Mechanical Gauges Dealers

• Brand Name: TS

We are a leading suployer of mechanical digt gauge use in height or length distance adjust as per digit .

• Size:: 1+0mm,210mm,250mm,290mm

We are the main supplier of this product.

• MOC of Float: PE-HD
• Indicator Housing MOC: ABS
• Level Measuring Range: 0 to 150 cm or, 0 to 250 cm
• Indication Scale: Reversible circular scale of ranges 0 to 150 cm or, 0 to 250 cm (field selectable).
• Dispaly type: Contineous level indication by a pointer type indicator
• Process Connection: 1.1/2

Pointer type Mechanical Level Gauge are suitable for contineous level indication in the tanks for mediums like Water, Oil, Bio Diesel up to 250 cm.

We Offer Mechanical Oil and Air Pressure Gauges Embody a Phosphor Bronze 'C' Type Bourdon as Pressure Sensitive Device and a Precision Sector and Pinion Transmission Mechanism. with the Pressure Application (be of Any Fluid Air), the Bourdon Tube Tries to Stretch Out, Resulting in the Movement of the Geared Sector and the Pinion, Thereby Causing the Pointer to Move On the Graduated Dial Indicating the Line Pressure.While purchasing the product from us, you can choose to make payment through any mode. Our personnel will assist you to pay for your purchases conveniently. Ours is a well-established firm, located in Faridabad(India) and associated with leading names to fulfill varied demands of the buyers.

• Display Type: Analog
• Model Name/Number: FB / FS series
• Brand Name: Imada
• Measuring Range: 10N - 500N
• Packaging Type: Box
• Usage/Application: Laboratory
• Accuracy: +/-0.3% F.S.
• Stroke: 10mm
• Unit of measurement: Please refer to the table below
• Reading method: Real-time track or Peak-hold
• Divisions: 100lines*
• Operating temperature: 0 to +40 degree Celcius
• Weight **: Approx. 630g(FB-100N)
• Accessory: 6 kinds of attachments,Inspection certificate, Instruction manual, Carrying case

• Dynamometer Type: Push Rally
• · Type: Analog measuring instruments
• · Dimensions: 260 x 66 x 36MM
• · Application: Electrical, Packaging, Automotive, Food processing.
• · Model: VT-50/ VT -100/NK-200 for your optional( A
• · Model Name: VT -50

Mechanical Push Pull Gauge Force Gauge Meter Tester     We are offering Mechanical Push Pull Gauge Force Gauge Meter Tester to our clients. Specification:

• Accuracy: +- 1% of full scale
• Nominal Size: 63,100,150,200 and 250 mm
• Case and Bezel: SS 304,Snap Action Bayonet type
• Mounting: Bottom / Surface / Panel / Flush Mounting / Remote

• Brand Name: Shrey
• Off white: Coffee

We are a renowed manufacturer of universal diamete apparatus mechanical comparator gauge spinn gauge spin mechanical comparator ud apparatus ud mechanical comaparator spinn universal diameter apparatus for measurement of various parameters like: outer diameter of ball bearing, inside diameter of ball bearing outer diameter of taper roller bearing, inside diameter of taper roller bearing outer diameter of spherical roller bearing, inside diameter of ball bearing squareness to end face, ovality of bearing inner and outer thickness.

This portable gauge is designed for a gauge length of 20c.m of the reference pins. The deformation isindicated by a 0.002 x 10mm dial gauge attached to the instruments

Baseline® mechanical pinch gauge has a 2 pound capacity especially for weak and damaged hands. Unit has a gold body. The pinch gauge allows for measure tip, key and palmer pinch strength in both pounds and kilograms. Measurements are accurate and repeatable. The Baseline® pinch gauge is made in USA and results are consistent with published Markowitz studies. Maximum force indicator remains at the maximum reading until reset. The strength reading can be viewed as pounds or kilograms. CE Certified. Comes in a protective carrying case.

• white: white

Baseline® mechanical pinch gauge has a 2 pound capacity especially for weak and damaged hands. Unit has a gold body. The pinch gauge allows for measure tip, key and palmer pinch strength in both pounds and kilograms. Measurements are accurate and repeatable. The Baseline® pinch gauge is made in USA and results are consistent with published Markowitz studies. Maximum force indicator remains at the maximum reading until reset. The strength reading can be viewed as pounds or kilograms. CE Certified. Comes in a protective carrying case.

MODEL 56 Plunger Dial Gauge Range 0.8mm to 30mm / 0.08" to 1", Range 0.8mm/0.08inch, One revolution dial gauge. Shock proof, Hardened stem for free clamping, Rigid brass case.   FEATURES Specification: IS, DIN, ANSI & JIS Every gauge carries a calibration certification giving actual values Hardened stem for trouble free clamping Spindle made of stainless steel Fitted with tungsten carbide ball anvil Rigid brass case for increased rigidity Strong and smooth metal bezel Supplied with tolerance pointers Aesthetically appealing protective top cap in black color Special dial Gauges for OEMs also manufactured on request Complete spares and after sales service available 0.001mm x 1mm dial gauge fitted with 8 jewels and conforms to JIS B-7503  

• Accessories: Reference pins in packet of 100 Nos.
• Used: for finding out the linear deformation caused on two reference points fixed on a loading member.
• Dial (mm): 0.002 x 10mm
• Length: 20c.m
• Model: ASI-536

This is Snow Gauge (mechnical type) mesururing stick secured inside a metal container and anchored to the ground.when the snow fall is ended snow melt water come out through the pipe say Snow water equivalent.Melt water collect in the mesuring funnel Gauge and mesure it by stick and multipley by 10 to get actual snow fall.This is the simplest one snow gauge in the market.

• Type: Mechanical
• Diameter: 52 and 60 mm
• Sweep Angle: Concentric/Eccentric.
• Special Features: Built in red glow bulb for over heat snap action system

Liquid filled Vapour Pressure Gauge with thin bore capillary well shielded with stainless steel wire braiding & plastic sleeve against mechanical damages &electrical short-circuiting.Designed to assure linear indication.   Specifications : Diameter: 52 mm or 60 mm Capillary Length Type of Braiding. Range Sweep Type of end connection   Note: Dial range as mentioned above but can bechanged to suit your requirement. Also othermodification/ non-standard specifications possiblein case of bulk supply.