Digital Trainer Dealers

• DC Power Supply: 5 V / 500 mA ( IC based regulated output ).
• Clock  Generators( TTL, 5V ): i.  Fixed  :  a.  0.1Hz  b.  1Hz.  ( Simultaneous independent outputs ).ii. Variable : One low frequency variable clock generator.
• Manual Pulser: One independent buffered bounceless manual pulser ( useful for freezing the action of each stage of the counter  after  every clock pulse ).
• Logic Level Inputs: Eight independent buffered logic level inputs to select High / Low TTL levels, each with a LED to indicate high / low status and termination.
• Logic LevelIndicators: Eight independent buffered logic level indicators for High / Low status indication of digital outputs.
• Zif socket: Unique Zif type socket 20 pin without soldering.
• Potentiometer: One Potentiometer ( 100K ) with terminations.
• Power ON: Power ON switch with indicator for mains on indication and fuse for protection.
• Patch Cords( Stackable ): Set of 20 assorted coloured multi-stand wires with 2mm stackable plug termination at both ends.
• Power Requirement: 230V + 10% single phase AC.
• Instruction manual: One detailed instruction manual with well thought out experiments covering the above topics.

Product Category :  Audio, Video, Radio, Television Lab Trainer (Series : 200-D)   Product Name : LED HD Digital TV Trainer with Faults creating facilityModel No.: SA-932Product Details : SINCOM's LED HD TV Trainer is intended to demonstrate the working, Signal analysis, Voltage analysis and troubleshooting of LED HD TV Receiver (Digital TV) with LED Display panel and Remote control. The trainer is fully comprehensive, easy to understand and perform experiments on LED TV. This has functional block Diagram printed in multicolour on the front panel of the board with maximum test points and control sections, completely enclosed in elegant wooden cabinet. The LED Display panel 22" is enclosed on front panel. The colour LED HD TV receiver is Digital TV circuit with RF Tuner Input, AV Input, Component Video Input, USB Input and Remote control. On board AV/TV, Volume, Channel selection and Menu controls. On board Remote receiver sensor with LED indications. On board Power ON/OFF control. On board AV In, USB Input, Component Input, VGA Input  and AV OUT control. Facility to control all functions by Remote. Fault created by Switches in UP-Normal & Down-Faulty condition. Facility to study Signal and Voltage analysis of all sections separately. Facility to create 20 Faults on all sections. Technical Specifications : TV Systems- CCIR-B, NTSC/PAL-G, 625 lines. Power Supply - 230V ± 15 % AC 50Hz Regulation  - 195V AC to 265V AC Power Consumption  - 60 Watt Tuner Input- RF VHF/UHF Display Type        - LED, HD Display Size- 22''  (Diagonal) Sound Output  - 10 Watt max. RF Input Impedance  -   75 Ohms RF Sensitivity  - 50 mv Distortions  - 10 to 15% in live program Controls on Board -  Volume, Channel selection, Brightness, Contrast, Colour, Menu Remote Control  - Control all functions   Operating In Mode - AV and TV Input Control  - Audio and Video In, HDMI Output Control  - Audio and Video Out Total Faults - 20 Objectives : To study the concept of Colour TV System. To study the principle of CTV Receiver. To study the Block diagram of LED TV Receiver. To study the control Panel of LED TV. To study the various sections of Digital LED TV Receiver. To study Remote Control section. To study Switched Mode Power Supply. To observe and note the Voltages at various sections.   To observe and note the signals/waveforms at various sections.   To study the 20 faults on all above sections of LED TV Receiver. Accessories Included :  Remote Control, Set of Patch cords and detailed Instruction manual.

We are one of the Digital IC Trainers Manufacturers, based in India. We strictly use up-to-date equipments in the entire manufacturing process assuring optimum quality production. And the whole manufacturing process is backed under the proper guidance of trained technocrats. We supply different types of Integrated Circuits Trainers. We are also one of the noted Digital IC Trainers Suppliers. We have a team of target oriented professionals having voluminous experience in the manufacturing as well as supplying of wide gamut of digital IC trainers, integrated circuits trainers etc. We present Advanced Digital IC Trainer at the most competitive price. User friendly design and features with Powder coated cabinetsInbuilt variable power supply 1.5v to 32V/1AFixed power supply +/-5v, +/- 12v/1A.Crystal Based clock pulses 1Hz to 1M HzMono pulse with high and low pulseLogic Input with soft switch with bi color indicationLogic output with high/low with bi color indicationcommon Anode/Cathode display with selector switchZip sockets with 16 pin/20pin option � 40 pin on requestvSolder less bread board.All terminal on 2mm Banana sockets2mm Banana Terminals probes (Patch cords � 10 sets)

• Color: Black

  Advanced lab trainer for students to perform more than 100 experiments of analog & digital electronics Compatible with optional ready to use experimental modules Glass Epoxy PCB used as front panel & mounted on light weight shock proof Plastic cabinet On board power supplies, Function generator, and other input signals Bread board provided Supplied with connecting wires

Having a definite quality management system, we are regarded as the noteworthy manufacturer and supplier of Digital IC Trainer.This trainer kit is tested on various predefined parameters to deliver defect free product to the clients. Offered  trainer kit is designed to educate people to design, test and evaluate digital circuit in easy way. Provided kit is customized in various specifications as per the need of the client. Additionally, we provide this Digital IC Trainer to clients at rock bottom prices.   Features:     Corrosion resistance   Excellent functionality   Compact design   Smooth finish Details:                                          Trainer consisting of   Regulated power supply of +5V/1 Amps.,   Clock Generator (1,10 &100Hz),   logic input switches(Bounceless) - 8  No.,   output LED indicators(Buffered)  - 10 No.,   seven segment display with decoder IC ( 2 No.) ,   Big Size board with all IC mounted beneath the front panel   & Functional diagrams of all digital circuit e.g. logic gates (AND,  OR, NOT, NAND,  NOR &  EX-OR 4 No. each) ,   Multiplexer, RS, D & JK flip flops, Decade & Binary Counter, Universal Shift-registers,Full adder,Magnitude comparators, Decoders etc. ,   IC bases of 14 & 16 Pins for mounting any additional IC are also provided.

• Country of Origin: India
• Warranty: 2Years

Features: To understand basic theory of digital and analog communication. Design and implementation ability training of analog modulator and demodulator. Design and implementation ability training of digital modulator and demodulator. To understand the applications of balanced modulator circuit.

Specifications Aesthetically designed injection moulded electronic desk / Master unit carrying useful experiment resources like variable. Power supplies / Status Switches / Indicator probe / Pulsar / Function Generator DPMs etc. Connection through study 4mm Banana Sockets & patch cords. Built in bread board panel with 1280 tie points and 400 distribution points totalling to 1680 points along with 4mm banana sockets for tapping from the trainer +5V, +/-12V/ GND for the circuits to be assembled on bread board using single stand (#22/24) wire.

Digital Electronic Circuit Trainer (Bread Board Model) Features : 1. Basic trainer for students to perform more than 15 basic experiment of operational amplifier. 2. Glass Epoxy PCB used as front panel of 300mmx220 & mounted on light weight shock proof plastic cabinet. 3. On board power supplies, function generator & Bread Board mounted. 4. Supplied with set of components & connecting wire.

• PHASE LOCKED LOOP: 6,500

pll trainer board study of pll digtal pll analog pll .

• Brand Name: Nvis
• Certification: ISO 9001-2008
• Model Number: Nvis 6551
• Place of Origin: Indore, MP
• Input :: +5V DC
• Logic levels +5V: HIGH ( Logic 1 )
• Logic levels 0V :: LOW ( Logic 0 )

Experimentation with Logic Gates Nvis 6551 is an elite training system for the digital laboratories. It is useful in understanding the basic concepts and functioning of logic gates and their truth tables. Nvis 6551 describes the AND, OR, NOT, NAND, NOR, XOR and XNOR gates in a very easy way. The training system is designed in such a way that for performing any experiment students have to connect the links by patch cords, so it is very helpful for students to learn the inputs and outputs of different logic gates. Attractive input and output sections are provided on trainer in such a manner so that multiple experiments can be performed simultaneously.

DIGITAL IC TRAINER APPARATUS KIT (Model: IL-04) Specifications: Built in 8 logic inputs with SPDT switches at 5VOnboard output LED sockets Onboard fixed 12V, 5V & Gnd at 250mAOnboard Breadboard for connectionsFixed & Variable Clock on board Variable 10K & 47K potentiometers on board Required Number of patch cords Operation Manual 

• Type: Digital Electronics Trainer Kit
• Color: Blue, Grey, Light White, Metallic, Silver, White
• Voltage: 110V, 220V, 380V, 440V, 525V
• Condition: New, Old
• Power Type: AC, DC
• Operating Temperature: -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C
• Frequency: 50Hz, 60Hz
• Driven Type: Battery, Electric
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance
• Warranty: 1Year

• Type: Digital Communication Trainer
• Certification: CE Certified
• Application: Electronic Lab Use
• Color: Metallic
• Condition: New
• Operating Temperature: -25 +85deg C
• Frequency: 50Hz
• Driven Type: Battery

Basic trainer for students to perform more than 15 basic experiment of operational amplifier. Glass Epoxy PCB used as front panel of 300mmx220 & mounted on light weight shock proof plastic cabinet. On board power supplies, function generator & Bread Board mounted. Supplied with set of components & connecting wire.

RF Input 950-2150 MHZ with Input Impedance : 75 Ohm RF Output 470MHz to 862MHz (approx) Ku & C band type LNB are provided. 6" Dish Antenna with Dish Input F type Connector RCA type Composite Video Output,Audio Output,TV Output. PAL/NTSC Video Output IF Frequency Bandwidth 27MHz-36MHz Video Output level 1Vpp (75 load) 352 x 288 Image Resolution Controls Power, Menu, Channel Up/Down OK, Left, Right 17 nos of Test Points provided. Power Supply 110V - 260V AC, 50Hz/60Hz Dish Antenna & LNB Should be mounted on Alluminium profile.

t is designed start students with the basics of digital technology and then to advanced digital topics. The level of training is further extended with the applications boards which allow students to apply their knowledge to real circuit applications. The trainer is available in a variety of configurations and in a modular format.Labtech’s Digital Trainer is a modular course covering concepts, theory and applications for digital electronics training.

• Brand Name: TAGLab

We are offering full adder tla205. Characteristics of full adder using digital ic verification of truth table of full adder.

• Brand Name: UNICON

We are offering digital lab trainer (dlt) overview: the digital lab is intended for elementary as well as advance training of digital electronics. The digital lab covers regular digital circuits by solder-less interconnections on breadboard and as well as compatible with all optional modules through use of 2mm brass terminals and patch cords. Various clock generators, logic level inputoutput indicators and dc regulated power supplies etc. Are in-built. The unit housed in attractive enclosure is supplied with mains cord, patch cords, instruction manual and component set. techincal discription: bread board : unique solder-less large size, spring loaded breadboard consisting of two terminal strips with 1280 tie points and 4 distribution strips with 100 tie points each, totaling to 1680 tie points. (size : 112mm x 170mm approx) regulated dc power supply : +5v at 1 amp, -5v at 500 ma, 3 to +15v at 500ma, and -3 to -15v at 500 ma. Pulse generator : 1 hz to 100 khz in 6 steps. Variable in between steps - amplitude : 3-15v (cmos), 5v (ttl) - duty cycle : 50% ttl cmos output pulsar switches : 1 independent buffered bounce free manual pulser (useful for freezing the action of each stage of the counter after every clock pulse) data switches : 12 nos. Independent buffered logic level inputs to select high low ttl levels, each with a bi-color led to indicate high low status and termination. Logic indicators : 12 nos. Independent buffered logic level indicators for high low status indication with bi-color led for digital outputs seven segment display : 2 nos. Bcd to seven segment decoder driver ic with terminals logic probe : logic level indicator for ttl cmos cmosttl : provided power : 230 v ± 10%, 50 hz components provided : ics-40011, 40491,40691, 74001, 74021, 74041, 74061, 74082, 74102, 74113, 74202,74323, 74742,74762,74861.resistors-330e1,1k2, 1k81,,15k1, 47k1.1m2, capacitors- 0.01mf1, 0.1mf1, 0.22 mf1,crystal-32.768mhz1.

We offer Analog-Digital Trainers that finds application in broadcast, satellite communication, research, academic and educational institutes. Fabricated from quality material the trainers are used in different experiments. These are available in different specifications like indicator, clock generator, pulse generator, logic probe, potentiometer and many more.Some of the distinguishing features of our range include:* Designed with the assistance of advance technology* Precision engineered* Available in different models* Optimum quality* Easy installationOur range finds application in the areas enlisted below:* Indian defense academy* Defense research and development organization* Telecommunication industry* Military* Broadcast* Aerospace* Satellite communication* Government agencies* Academic institutions* Public utilities* Manufacturing facilities* Educational centers* Research institutes

• Use: To study and understand the logic and integrated circuit operations in digital electronics.
• Built in Regulate power supply: DC +5V
• Housing: It is mounted in an elegant cabinet (CNC Machine finish) for better viewing and portability
• Dimension: 45cm x 45cm x 18cm
• Frequency Range: 50 – 60Hz
• Instruction Manual: Step-By-Step detailed instruction manual.
• Weight: 6 Kgs
• Power Supply Voltage range: AC 100V – 230 V

With onboard one Bread board QUAD 2-input NAND Gate using IC 7400 – 01 No QUAD 2-input NOR Gate using IC 7402 – 01 No NOT HE X Inverter using IC 7404 – 01 No QUAD 2- input AND Gate using IC 7408 – 01 no QUAD 2- input OR Gate using IC 7432 – 01 no QUAD 2- input XOR Gate using IC 7486 – 01 no 4 input NAND using IC 7421 -01 no 4 input NOR using IC 7425 – 01 no TR-3- input NAND Gate using 7410 IC – 01 no BCD seven segment decoder using 7447 IC – 02 no.s 4-bit parallel adder using IC 7483 – 02 no.s Dual D flip-flop using 7474 IC – 02 no.s Dual Master slave JK flip flop using 7476 IC – 02 no.s 4-bit counter using IC 7493 – 02 no.s 4 bit comparator using IC 7485 – 01 no 4 bit ALU using IC 74181 – 01 no Dual 4:1 multiplexer using IC 74153 – 02 no.s QUAD 2:1 Multiplexer using IC 74157 – 01 no Dual 2x4 decoder using IC 74155 – 01 no 8:1 multiplexer using 74151 IC-01 no Shift Register using IC 74194 – 01 no Shift Register using IC 74195 – 02 no.s 6X4 RAM using IC 74189 – 01 no Logic level input switches with LED indicators to    indicate Status of HIGH or LOW 16 No.s 16 – pin DIP IC Bases – 02 no.s 14 - pin DIP IC Bases – 02 no.s Single shot pulser (-Ve & + Ve) – 01 no Fixed DC Power supply (+5V,-5V,+12V,-12Vwith switch control -01 Fixed Clock selection (1Hz,10Hz,100Hz,1KHz,2KHz,4KHz,&8K ALL IC’S ARE MOUNTEDON IC BASES WITH ENCLOSURE

• Specification: 10 nos. of TTL compatible logic level inputs , TTL logic selectable by a toggle switch.

Digital & Analog Trainer kit is a comprehensive and self – contained system suitable for anyone engaged in Analog circuit experiments & digital logic experiments. . All necessary equipments for Analog circuit experiments & digital logic experiments. It is a time and cost saving device for both students and researcher interested in training, developing and testing circuit prototypes.

• Type: Digital Trainer
• Application: Electronic Lab Use
• Color: Blue, Grey, Light White, Metallic, Silver, White
• Voltage: 110V, 220V, 380V, 440V, 525V
• Condition: New, Old
• Power Type: AC, DC
• Operating Temperature: -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C
• Frequency: 50Hz, 60Hz
• Driven Type: Battery, Electric
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance
• Warranty: 1Year, 2Years, 6months

• Brand Name: Digital Power Solution
• Application: Educational
• Screen Size: 15 Inch
• Place of Origin: Moradaba,Delhi

Our products are made using high grade components that provide strength and durability to the finished structure. It is in our consistent effort to design and develop acdc power supplies, all geared lathe machines, and more in compliance with the industrial norms of quality and other related norms. We manufacture these products following all the necessary guidelines that have to be maintained to make the products up to the standards of market level.

Nvis 7036 Ward Leonard Method of DC Machine is an elite training system for Electrical Laboratories. The product helps you to get fully acquainted with the basic concepts and functioning of a DC machines. The product demonstrates the Ward-Leonard Method of DC Machine through which user can not only operate but also control the speed of DC Machine in either direction without using DC supply. Separate terminals of Armature and Field windings are brought out on a terminal box fitted on top of the Motor so that one can connect them separately to the panel and can perform experiment correspondingly. Reverse connecting Switch is provided to control the speed of DC Motor in either direction. The trainer thus provides explicit understanding of the subject. All protection devices are in built so there is almost no chance of fault or danger to user. Product Features Exclusive and Compact Design Electrical Loading Arrangement Flexible Shaft Coupling Arrangement Provided with Digital Tachometer Machine with Class “B” Insulation Heavy Duty Base/Channel Equipped with Supply Indication Lamps Terminals Provided to Use the Optional Externally Equipped with Supply Indication Lamps Designed by Considering all the Safety Standards Diagrammatic Representation for the Ease of Connections Product Tutorial Scope of Learning Study of the speed control of Separately Excited DC Shunt Motor in either direction by Ward Leonard Method.

• Usage: Laboratory
• Power Supply: 5V DC, 1 Amp
• Automation Grade: Automatic
• Power Source: Electric
• Digital Inputs: 12nos. digital inputs with Led indicators and toggle switches.
• Digital Outputs: 12nos. digital inputs with Led indicators.
• Zif Sockets: 1 Nos 40-pin universal connecting strips using ZIF Socket for study Memory & ALU and also additional 04 nos.16 PIN ICs insertion facility.
• Manual Clock: 2 Nos. on board for user.
• Auto clock: 1 Nos. on board for user.
• Display: 2 Nos. segment display on board.