PLC Extension Ethernet Module
3,000 Per Piece
To make delivery of consignments within the promised time, we have an excellent supply chain network in place. Clients can stay assured for the products that we offer, as they will remain damage free. For this, we make use of premium packaging material for wrapping them. Other Details : Output 6x Relay/10A Easy
High Speed Ethernet Data Acquisition Module
Get Price Quote
The PET-7H16M/PET-7H24M is a high speed data acquisition devices with a built-in POE Ethernet communication port for data transfer over a network. PET-7H16M includes 8 high-speed 16-bit single-ended Analog input channels (200 kHz sample and hold for all 8 channels) and PET-7H24M includes 4 high-speed 24-bit differential Analog input channels (128 kHz sample and hold for all 4 channels). All high speed data acquisition modules allow A/D signal conversion simultaneously on each channel and provide the programmable input range on all analog input channels. In addition to supporting Analog Input channels, the module also provides Digital Input / Digital Output / Counter / Encoder with different combinations and different numbers of channels. The module provides a programmable input range on all analog Input channels, and the Digital Output can be set to output with short-circuit and overload protection. The counter value of DI counters and High-speed counter are latched by ADC sampling time synchronously. The Encoder Input channel can be configured as Quadrant, Pulse/Direction or CW/CCW input mode. The module provides 4 kV ESD protection as well as 2500 VDC intra-module isolation. The PET-7H16M/PET-7H24M supports more kinds of trigger modes for A/D conversion: software A/D trigger, external clock trigger, external digital signal event trigger (Post-trigger/Pre-trigger/Delay-trigger) and analog trigger. The software trigger can acquire a sample whenever needed, and the continuous A/D acquisition or the acquisition of N data samples begins after the command is triggered. In external clock trigger mode, the speed of the A/D acquisition and the amount of data acquired are controlled by external electrical signals. In digital signal event trigger mode, the A/D acquisition parameters are configured via a command and the A/D acquisition of the N data samples is started while triggered by an external electrical signal. The analog trigger mode triggers when the analog input value is higher or lower than the set specific voltage value, and starts the A/D acquisition of the N data.
Best Deals from Ethernet Module
Moxa EDS205V2.1 Ethernet Switch Module
Get Price Quote
5 Piece (MOQ)
2 Port TTL UART to Ethernet Converter Module (TCP232-E2)
1,332 Per piece
1 Piece (MOQ)
0.0
View Profile
Siemens Industrial Ethernet Communication Module
Get Price Quote
The MVI56E Siemens Industrial Ethernet Communication Module allows Rockwell Automation ControlLogix Programmable Automation Controllers (PACs) to interface easily as an Ethernet Client with up to a maximum of 20 Siemens S7-200, S7-1200, S7-300, and S7-400 PLCs operating as Ethernet servers. The module uses ProSoft Configuration Builder (PCB) which provides a graphical configuration tool for management of module configuration files, as well as viewing communication and module diagnostic information using the high-speed Ethernet port. Commands are enableddisabled from ladder logic enabling various Siemens S7 CPUs to support multiple applications without having to reconfigure the module. Data transfer to a ControlLogix ® PAC uses scheduled IO data for faster updates and better performance.
0.0
View Profile
1756-ENBT ControlLogix Ethernet Communication Module
Get Price Quote
Allen-Bradley 1756-ENBT ControlLogix EtherNet/IP 10/100 Bridge Module Features : Twisted Pair Supports a maximum of 64 TCP/IP connections and 128 Logix connections (I/O and information) Unicast Available in RSLogix 5000 Software Version 16.03.00 or later Socket Services SNMP Support (password required) Duplicate IP Detection (starting in Revision 3.3) Our highly skilled Engineer can repair your 150F-108NBD. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair and sale process.
IC697CMM742-LL ETHERNET INTERFACE
Get Price Quote
1 Piece(s) (MOQ)
Model no : ic697cmm742-ll product type :ethernet interface supply voltage 5 v dc;12 v dc current rating 2 a @ 5 v dc;0.5 a 12 v dc for use with ic697 plc;series 90-70 data transfer rate 19200 bit/s;10 mbit/s manufacture :ge fanuc usage : indutrial automation warranty : 1 year .
0.0
View Profile
Ethernet Module
Get Price Quote
70 Piece(s) (MOQ)
0.0
View Profile
Ethernet IO Module
9,950 Per Piece
1 Piece(s) (MOQ)
The eth io � 2.0 unit enables the user to monitor the analog and digital inputs, control relay outputs. The status of the slave units are connected to it through modbus protocol. A single box of eth io � 2.0 contains 8 analog inputs, 8 digital inputs, 8 potential free relay contacts, a query based response unit on the rs 232 bus, and a rs 485 port to connect to the slave units. Up to 6 slave units can be connected through the rs 485 interface. Using the lan (rj45 connection), all of the information of the inputs and the status of the different units which are connected to it , will be sent to the main server.
0.0
View Profile
Network Module
Get Price Quote
Cisco Network Modules (NM), Enhanced Network Modules (NME) and Expansion Modules (EM) to equip your network facilities.
0.0
View Profile
24 Digital Input Output module with Ethernet
15,000 - 30,000 Per Unit
0.0
View Profile
IC200SET001 is a serial to Ethernet network adapter module
Get Price Quote
1 Piece(s) (MOQ)
Ic200set001 is a serial to ethernet network adapter module ge intelligent platforms, the ic200set001 is a serial to ethernet network adapter module, ge intelligent platforms, the ic200set001 is a serial to ethernet network adapter module from the versamax series of plc components. . With this product, serial devices can be connected to an ethernet network using the tcp/ip protocol suite
0.0
View Profile
Ethernet IO Module
10,669 Per Piece
100 Piece (MOQ)
0.0
View Profile
Ethernet Module
Get Price Quote
UART to Ethernet module which supports D2D forwarding and virtual serial. TTL & Ethernet Bidirectional Transparent Transmission This is a serial TTL to Ethernet module,used for data transparent transmission.USR-TCP232-T is a data transparent transmission equipment for converting TCP or UDP socket data to serial UART.
0.0
View Profile
Ethernet Module
Get Price Quote
The ENC28J60 Ethernet Module is cute little module for when you need to add Ethernet functionality to your project and serves as a great option to get started with Ethernet for embedded systems. ENC28J60 is a stand-alone 10Base Ethernet controller with industry standard SPI interface. It is fully compatible with 101001000Base-T Networks.The ENC28J60 works on 3.3V but the IOs are 5V tolerant making it ideal for using it with your favorite MCU. It also consists of an 8-Kbyte buffer.
0.0
View Profile
Ethernet IO Module
Get Price Quote
Pepperl+Fuchs’ expertise in fieldbus connectivity for both factory and process automation is built on decades of experience. With new Ethernet IO modules, Pepperl+Fuchs is expanding its product portfolio with additional interfaces to industrial fieldbus systems. The new modules offer an array of innovative features to provide users maximum flexibility and efficiency. Whether PROFINET, EtherNetIP or EtherCAT, the modules support all common Ethernet protocols, and you can easily set the desired protocol type using the rotary selector on the device. Due to this multi-protocol capability, the modules are compatible with all common PLCs. This makes them easy to integrate into existing installations, independent of the type of PLC, and reduces the number of components needed. The result is lower costs and the ability to standardize plant design.
0.0
View Profile
ethernet modules
Get Price Quote
We are the main supplier of this product.
0.0
View Profile
Ethernet Module
Get Price Quote
WIZ107SR is the compact sized serial to Ethernet module using W7100A, WIZnet iMCU, 8051. WIZ107SR is the protocol converter that transmits the data sent by serial equipment as TCPIP data type, and converts back the TCPIP data received through the network into serial, data to transmit back to the equipment, Connect with the Serial Device directly, Adding Network Function Simply and Quickly, Providing Firmware Customization, High System Stability and Reliability by using W7100 Hardware Chip Supports Serial Configuration &ndash with Simple and Easy command, Supports Password for the Security, Easy & Powerful Configuration Tool Program, 10100 Ethernet Interface and max 230Kbps Serial Interface, RoHS Compliant.
0.0
View Profile
IXXAT ETHERNET MODULE
300 Per Piece
1 Piece(s) (MOQ)
ixxat can@net ii v1.4 ethernet module 1.01.0086.90001 hw841390 model: can@net ii version: v1.4 type: ethernet module condition: used & working qty: 1 pc available ref: kk.
UART To Ethernet Module
Get Price Quote
Specifications UART To Ethernet Module We are one of the leading service providers and traders of UART To Ethernet Module. Our products are widely known and appreciated among our clients as these are procured from the trusted vendors and ensures high-grade quality of products. Our products are made after stringent quality tests and are availed without any compromises with the quality. Following are Details of the products: It is an integrated serial to Ethernet module. It has power supply, rj-45 and db9/m,etc. It is easier to use. SupportsTCP server,TCP client and UDP 10baset/100basetx auto negotiation Support auto mdi/mdix Support UDP multi-casting Support dhcp (dynamic host configuration protocol). Acquire dynamic ip and other network parameters from dhcp server UART data format can be configured. UART baud rata is from 1200bps to 230400bps UART interface supports 5v (or 3. 3v) TTL (CMOS), rs-232c and rs-485 Rs-485 re/DE control output. Support rs-485 interface Operation state output. M cu may check the signal to inspect module operation Network parameters preserved in non-volatile memory. No need configuration after power on every time Support configuration through UART and network DC 5. 0v (3. 3v) power supply. Power consumption ≤ 180ma Module has UART TTL rs-232 (rs-485) converter. Rs-232c (rs-485) via db9 output.
0.0
View Profile
Post Free Ad
