Assembly Pastes Dealers

We offer Assembly Paste. Assembly Paste # SS 7101 COMPOSITION Assembly Paste # SS 7101 contains high concentration of Molybdenum disulphide, Mineral oil, lithium soaps & other specialty solid lubricants. FEATURES Assembly Paste # SS 7101are designed to prevent damage to surfaces while sliding against each other at high loads and low speed such as assembly or disassembly of bearings, press fitting etc. It provides closer fits without jamming and lowers the force required during assembly of close or tight fitting parts. Its special lubricating properties provide lubrication up to the yield point of most metals. DESCRIPTION The excellent lubricating properties of ASSEMBLY PASTE are due to the hexagonal structure of its constituent, Molybdenum disulphide, which has alternate layers of molybdenum and sulphur atoms. When an assembly paste is applied to metal surfaces, the Molybdenum disulphide in the paste makes layers on the metal surface known as lamellae. These lamellae are practically incompressible and thus are capable of withstanding tremendous load. Although the lamellae cannot be compressed, they do not resist shear forces (sliding friction). Infact they provide excellent lubrication due to their ability to slide over each other without any resistance. Layers formed by this paste of metal surfaces are serviceable from - 25 C to 550 C. Having extremely low coefficient of friction; it protects components, during critical wear in damages, from fretting, seizure and galling. It handles extreme pressures and gives complete protection during critical start up and running in period.

we offer crc graphite assembly paste + mos2. 1. general description a universal assembly spray paste. special sprayable paste which contains a combination of the extremely pressure-resistant solid lubricants molybdenum disulphide (mos2 ) and graphite, stabilised in adhesive mineral oil. 2. features high load-carrying capacity reducing the appearance of the grooves when inserting components water-repellent good corrosion protection oxidation resistant high thermal stability (up to 650°c) very good adhesion prevents seizing prevents fretting corrosion, scuffing and stick-slip constant ratio of starting torque to initial tension smoothes out rough surfaces 3. applications mounting of longitudinal press fits, eg. for bolts and bearing seats assembly of seals and screws surface treatment of rolling and sliding bearings to improve the running-in and to extend lifetime lubrication of guides and joints with very slow sliding movement bearing lubricant for wheel bearings and kiln carts lubrication of all types of open gears running-in lubricant of new gear wheels 4. directions shake can very well till agitator ball is free apply a thin, even layer as running-in for rolling and sliding bearings, polish the applied product with a soft cloth. remove any excess. as running-in for new gear wheels : let the gears operate at a low speed and with a low load (eg. moving by hand) without the operating lubricant.then fill the system with the lubricant. 5. typical(*) product data temperature range : -30°c to +650°c load carrying capacity (four-ball welding load) (din 51350) : 7.000 n flash point of aerosol : < 0°c

• Shelf Life: 24 Months from Date of Manufacture in Sealed Condition.
• Packaging: 500 g (brushtop) - 1 kg - 5 kg

Solid lubricant paste for effective running in, assembly, press fitting and anti seize applicationsBenefits\n\nExtremely wide service temperature range of -25°C to +450°C (up to +630°C in areas with restricted air access)\nLow coefficient of friction\nHigh pressure withstanding capacity\nLoad bearing capacity exceeds the yield point of most metals\nOffers protection from wear and friction\nEliminates metal-to-metal contact\nPrevents seizure, scoring, galling, fretting corrosion and stick slip\nMakes disassembly easier and non-destructive irrespective of operational period or conditions\nEconomical to use owing to its high surface coverage capacity\nAids running in and provides emergency lubrication during start ups\nPrevents cold welding and stick slip\nGood affinity for metal surfaces\n\nApplications\n\nAs a running-in, metal priming paste for all new or rebuilt mechanical equipment such as journal bearings, gear boxes, splines.\nAs a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.\nFor lubrication of all sliding metal surfaces to reducewear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splines shafts, pumps,\nvalves, threaded spindles, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings.\nAs a metal working lubricant to prevent galling, seizure, welding and metal pick up on tools and dies in deep drawing, machining, punching, stamping, thread rolling,\ncold heading, waging and forging.\nAs a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.\nAs an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.\nAs a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling.\n\nMethod of Application Clean the sliding surfaces and friction points. Apply this paste with a brush or cloth and rub intensively on the metal surface to form a thin uniform film. Do not use in excess as is customary with greases. Do not mix with other oils or grease.

• Brand Name: ISOL
• Application: Pin bearing, sliding bearings, pistons, gears drives & open gears, wheels, fly wheels, key-ways.
• Place of Origin: Greater Noida
• Product Name: Assembly Paste (Moly Grease)
• Packing: 1 kg, 10 kg, 35 kg & 200 kg.
• Condition: Good

We are capable of catering to buyers anywhere in Delhi(India) as well as any other place. We have resources to reach the buyers' Delhi(India) with ease. Buyers are required to place orders; timely deliveries of consignments are our primary concern.   Composition : ISOL AP 101,Assembly paste contains high concentration of Molybdenum disulphide, Mineral oil, lithium soaps & other specialty solid lubricants.Features : Assembly pastes are designed to prevent damage to surfaces while sliding against each other at high loads and low speed such as assembly or disassembly of bearings, press fitting etc. It provides closer fits without jamming and lowers the force required during assembly of close or tight fitting parts. Its special lubricating properties provide lubrication up to the yield point of most metals. Description : The excellent lubricating properties of ISOL AP 101 are due to the hexagonal structure of its constituent, Molybdenum disulphide, which has alternate layers of molybdenum and sulphur atoms. When an assembly paste is applied to metal surfaces, the Molybdenum disulphide in the paste makes layers on the metal surface known as lamellae. These lamellae are practically incompressible and thus are capable of withstanding tremendous load. Although the lamellae cannot be compressed, they do not resist shear forces (sliding friction). In fact they provide excellent lubrication due to their ability to slide over each other without any resistance. Layers formed by this paste of metal surfaces are serviceable from - 25 C to 550 C. having extremely low coefficient of friction; it protects components, during critical wear in damages, from fretting, seizure and galling. It handles extreme pressures and gives complete protection during critical start up and running in period. Applications : Assembly of auto parts, pin bearing, sliding bearings, pistons, gears drives & open gears, wheels, fly wheels, key-ways, bolt screws and nuts, bushings, spline shafts, slide-ways guides, universal joints, chucks, machine tools etc.Packing : 1 kg, 10 kg, 35 kg & 200 kg.

• Temperature Range: -100 DegreeC up to +550 DegreeC
• Weight: 500g
• Packaging Type: Tin Can
• Molybdenum Disulphide: 0.5 to 5.0 microns
• Graphite: 1.0 to 8.0 microns
• Flash Point: >200 DegreeC
• Solidification Point: -20 DegreeC
• Coefficient of friction: 0.08
• Features: Protects against rust and corrosion,Ensures bedding in without scuffing or scoring

• Dispensing Method: Jar
• Volume: 25ml
• Product Range: 847 Series
• Brand Name: MG CHEMICALS
• Part Number: 847-25ML

• Brand Name: Molygraph
• Model Number: WAP 100
• Base: Lithium

we are offering white assembly paste especially designed to meet non-staining assembly. benefits : 1. light colour has advantages over dark coloured greases. 2. helps prevent staining during assembly. 3. excellent lubrication properties. 4. finds use as antiseize and anti stick agent. 5. prevents water washout. 6. guards against rust & corrosion. applications : for machinery used in textile, paper, printing press, home appliances, office equipment, plastics, food and beverages, instrumentation, optics, electronics, pharmaceutical and related industries where deep coloured lubricants are not recommended.

Assembly Paste, Mould Release Spray, textile emulsion, Silicone Sealants

Assembly Pastes, Cnc Machined Components, Custom Gear Boxes

carbon assembly paste, Calcined Petroleum Coke, coal tar products

Metal Assembly Paste, neat cutting oils, Turning, High Performance Taps

exhaust assembly paste, High Temperature Corrosion Resistant Coating

Assembly Pastes, extreme pressure lubricants, rolling oil

We are offering assembly paste fps 400 ml.

White Assembly Paste, Cold Galvanizing Zinc Coating

MI-Setral-5 B, Silicone Grease, Coratex Purging Emulsion

Super Assembly Paste, structural glazing sealants