Elastomeric Coatings Dealers

Rain guard is an elastomeric polymer with the property of viscoelasticity (“elasticity”), generally having notably low young’s modulus and high yield strain compared with other materials.

• Type: Acrylic Polymer Waterproofing Coating
• Color: white
• Purity: 99%
• Form: Liquid
• Packaging Type: Pail
• Packaging Size: 20 Kg
• Application: Seed Coating

RAINSEAL: Polymer emulsion, 100% Acrylic coating, is an elastomeric, single pack roofing compound, which is designed as membrane coating to improve the elongation properties to bridge the existing and future cracks over a wide temperature range. It is a self-cured component application which forms an impervious, tough, hard and abrasion resistant coating. It has exceptional strength and inflammability that prevent peeling, fungus and algae growth. It acts as both waterproof and weather durable coating. Based on special Acrylic Polymers, it is ideal for dry substrate where it forms a seamless, joint free, water and weather tight elastic membrane. Rainseal is suitable for applications to most types of roofs – flat or pitched e.g Concrete, GI Sheets, Metal, Asbestos, wood etc. As it forms a white Colour membrane, there is a direct temperature reduction of upto 4C. It gives a coverage of upto 220-250 Sft per 20 L Pail.

• Form: Liquid
• Speciality: Waterproof
• Application: Construction
• Feature: Eco Friendly
• Chemical Name: ZC-SEALCOAT
• Quality: Superior
• Form of Chemicals: Liquid

Elastomeric Coating provides a long-lastingWaterproof Coating Exterior masonry walls—particularly ones that are weathered—have long represented one of the most difficult maintenance challenges for the contractor, the painter, and the waterproofer alike.   Most typical exterior surfaces can be successfully protected and maintained by the regular applications of high quality conventional acrylic latex paints. But even the best paints often tend to split and fail when they have been applied over the surface cracks that develop as masonry ages   A Better Alternative: Elastomeric Wall Coatings  The construction chemical industry has known about the limitations of traditional paints on masonry. For almost that long, the industry has been searching for better alternatives. Early attempts to solve the cracking problem, involved formulating coatings with polymers not generally used in conventional paints. Many of these experimental systems provided acceptable service as dirt-resistant coatings.   Unfortunately, virtually all of the polymers tested formed hard films that were too rigid to accommodate the temperature-related fluctuation in the dimensions of the cracks. Inevitably, coatings based on these hard polymers fractured, exposing the masonry to the elements once again.   Recognizing that hard binders were not the answer, the industry turned to "softer'' polymers with much lower glass transition temperatures. Many of the products investigated were already seeing use as binders for caulks and sealants. Because they had low glass transition temperatures, they furnished excellent elasticity and flexibility over a wide range of temperatures.   ADVANTAGES: Instead of depending on a separate, external component to impart flexibility to the film, 100% acrylic elastomeric polymers derive elasticity from a unique combination of special composition, molecular weight, and crosslinking. As a result, they retain flexibility over periods of time. Moreover, formulations based on the 100% acrylic elastomeric polymers exhibit their elastomeric properties over a broad range of temperatures. Thus, the performance of waterborne coatings based on the acrylic elastomerics remains consistently outstanding under all conditions.   In comparing the different types of binders in other areas of performance, the 100% acrylic binders have a significant edge over styrenated products in the area of ultraviolet stabiiity, over viny! acetate products in the area of hydrolysis resistance, and over both chemistries in the area of dirt pick-up resistance. As a result, on extended exposure, waterborne acrylic coatings are more resistant to chalking and do not yellow as do styrenated products. They are not as vulnerable to damage from ambient moisture as acetate-based systems, and they remain cleaner than both types of non-acrylic systems.   Protection with Decoration & Waterproof Elastomeric Exterior Coating ZC-SEALCOAT is a unique polymer based waterproofing, elastomeric exterior performance coating to protect the concrete structure from degradation in varied climatic conditions. ZC- SEALCOAT is a single component 'Ready to Use' formulation with quick drying properties at room temperature. Its outstanding properties of water repellency coupled with toughness helps to arrest the leakage  during rainy season while its stability against UV radiation keeps the brightness unfazed for years together. Its Two in One performance protects the surface from water seepage & leakage, enhances life of plaster and provides desired aesthetical outlook.   PERFORMANCE FEATURES:- Excellent Water Repellency Resistance to U.V. Radiation Resistance to Fungus and moss. No peel-off tendency Tough and Scratch-proof. Excellent Brightness and finish. Stable at high temperatures. Single component, ready to use system Quick drying at room temperature. No water curing required. Can be pigmented in wide colour range   OTHER SALIENT FEATURES WATER REPELLENT WATER VAPOUR PERMEABLE FUNGUS RESISTANT UV RESISTANT CO diffusion resistant Environment friendly Excellent crack bridging Aesthetic Decoration Cost Effective Covering Capacity   DIRECTIONS FOR USE Surface Preparation : Remove dust, dirt, grease, loose particles, flaking paint, wax, fungus, algae from surface using wire brush. Surface should be washed with water and allowed to dry. Priming : Apply the priming coat using recommended primer or by mixing ZC-SEALCOAT with water in the ratio of 1:2 using brush. Finishing : Finish the surface by applying 2 coats of ZC-SEALCOAT with an intercoat interval of 4 hours. Thinning : ZC-SEALCOAT is ready to apply paint, which does not require thinning. Storage : Keep container closed with a tight lid when not in use. Store in dry place.

• Packaging Type: Plastic Drums
• Country of Origin: India
• Speciality: Elastomeric
• Usage: Industrial Use

100% solid Elastomeric Polyurethane Coating  - CLEAN TECH HPEC 1001(J) : As perASTM D 16 Type V for use in internal pipelines, cooling towers, mounded bullets, etc. in thickness of 1 – 2 mm.  It is 100% v.s.  

• Color: White
• Application: Roof coatings
• Application Method: Other
• State: Liquid Coating
• Place of Origin: Maharashtra, India
• Other Names: Roof Coatings
• MF: -
• EINECS No.: -
• Packaging Details: 1ltr, 4ltr, & 20 litres plastic can
• Model Number: -
• CAS No.: -
• Feature: Dust-proof

Elastomeric Heat Resistant Coating, Waterproof Acrylic Sealants

• Brand Name: Rockhard Polycoat
• Country of Origin: India
• Purity: 90%, 99%
• Grade Standard: Chemical Grade
• Packaging Size: 0-10Kg, 10-20Kg, 20-30Kg
• Usage/Application: Residential And Commercial Use

• Features: Decreases permeability ,Minimizes shrinkage cracks ,Lessens losses by rebound.

• Material: HDPE, PE, Plywood, PP, PVC
• Pattern: Dotted, Plain, Printed
• Texture: Hard, Soft
• Form: Liquid, Solid
• Speciality: Pasting On Walls, Waterproof
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm
• Application: Flooring, Wall Coating
• Feature: Eco Friendly, Optimum Quality, Solvent Resistant, Water Resistant, Waterproof

We are the main supplier of this product.

• 400% elongation. : Waterproof paint
• Anti carbonation: Protect structure from rain water

We offer single component waterproof anti carbonation paint for external walls. rainguard is an elastomeric polymer with the property of viscoelasticity (elasticity) generally having notably low young’s modulus and high yield strain compared with other materials. the coating enables long term protection from vegetation, algae, dust and atmosphere advantages:- resist water ingress, fungus, dirt pick up, waterproof coating. Self curing coating. Application by brush & roller protect structure from rain water crack bridging capacity anti carbonation 400% elongation. uses:- external wall of building bridge commercial & industrial building

• Features: Quick drying, Precisely processed, Balanced composition

We are offering elastomeric coating is a single component acrylic co-polymer. The coating on application form a film to protect the surface against the atmospheric agents such as carbon dioxide, sulphur dioxide, chloride irons, etc the film can withstand up to 200% elongation thereby bridging cracks in the structure due to temperature variation etc. They are available in variety of colors and are highly durable

Elastomeric coatings Lotus Effect Elastomeric Heat Reflective Coating and Elastomeric Heat Reflective Coating. In addition to this, hereunder mentioned are the advantages and technical specifications of the Elastomeric Deck Coating. Heat reflective nano-tech barrier; Cooling load is reduced.

• Brand Name: Berger
• Color: White
• Country of Origin: Made in India
• Features: Seamless Waterproofing Membrane, One Component Ready To Use, Green Pro Certified, Highly Elastic And Crack Bridging (Up To 350% Elongation)
• Packaging Size: 20 ltr
• Packaging Type: Bucket
• Form Of Paint: Paste
• Is It Waterproof: Waterproof
• Warranty: 110 Years
• Chemical Base: Polyurethane modified acrylic dispersion
• Density: 1.25-1.30kg/1@ 30 deg C
• Non Volatile Content: 60 % by weight approx

• Form: Solid
• Material: SILICONE
• Usage: Roof
• Model: SilShield SEC 2400
• Silsheild: GE
• Coating: Elastomer
• Orientation: Horizontal,vertical