Transmitter Device Dealers in Old Ginani, Bikaner

• Brand Name: Fischer
• Model Number: DE23

Working Principle: -DE23 is based on capacitance sensor element and can measure positive gauge, negative gauge or differential pressure. The pressure is measured directly by a micro-machined silicon-on-glass differential capacitance sensor element. Pressure changes cause capacitance changes interpreted by the integrated electronics. Key Features: 1.Very low pressure measurable without long-term drift 2.Rugged design 3.Maintenance free 4.Over-pressure protected Key Specifications: 1.Measuring range: 0 ~ 25 Pa to 0 ~ 1000 Pa 2.Maximum static operating pressure: 1.0 bar 3.Maximum safe pressure: 1.7 bar 4.Straight line error (max.): 1.0 % Full scale 5.Pressure connection: screw clamp connectors (aluminum) for 64 mm or 86 tube 6.Repeatability: 0.1 % full scale 7.Operating ambient & media temperature: -10° C to +70° C 8.Protection class: IP65 per DIN EN 60529 9.Linearity: < 2% Full scale 10.Electrical output: 4-20mA linear, 2 – wire 11.Power supply: 24 V DC 12.Material, housing: Polyamide PA 6,6 13.Materials, media contact: Silicon, PVC, aluminum, brass Application areas: 1.Filter status condition monitoring 2.Precision air duct measurement 3.Clean room pressure balance monitoring 4.Burner air feed low pressure detection 5.Oven air feed control

Working Principle: The pressure is applied directly to a ceramic diaphragm, causing a deformation. This mechanical deformation is converted to an electric signal by means of DMS-bridge located at the rear side.An electronic system is integrated in the set-up of the appliance, converting the DMS – signals to electric standard signals – 4~20mA / 0~10 VDC. Key Features: High accuracy Robust and compact design Overload protection High vibration resistant Minimum hysteresis Key Specifications: Measuring range: -1.0 ~ 0.0 bar to -1.0 ~ -24.0 bar (max. pressure: 3 ~ 80 bar) 0.0 ~ 1.6 bar to 0 ~ 60.0 bar (max. pressure: 5 ~ 200 bar) Linearity: < 1% full scale Hysteresis: < 0.5% full scale Permissible ambient temperature: 0° C ~ +60° C Permissible medium temperature: 0° C ~ +85° C Protection class: IP65 acc. to DIN EN 60529 Materials (media contact): chrome nickel steel 1.4305, ceramics, AL2O3, gaskets Material (housing): Chrome nickel steel 1.4305 Nominal power supply: 24 VDC / AC Output: linear, 4~2-mA / 0~10 V, 2/3-wire   Industrial areas: Nuclear power plants Thermal / gas fired power plants Chemical & manufacturing industries Semiconductor plants