel 1.4404, 1.4571   Industrial areas: Process engineering Environment engineering Renewable energy eg. biogas etc Waste Water Engineering Effluent treatment Breweries, alcohol industry

Models SWD, USF and CSW fans are designed and built in one of two manufacturing locations, Schofield, WI and Shelby, NC. Multiple manufacturing locations enables us to build fans and get them to you, our customer faster.Greenheck’s centrifugal products are specified to handle a variety of commercial and industrial projects.• General supply, return or exhaust systems• Emergency smoke exhaust (buildings, car parks, etc.)• Restaurant grease exhaust• Stairwell pressurization• Process heat exhaust   Greenheck’s airfoil and backward-inclined centrifugal fans are designed to provide efficient and reliable operation for commercial and industrial applications. Our products are manufactured with state-of-the-art laser, forming, spinning and welding equipment, and endure our quality control testing to ensure trouble-free start-up. Greenheck centrifugal models include industry-leading design features to ensure your ventilation equipment has the latest technologies available. Available with Greenheck Centrifugal Products:• AMCA licensed performance.• Permalock TM or all welded scroll design.• Set screw or concentric mount bearings with the industry’s highest cataloged bearing life.• Corrosion-resistant, electrostatically applied and baked powder coatings.• Both belt and direct drive configurations.• Galvanized, coated steel, aluminum or stainless construction materials.• UL/cUL approvals for electrical, kitchen grease and high temperature operation.

Key features: 1. Airfoil blades with various material options 2.robust, performance oriented 3.nfpa, ul555 compliant 4.various actuators options available key features: 1.maximum pressure: 12 ~ 24 in wc 2.velocity: 20.3 ms 3.leakage: 8 cfmsq. Ft. @ 4 in. Wc 4.blade deflection: l180 (standard) 5.blade profile: fabricated airfoil extruded airfoil fire rated airfoil 6.blade material: galvanized steel aluminum ss 304 ss 316 7.certifications: nfpa 130, 502; ul 555s; bs476 typical ventilation applications area include: 1.subway ventilation system 2.tunnel ventilation control system 3.underground ventilation system

emperature monitor with limit switch contacts, high switching capacity, stainless steel media contact material, UL, VDE approvedMake: Fischer Messtechnik (Germany)Model: TS61 Fischer TS61 temperature switches are used for monitoring and controlling out-of-limit temperature conditions in heating and cooling systems, pipes, process vessels, process engineering and storage vessels. TS61 is ideally suitable for monitoring, control and protection of compressors, motors, pumps, hydraulic power systems, plastic processing machines, chillers etc.   Operation Principle: Fischer TS61 is housed in stainless steel casing and is highly vibration proof. When the process temperature exceeds the set-point value, the switch contacts open to break the electrical load circuit. The switch contact close automatically when the temperature drops below set-point value. Key Features: Failsafe, high current switching capacity (resistive and inductive loads) Fast response time Easy installation Instantaneous snap action switching Self-resetting Set point range: 70°C ~ 180°C in 5K steps Switch point accuracy: ±5K Vibration resistant per Germanischer Lloyd (GL) specifications, characteristics curve 2 Key Specifications: Temperature set-point range: 70°C ~ +180°C  in 5K steps Set-point tolerance: ±5K Material, media contact: Stainless steel 1.4571 Process connection: threaded stem G 1/2 (M) Switching action: normally closed contacts, open above set-point, self-reset Re-set temperature: 40 ± 15K below set-point temperature (other values on special order) Max. media temperature: 80°C Contact rating: 250V AC, 2.5A (resistive load), 1.6 A(inductive load) Switch life expectancy: 10, 000 operations at maximum load Switch action: instantaneous, snap action switching. response time varies slightly with load current and operating temperature Maximum load current: 6.3 A Electrical connection: DIN EN 175301-803 plug-connector Protection class: IP54 per DIN EN 60529 Temperature sensing element: UL And VDE approved bimetal thermostat element Application / Industry: Food processing HVAC & R Chemical process industries Petrochemicals Marine, shipping, ship building Water, effluent treatment system

Wind speed and direction sensor transmitter WS Series, is available in two version – wind speed, and wind speed + direction sensor. It is wind tunnel tested instrument, based windvane with magnetically operated reed switches. It offers linear analog output as well as optionally with LonWorks FTT, for integration with BMS or SCADA system   Key Features: Mercury wetted reed switches for bounce-free pulse output for speed 0~1 kohm output for wind direction Low inertia cup assembly for fast response Magnetically operated Dynamically balance wind vane with triple ballrace shaft Wind tunnel tested LonWorks version in FTT Key Specifications: Measuring range: Speed: 0 ~ 90 m/s, Magnetically operated, mercury wetted reed switch Wind direction: 0~360°, resistive sensor Sensor technology: non-dispersive infra-red sensor cell, Gold plated, dual beam Output: analog output, FTT IP65 ingress protection EN-50081-1 Emission, EN-50082-2 immunity approved Applications areas: Weather stations – tunnel, industries, manufacturing units, survey / monitoring facility Environment monitoring facilities Agriculture Sports facility Marine and harbor applications Airports, space facility

Working Principle: Fischer ME01 pressure sensor consists of ceramic measuring cell. The high durability of the ceramic material allows the pressure transmitter to be employed with aggressive media. A Wheatstone’s bridge is attached to diaphragm’s opposite side to the measured media. As the measured pressure is applied, it causes the diaphragm to be strained. The resistance values of the Wheatstone bridge change according to applied pressure. These values are displayed and transmitted as electrical analog output signal.   Key Features: Direct measurement, without transfer fluid High vibration resistance High accuracy High overpressure safety Minimum hysteresis Key Specifications: Measuring range: 0 ~ 1.6 bar to 0 ~ 60 bar (overpressure safety: 3.2 bar ~ 120 bar) -1.0 ~ 0.0 bar to -1.0 ~ 15 bar (overpressure safety: 2 bar ~ 32 bar) Linearity: < 1% full scale Hysteresis: < 0.5% full scale Permissible ambient temperature: 0° C ~ 60° C Permissible media temperature: 0° C ~ 100° C Nominal power supply: 24V DC Output Signal: 0~20mA / 4~20mA / 0~10V, 3-wire Ingress protection: IP65 acc. to DIN EN 60529 Temperature drift, zero: 0.4% full scale / 10K Temperature drift, range: 0.05% full scale / 10K Electrical connection: connection plug M16 x 1.5 acc. to DIN EN 175301-803 Material, medium contact: AISI 316L (1.4404), gasket: Viton Material, body: AISI 304 (1.4305)   Industrial areas: Chemical industries Machine and plant engineering Process engineering Manufacturing industries Glass and silicon industries  

Working Principle: Fischer MA11 is suitable for measurement of liquid, fluid or gas pressure. Measured pressure is channeled into the manometer through connecting shank. The applied pressure causes the measuring element to deform elastically. This movement, transformed by the motion train, deflects the needle proportionately to the applied pressure. Together with motion train, needle and dial, the measuring element and the connecting shank comprise physical unit of MA11. This makes the measuring system independent of forces acting on the housing. Internal arrester supports limit of needle deflection to 270°.   Key Features: Robust mechanical construction Optional: equipped with limit signal transmitters or angular position measuring transducers meeting safety standards Key Specifications: Measuring range: 0 ~ 0.6 bar to 0 ~ 600 bar Construction: compliance to DIN EN 837-1 Max. pressure load: 1.3 x upper range value Display accuracy: Class 1.0 Temperature error: ± 0.3 %  / 10° C Permissible ambient temperature: -25° C to +60° C Permissible media temperature: max. 60° C (measuring range < 40 bar), max. 100° C (measuring range > 60 bar) Measured value display: Round housing dia 100 or 160 mm Protection: IP54 in accordance with DIN 60529 Measuring system: brass / bronze (measuring range < 40 bar); brass / CrNi Steel 1.4571 (measuring range > 60 bar) Housing: CrNi Steel 1.4301 Optional: limit signal transmitter, damping fluid filling, limit indicator needle Application areas: Mechanical and plant engineering Hydraulics Pneumatics Heating and air-conditioning technology Environment technology Industrial areas: Marine, shipping process industries paint, chemical water treatment

E8500-MK offer hand-held flue and combustion analysis solution for marine application . Being handy and light weighted, it is easy to carry on-the-go, with multiple options to suit site requirement. With its multi parameter analysis feature, it can help ships achieve and confirm compliance with MARPOL Annex-VI and the NOx Technical Code and obtain IAPP certification. Features Eight (8) Gas Sensors Total: O2, CO, NO, NO2, SO2 (Electrochemical), CO2, CxHy, High CO (NDIR) “True” NOx Measurements and Low NOx Capable Consumable Spare Parts:(10) Line Filters and (5) Condensation Filters Built–in Thermoelectric Chiller with Automatic Condensate Removal 40′ / 1m Sampling Probe (2190°F/1200°C max) with 10″ / 3m hose & Sintered Filter for probe tip Draft & Differential Pressure Measurement Multi-Channel Thermometer Software for Real–Time Data Logging, Graphing and Reporting Blue Tooth Wireless Communications Automatic Long–Term Monitoring & Data Logging with Internal Memory Efficiency & Excess Air Calculations Rotating LCD Display Protective Carrying Case Light Weight, Durable, & Easy to Transport Design CO Dilution Auto–Range for Measurements up to 20,000ppm High Temperature Probes with Sintered Filter Gas Velocity Measurements with Pitot Tube High Speed Microprocessor for faster value processing Light Weight, Durable, & Easy to Transport Design Rechargeable Battery PC Software Package ApplicationsE8500-MK is suitable for marine application to Engine, flue gas, plume emissions, maintenance and datalogging of combustion parameters. Monitoring of flue gas and stack gas composition Measure and monitor Engine & combustion efficiency Pollution monitoring and control by monitoring exhaust composition

PGD-H2S is portable, handheld battery operated gas detector for toxic limit detection and alarm for h2s gas in ambient air etc. It is equipped with large LCD display, internal alarm, flashing LED, datalogger facility, suction pump etc and safe for working in hazardous areas   PGD-H2S is portable, handheld gas detector powered by 6V battery for toxic limit detection of hydrogen sulphide in air, confined space, pipeline, sewage lines, manholes etc. It works on electro-chemical sensor technology, with either diffusion based sampling or active suction pump sampling. It is equipped with large LCD Display for alarm, measuring value readout, battery status etc. It has inbuilt alarm with LED flasher, vibration with optional data-logging facility, and RS232 output for data transfer. Key Features: Accurate detection Battery operated, portable Light weight Large LCD display Inbuilt vibration, alarm with flasher Data-logging facility Optional: sample suction facility configurable alarm limit High resolution and accuracy

Length : 300 mm

Key features: 1.optical technology; no need for electrolyte and membrane changes 2.short response time and excellent long-term stability 3.applicable for a wide range of concentrations and temperatures 4.highly accurate and virtually maintenance-free 5.sturdy aluminum housing (ip 65) key specifications: 1.liquid phase measuring range: i) 1 ppb – 2 ppm or ii) 30 ppb – 35 ppm 2.liquid phase accuracy : i) ± 1 ppb or ii) ± 30 ppb 3.gas phase measuring range: i) 0 – 4.2 % o2 or ii) 0 – 50 % o2 4.gas phase accuracy: i) ± 0.002 % o2 or ii) ± 0.03 % o2 5.response time: t90 ≤ 10 s 6.material: 1.4404aisi 316l, silicone (fda), ptfe (fda) 7.datalogging: manual and automatic with a logging time of 5 to 600 seconds; approx. 5,000 measurement values; pc software and usb-interface 8.power supply: battery operated

Brand Name : ekeindia

Storage Temperature : -30 to 60 C

Supply Voltage : AC230v

Frequency : 50-60 Hz

Length : approx. 22mm

Greenheck offers GJ, jet fans for unidirectional and reversible direction airflow, for ductless car park, tunnel ventilation system. These fans provide highly linear air flow, without need of air ducts. AMCA Air & Sound certified, these fans are highly efficient, very low sound, high performance, thereby ideal for installation high demanding application, and also in occupied areas.   Greenheck (USA) India high performance, high efficiency yet very silent jet fans. These Jet fans are ideal for installation in occupied enclosed parking area, tunnels and other areas where linear ventilation is required.  vane axial fans. Model Greenjet or GJ is available in both unidirectional series (GJ-AU) and the reversible series (GJ-AR). Both come standard with inlet and outlet silencers, inlet guards, mounting feet and aluminum die cast propellers and blades. GJ-AU series features a true airfoil propeller which is designed to move high volumes of air at a high efficiency in a smaller diameter fan. The GJ-AR features a 100 percent reversible, highly efficient, airfoil blade design. Key Features: Aluminum airfoil propeller: Move high volumes of air with maximum thrust and maximum efficiency. Galvanized casing: Continuously welded to prevent air leakage. Motor plate: Securely welded to fan inner tube to improve rigidity and prevent vibration. Silencers: Available in two options – short (one diameter length) and long (two diameter length). Direction vanes: Available on select models to direct airflow. Smoke extraction: 300°C for 2 hours (F300 Certificate 370-CPR-1745) and 400°C for 2 hours (F400Certificate 370-CPR-1848) available on select models. Tested and certified in accordance withEN12101-3:2002 IEC rated motors: 50 Hz or 60 Hz motors available, in single or two speed, VFD rated, and EFF2 orIE2 efficiency AMCA air and sound certified Key Considerations: Standards: Apply relevant codes such as NFPA, IBC, ASHRAE, and European Standards Required air changes: Optimize air flow for normal and fire modes Sound: Reduce sound levels to acceptable limits for tenants Control strategy and sequencing: Define sensor to fan correlation and system response Accessibility and aesthetics: Advise on placement of ramps, wall openings, and pedestrian exits GreenPark components: Reduce cost and optimize safety with selection and placement Typical Ventilation Applications area include: Enclosed / Basement air and smoke ventilation Enclosed / Basement car park air and smoke ventilation Tunnel ventilation Linear air ventilation, in industries etc Ductless ventilation system

E8500 is portable, hand held, light weighted flue & emission analyser for analysis of gas composition, temperature, pressure, velocity etc parameters of any type of combustion and emission, thus support in combustion & process efficiency and pollution control in industrial and commercial applications eg boiler, furnace, stack, plume, Engine etc installations. Features Configurable up to 9 Gas Sensors: O2, CO, NO, NO2, SO2, H2S (Electrochemical), CO2, CxHy, High CO (NDIR) Low NOx and “True” NOx Measurements Built–in Thermoelectric Chiller with Automatic Condensate Removal Wireless Remote Printer Draft & Differential Pressure Measurement Multi-Channel Thermometer Software for Real–Time Data Logging, Graphing, and Reporting Bluetooth Wireless Communications CO Dilution Auto–Range for Measurements up to 20,000ppm Automatic Long–Term Monitoring & Data Logging with Internal Memory High Temperature Probes with Sintered Filter Gas Velocity Measurements with Pitot Tube CO2%, Efficiency, & Excess Air Calculations Rotating & Zoom LCD Display High Speed Microprocessor for faster value processing Light Weight, Durable, & Easy to Transport Design Complies with US EPA CTM-030 & CTM-034 test methods Rechargeable Battery PC Software Package ApplicationsE8500 is a powerful, multi-feature, portable analyser designed for flue gas, plume emissions monitoring, maintenance and datalogging of combustion parameters of flue gas, stack gas, boilers, burners, gas & diesel engines, turbines, furnaces, kilns, heaters, and laboratory analysis. Monitoring of flue gas and stack gas composition Measure and monitor combustion efficiency in any industry – chemical, fertilizer, pharma, steel etc Pollution monitoring and control by monitoring exhaust composition

E4400 offer perfect solution for combustion and emission parameter analysis and efficiency measurement for any industrial and commercial application in boiler, furnace, stack, plume, Engine etc installations. Being handy and light weighted, it is easy to carry on-the-go, with multiple options to suit site requirement. Features Configurable and compatible upto 4 gas sensors True NOx Capable Carbon monoxide sensor with NOx filter Built-in local non-thermal printer, for onsite & lasting reports Draft & Differential pressure meter 2 channel thermometer Rechargeable Lion Battery for longer working hours Bigger LCD display with Zoom in/out function for better visualisation External water condensation trap PC software with USB communication cable Unbreakable metal probe & hose connections Optional: Dilution pump for CO auto-range measurement upto 50,000ppm Easy Field replaceable pre -calibrated sensor cell ApplicationsE4400 is a valuable tool designed for emissions monitoring and maintenance & tuning of combustion processes including boilers, burners, gas & diesel engines, turbines, furnaces, kilns, heaters, and laboratory analysis. Monitoring of exhaust gas composition Measure and monitor combustion efficiency of boilers, kiln, furnace, engines etc Pollution monitoring and control by monitoring exhaust composition

Greenheck model G and GB offers the industry’s best performance and durability for general clean air applications where air is discharged downward, toward the roof surface

Key Features: 1.Catalytic bead based Pellistor sensor cell with low flash energy 2. 10-bit microprocessor control unit 3.Non-intrusive one man calibration via hall effect switches 4.ATEX certified explosion proof flameproof, suitable for Zone 1, 2 gas explosion installation 5.Linear, proportional analog industry standard current output 6.Continuous system self-diagnosis with watch dog 7.Flashback arrestor with sintered filter 8.Auto Zero point tracking to zero point compensation 9.SIL 2 HW TUV certified 10.RS485 serial interface with Modbus RTU communication (optional) 11. 1 or 3 relay output module (optional) 12.System and alarm LED indicators (optional) 13.Modbus RTU communication over RS485 serial interface Technical Specifications: 1.Measuring Parameters: hydrogen gas flammability or leakage 2.Sensor Technology: Catalytic bead based pellistor sensor cell 3.Measuring range: 0 ~ 100 % LEL ( 0 ~ 4% vv @ STP) 4.Response time (t90): < 30 sec 5.Control unit: 10 bit microprocessor based 6.Warm up time: < 5 mins 7.Auto zero point tracking for drift compensation 8.Power supply: 24 VDC 9.Ingress protection: IP65 10.Enclosure: Stainless steel (for sensor cell), anti-static epoxy coated metal alloy (for transmitter) 11.Output: linear, proportional 4-20mA 12.Mounting: wall, duct, pipeline 13.Safety integrity level: SIL 2 14.ATEX marking: CE 722 Ex II 2G EEx d IIC T6, CE 722 Ex II 3G EEx nA IIC T6 15.Optional: LCD Display, alarm LEDs, potential free relay contacts 16.Hazardous area: Zone 1, 2

Greenheck offers heavy duty tunnel transit dampers, Model: HTD, with automated operation by pneumatic or electrical actuators (modulating or on / off). Based on unique airfoil blades, rugged bearing and mechnical parts, these dampers offer uninterrupted, reliable and fail-proof performance in one of most difficult working environment like tunnels, subways, coal mines, conveyors area etc.   Underground road and metro tunnels are some of the most difficult environments in the world. High humidity, dust-laden air, and limited access can make the installation and operation of ventilation systems problematic. Greenheck’s tunnel dampers, HTD series, is designed to meet these challenges. HTD dampers uses airfoil blade design with various material like galvanized steel, 304, 316 etc to meet application requirements. These are tested and compliant to NFPA 130 and 502. These are designed to keep maintenanceprocedures simple and low in frequency.HTD dampers comes with various options for actuator for automated operations. Pneumatic actuators, electrical, spring return, modulating or power on / off are some of the available actuators type. Key Features: Airfoil blades with various material options Robust, performance oriented NFPA, UL555 compliant Various actuators options available

Greenheck (India) offers high performance and high fan efficiency (upto 84% FEG) vane axial fan. Each RA Fans are AMCA air & sound certified, with sound level as low as 75 dBA. These are available upto 1600 mm diameter, with various mounting options available. These fans can be used in all air, smoke and fire ventilation application, including parking, tunnel, stairway, lifts, hall, office, exhaust, fresh air etc.

The RFD2X (Explosion proof) detector discriminates between flames and other light sources by responding only to set optical wavelenghts and flame flicker frequencies. The built-in filters and signal processing techniques help reduce false alarms due to flickering sunlight. Key Features: 1.Wide view angle – horizontal and vertical 2.Built-in Ultra violet and Infrared flame Sensors 3.Explosion Proof (ATEX Ex d IIB + H2) 4.Range of view up to 100ft. (30m) 5.Reduces false alarm by built-in combination filters and signal processing techniques 6.IP67 Rated for water and dust tight protection 7. 4-20mA Output 8. 3 built-in relays (Alarm, Fault & Warning Alarm) 9. ATEX, FM approved 10.High accuracy and repeatability Technical Specifications: 1.Measuring Parameters: flame (general) detection, fire incidence detection 2.Technology: UV IR spectrum 3.Detection range: 0- 30 meter ( 0 – 100 ft) 4.Field of View : Horizontal: 90 °, Vertical: 90 ° 5.Ambient temperature: -40 ~ +75 ° C 6.Storage temperature: -50 ~ +80 ° C 7.Power Supply: 24V DC 8.Interface: analog or relay output 9.Sensor Housing: SUS 316 10.Ingress protection: IP67 11.Approval: FM (US) 3260, ATEX Application: -The RFD2X (explosion proof) Ultra Violet Infrared flame detector is suited for installation where open flame fires may be expected. It responds to the light frequencies emitted from flames during combustion. This detector is used to detect flames from burning aviation fuels, butane, grain & feeds, hydrogen, paper, natural gas, and petrol. 1.Oil & Gas, Petrochemical, refinery 2.Chemicals 3.Cold stores 4.Pharmaceuticals, medicinal formulation

Brand Name : Fischer

Flame detector RFD2X is ATEX, FM approved instrument for general fire detection in hazardous as well as safe areas. RFD2X is based on UV / IR technology, detecting fire over long distance, with no cross-sensitivity and false alarms. It has wide view angle upto 30 meter detection range. IP67 protected with SUS 316 housing, it can be installed at any location – chemical industry, oil & gas refinery, power plants etc